[Mesa-dev] [PATCH] radv: add separate fmask tile swizzle counter.

Dave Airlie airlied at gmail.com
Fri Aug 4 05:55:28 UTC 2017


From: Dave Airlie <airlied at redhat.com>

This mirrors what Marek has done for radeonsi, and uses
a separate counter to handle the fmask surface for MSAA
MRTs.

Signed-off-by: Dave Airlie <airlied at redhat.com>
---
 src/amd/vulkan/radv_device.c  | 2 +-
 src/amd/vulkan/radv_image.c   | 5 ++++-
 src/amd/vulkan/radv_private.h | 7 ++++++-
 3 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/src/amd/vulkan/radv_device.c b/src/amd/vulkan/radv_device.c
index cb68b52..65a2172 100644
--- a/src/amd/vulkan/radv_device.c
+++ b/src/amd/vulkan/radv_device.c
@@ -3038,7 +3038,7 @@ radv_initialise_color_surface(struct radv_device *device,
 		va = device->ws->buffer_get_va(iview->bo) + iview->image->offset + iview->image->fmask.offset;
 		cb->cb_color_fmask = va >> 8;
 		if (device->physical_device->rad_info.chip_class < GFX9)
-			cb->cb_color_fmask |= iview->image->surface.tile_swizzle;
+			cb->cb_color_fmask |= iview->image->fmask.tile_swizzle;
 	} else {
 		cb->cb_color_fmask = cb->cb_color_base;
 	}
diff --git a/src/amd/vulkan/radv_image.c b/src/amd/vulkan/radv_image.c
index 8456d3a..7ff0b20 100644
--- a/src/amd/vulkan/radv_image.c
+++ b/src/amd/vulkan/radv_image.c
@@ -483,7 +483,7 @@ si_make_texture_descriptor(struct radv_device *device,
 
 		fmask_state[0] = va >> 8;
 		if (device->physical_device->rad_info.chip_class < GFX9)
-			fmask_state[0] |= image->surface.tile_swizzle;
+			fmask_state[0] |= image->fmask.tile_swizzle;
 		fmask_state[1] = S_008F14_BASE_ADDRESS_HI(va >> 40) |
 			S_008F14_DATA_FORMAT_GFX6(fmask_format) |
 			S_008F14_NUM_FORMAT_GFX6(num_format);
@@ -615,6 +615,8 @@ radv_image_get_fmask_info(struct radv_device *device,
 	info.samples = 1;
 	fmask.flags = image->surface.flags | RADEON_SURF_FMASK;
 
+	info.surf_index = &device->fmask_mrt_offset_counter;
+
 	/* Force 2D tiling if it wasn't set. This may occur when creating
 	 * FMASK for MSAA resolve on R6xx. On R6xx, the single-sample
 	 * destination buffer must have an FMASK too. */
@@ -643,6 +645,7 @@ radv_image_get_fmask_info(struct radv_device *device,
 	out->tile_mode_index = fmask.u.legacy.tiling_index[0];
 	out->pitch_in_pixels = fmask.u.legacy.level[0].nblk_x;
 	out->bank_height = fmask.u.legacy.bankh;
+	out->tile_swizzle = fmask.tile_swizzle;
 	out->alignment = MAX2(256, fmask.surf_alignment);
 	out->size = fmask.surf_size;
 }
diff --git a/src/amd/vulkan/radv_private.h b/src/amd/vulkan/radv_private.h
index 9c6ba76..f208ec0 100644
--- a/src/amd/vulkan/radv_private.h
+++ b/src/amd/vulkan/radv_private.h
@@ -548,8 +548,12 @@ struct radv_device {
 	/* Backup in-memory cache to be used if the app doesn't provide one */
 	struct radv_pipeline_cache *                mem_cache;
 
+	/*
+	 * use different counters so MSAA MRTs get consecutive surface indices,
+	 * even if MASK is allocated in between.
+	 */
 	uint32_t image_mrt_offset_counter;
-
+	uint32_t fmask_mrt_offset_counter;
 	struct list_head shader_slabs;
 	mtx_t shader_slab_mutex;
 };
@@ -1197,6 +1201,7 @@ struct radv_fmask_info {
 	unsigned bank_height;
 	unsigned slice_tile_max;
 	unsigned tile_mode_index;
+	unsigned tile_swizzle;
 };
 
 struct radv_cmask_info {
-- 
2.9.4



More information about the mesa-dev mailing list