problem with dell latitude

[Bartłomiej Knabel]

after recompiling in given order result is the same:

# cat /usr/include/libqmi-glib/qmi-version.h  | grep "define
> QMI_MBIM_QMUX_SUPPORTED"
#define _QMI_VERSION_H_
 * This section defines types that are used to identify the libqmi-glib
version.
#define QMI_MAJOR_VERSION (1)
#define QMI_MINOR_VERSION (18)
#define QMI_MICRO_VERSION (0)
#define QMI_CHECK_VERSION(major,minor,micro)                         \
 * QMI_MBIM_QMUX_SUPPORTED:
 * defined and set to either or 1 or 0.
 *  #if QMI_MBIM_QMUX_SUPPORTED
#define QMI_MBIM_QMUX_SUPPORTED 1

and one more time output from MM --debug:

https://pastebin.com/KJsnvp4t

2017-07-18 14:29 GMT+02:00 Bartłomiej Knabel <bartlomiej.knabel at gmail.com>:

> I don't remember order, but I can recompile them one more time with order
> You provided.
>
> here is output:
>
> $ cat /usr/include/libqmi-glib/qmi-version.h  | grep "define
> QMI_MBIM_QMUX_SUPPORTED"
> #define _QMI_VERSION_H_
>  * This section defines types that are used to identify the libqmi-glib
> version.
> #define QMI_MAJOR_VERSION (1)
> #define QMI_MINOR_VERSION (18)
> #define QMI_MICRO_VERSION (0)
> #define QMI_CHECK_VERSION(major,minor,micro)                         \
>  * QMI_MBIM_QMUX_SUPPORTED:
>  * defined and set to either or 1 or 0.
>  *  #if QMI_MBIM_QMUX_SUPPORTED
> #define QMI_MBIM_QMUX_SUPPORTED 1
>
>
> 2017-07-18 14:16 GMT+02:00 Aleksander Morgado <aleksander at aleksander.es>:
>
>> On Tue, Jul 18, 2017 at 2:00 PM, Bartłomiej Knabel
>> <bartlomiej.knabel at gmail.com> wrote:
>> >> Is this a custom system? Looks like ModemManager isn't built with QMI
>> >> and/or with an old libqmi not supporting QMI over MBIM. Which libqmi
>> >> and libmbim versions are being used?
>> >>
>> >> Once the initial failure happens during the Set Radio State command,
>> >> we should have been trying the "QMI FCC auth" sequence with QMI over
>> >> MBIM, but I don't see that in the logs.
>> >>
>> >
>> > I've used following libraries:
>> >
>> > https://freedesktop.org/software/libqmi/libqmi-1.18.0.tar.xz
>> > https://www.freedesktop.org/software/libmbim/libmbim-1.14.0.tar.xz
>> > https://www.freedesktop.org/software/ModemManager/ModemManag
>> er-1.6.8.tar.xz
>> >
>> > on all of them I've run:
>> > ./configure --prefix=/usr
>> > make
>> > make install
>> >
>> > maybe here is something wrong?
>>
>> In which order did you built and install them? The order should be:
>> libmbim, libqmi, MM. This is so that libqmi is built with QMI over
>> MBIM support. You can run this to check whether that part is ok or
>> not:
>>
>> $ cat /usr/include/libqmi-glib/qmi-version.h  | grep "define
>> QMI_MBIM_QMUX_SUPPORTED"
>> #define QMI_MBIM_QMUX_SUPPORTED 1
>>
>> --
>> Aleksander
>> https://aleksander.es
>>
>
>
>
> --
> pozdrawiam,
> Bartłomiej Knabel
>



-- 
pozdrawiam,
Bartłomiej Knabel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/modemmanager-devel/attachments/20170718/88124481/attachment.html>