[Mesa-users] EGL DRI Driver Loading Error

[Chia-I Wu]

On Tue, Feb 22, 2011 at 9:56 PM, Srini <srini_rajini at yahoo.com> wrote:
> [srini at RHEL2 ~]$ xdpyinfo |grep GLX
> [srini at RHEL2 ~]$
>
> Doesn't print anything.
> [srini at RHEL2 ~]$ xdpyinfo |grep DRI2
>     DRI2
> [srini at RHEL2 ~]$
>
> This prints DRI2.
>
> I couldn't understand what it is significant for, can you please explain me?
>
> can you please confirm me the configurationn i am doing is correct for
> enabling hardware acceleration?
The EGL driver you are using uses GLX protocol to get a list of
supported visuals from the server.

With i915, you might prefer

  $ ./configure --enable-gles2 --with-dri-drivers=i915 --disable-gallium

and be sure egl_dri2 is listed in "EGL drivers:" (which depends on
xcb-dri2 and xcb-fixes).

You may also want to use Mesa 7.10.


> Regards,
> Srini.
>
> ________________________________
> From: Chia-I Wu <olvaffe at gmail.com>
> To: Srini <srini_rajini at yahoo.com>
> Cc: mesa-users at lists.freedesktop.org
> Sent: Wed, 23 February, 2011 12:20:22 AM
> Subject: Re: [Mesa-users] EGL DRI Driver Loading Error
>
> On Tue, Feb 22, 2011 at 9:31 AM, Srini <srini_rajini at yahoo.com> wrote:
>> I have solved the loading problem by building the Mesa again with below
>> configuration
>>
>> ./configure --prefix=/usr/local --enable-gles2 --enable-egl
>> --with-egl-platforms=drm --enable-gallium-egl=i915 --with-dri-drivers=i915
>> --disable-glw --enable-gallium-intel --with-state-trackers=egl,es,dri
>>
>> this configuration will install in /ur/local/ and removed all the entries
>> from /usr/
>>
>> Now the gles applicaton is running fine but it again goes through software
>> with below warning message.
>>
>>
>> ********************************************************************************************
>> ./sphere
>> libEGL warning: GLX/DRI2 is not supported
> This message means that either GLX or DRI2 extension is not available.
> What does
>
>   $ xdpyinfo | grep GLX
>   $ xdpyinfo | grep DRI2
>
> give on your machine?
>> libEGL warning: use software fallback
>>
>> *********************************************************************************************
>>
>> How can i enable the hardware rendering.
>> My Desktop has support for advanced graphics.
>>
>> glxinfo |grep renderin returns
>> Direct rendering yes.
>>
>>
>> anyone please give me hint.
>>
>> Regards,
>> Srini.
>> ________________________________
>> From: Srini <srini_rajini at yahoo.com>
>> To: mesa-users at lists.freedesktop.org
>> Sent: Tue, 22 February, 2011 9:00:10 PM
>> Subject: [Mesa-users] EGL DRI Driver Loading Error
>>
>> Dear All,
>>
>> May be i could have write the same earlier, but still i am not clear, deep
>> apolozise for fillup your inbox.
>>
>>     I downloaded Mesa 7.8.2 and configured with
>> ./configure --prefix=/usr --enable-gles2 --enable-egl
>> --with-egl-platforms=x11,drm --enable-gallium-egl=i915
>> --with-dri-drivers=i915,swrast --disable-glw
>>
>> I belive this configuration will built hardware pipe line driver for i915
>> GPU
>>
>> after built and install. i can see libraries in /usr/lib/ and
>> /usr/lib/egl/
>>
>> i have simple gles test application runs pretty good with software
>> acceleration in different machine. when i try to run the same application
>> by
>> loading the newly built mesa librires i am getting below error.
>>
>> ****************************************************************************************************************
>> libEGL warning: Could not open driver /usr/lib/egl/egl_glx
>> (/usr/lib/egl/egl_glx: cannot open shared object file: No such file or
>> directory)
>> libEGL warning: The driver can be overridden by setting EGL_DRIVER
>> Error returned by eglCreateWindowSurface - error = 0x3005
>>
>> ****************************************************************************************************************
>> if i do set EGL_DRIVER=/usr/lib/egl/egl_dri2.so i am getting the same
>> error.
>>
>> My question is first is.
>> 1) is the configuration options what i am enabling is right?to get the
>> hardware GPU enabled GLES rendering.
>> 2) How can i resolve above errors while running the application?
>> 3) after appliaction start runs successfully how can i ensure that it goes
>> through hardware pipe line only?
>>
>> could anyone please give me hint to solve this issue.
>>
>> eagerly waiting for reply.
>>
>> Many thanks in advance.
>>
>> Regards,
>> Srini.
>>
>>
>>
>> _______________________________________________
>> mesa-users mailing list
>> mesa-users at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/mesa-users
>>
>>
>
>
>
> --
> olv at LunarG.com
>
>



-- 
olv at LunarG.com