AW: MC7455 not listed as usb device any more after reboot
Thomas Lang
thomas.lang at tactilo.eu
Mon Mar 20 09:45:34 UTC 2017
Hi Dan,
thanks for your comments.
I have included a trace of the working start and the reboot. I noticed that in the reboot case the usb 3-1.3 device is not detected anymore. The usb 3-1 is an ehci-pci. Would it help to reset the ehci-pci? And if so how would I do this.
Thanks a lot for any coment,
Thomas
Cold Start
PCEngines apu2
coreboot build 20160311
4080 MB ECC DRAM
SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci at i0cf8/usb at 10/usb-*@1
2: /pci at i0cf8/usb at 10/usb-*@2
3: /pci at i0cf8/usb at 10/usb-*@3
4: /pci at i0cf8/usb at 10/usb-*@4
5: /pci at i0cf8/*@14,7
6: /pci at i0cf8/*@11/drive at 0/disk at 0
7: /pci at i0cf8/*@11/drive at 1/disk at 0
8: /rom at genroms/pxe.rom
9: pxen0
10: scon1
11:
Found 23 PCI devices (max PCI bus is 04)
Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
Copying PIR from 0xdffdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003
Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (wiv at coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 80x24
IO4 0
Turning on vga text mode console
SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCI extcap 0x1 @ feb22500
XHCI protocol USB 3.00, 2 ports (offset 1), def 0
XHCI protocol USB 2.00, 2 ports (offset 3), def 10
XHCI extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci at i0cf8/*@14,7
Searching bootorder for: /rom at img/memtest
Searching bootorder for: /rom at img/setup
ata0-0: KINGSTON SMS200S3120G ATA-8 Hard-Disk (111 GiBytes)
Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
XHCI no devices found
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
Running option rom at c100:0003
iPXE (http://ipxe.org) 00:00.0 C100 PCI2.10 PnP PMMpmm call arg1=1
pmm call arg1=0
+DFF49730pmm call arg1=1
pmm call arg1=0
+DFE89730 C100
Searching bootorder for: /rom at genroms/pxe.rom
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2e90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=234441648
Space available for UMB: c2000-ef000, f0000-f2e90
Returned 262144 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009f800 = 1 RAM
1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000dffae000 = 1 RAM
4: 00000000dffae000 - 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
6: 0000000100000000 - 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
[ 0.000000] Linux version 4.6.2-040602-generic (kernel at gloin) (gcc version 5.3.1 20160528 (Ubuntu 5.3.1-21ubuntu11) ) #201606100516 SMP Fri Jun 10 09:18:34 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-generic root= UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffadfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dffae000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xdffae max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f] mapped at [ffff8800000f2f30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x341e8000-0x360ebfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02 AMD COREBOOT 00010001 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040
[ 0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffadfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffae000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff88011ec00000 s93464 r8192 d29416 u524288
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027960
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-generic root=UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3994972K/4177200K available (6805K kernel code, 1330K rwdata, 3076K rodata, 1764K init, 2420K bss, 182228K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 998.026 MHz processor
[ 0.000119] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.05 BogoMIPS (lpj=3992104)
[ 0.010794] pid_max: default: 32768 minimum: 301
[ 0.015513] ACPI: Core revision 20160108
[ 0.041757] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.048200]
[ 0.049837] Security Framework initialized
[ 0.053995] Yama: becoming mindful.
[ 0.057562] AppArmor: AppArmor initialized
[ 0.063195] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.075496] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084740] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.091650] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.100092] CPU: Physical Processor ID: 0
[ 0.104134] CPU: Processor Core ID: 0
[ 0.107846] mce: CPU supports 6 MCE banks
[ 0.111906] LVT offset 1 assigned for vector 0xf9
[ 0.116651] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.122171] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.129756] Freeing SMP alternatives memory: 24K (ffffffff81f07000 - ffffffff81f0d000)
[ 0.144109] ftrace: allocating 27464 entries in 108 pages
[ 0.193835] smpboot: Max logical packages: 1
[ 0.198197] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.205421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.355533] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.363607] Performance Events: AMD PMU driver.
[ 0.368197] ... version: 0
[ 0.372252] ... bit width: 48
[ 0.376367] ... generic registers: 4
[ 0.380398] ... value mask: 0000ffffffffffff
[ 0.385750] ... max period: 00007fffffffffff
[ 0.391108] ... fixed-purpose events: 0
[ 0.395148] ... event mask: 000000000000000f
[ 0.403046] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.411593] x86: Booting SMP configuration:
[ 0.415800] .... node #0, CPUs: #1 #2 #3
[ 0.661952] x86: Booted up 1 node, 4 CPUs
[ 0.666231] smpboot: Total of 4 processors activated (7984.05 BogoMIPS)
[ 0.676214] devtmpfs: initialized
[ 0.679931] x86/mm: Memory block size: 128MB
[ 0.702240] evm: security.selinux
[ 0.705580] evm: security.SMACK64
[ 0.708914] evm: security.SMACK64EXEC
[ 0.712598] evm: security.SMACK64TRANSMUTE
[ 0.716715] evm: security.SMACK64MMAP
[ 0.720398] evm: security.ima
[ 0.723383] evm: security.capability
[ 0.727573] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.737543] pinctrl core: initialized pinctrl subsystem
[ 0.743172] RTC time: 10:59:33, date: 03/17/17
[ 0.748135] NET: Registered protocol family 16
[ 0.763576] cpuidle: using governor ladder
[ 0.773701] cpuidle: using governor menu
[ 0.777662] PCCT header not found.
[ 0.781375] ACPI: bus type PCI registered
[ 0.785409] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.792189] PCI: Using configuration type 1 for base access
[ 0.797792] PCI: Using configuration type 1 for extended access
[ 0.814494] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.820884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.828753] ACPI: Added _OSI(Module Device)
[ 0.832962] ACPI: Added _OSI(Processor Device)
[ 0.837422] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.842145] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.848542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.871435] ACPI: Interpreter enabled
[ 0.875215] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.879703] ACPI: Using IOAPIC for interrupt routing
[ 0.884751] HEST: Table parsing has been initialized.
[ 0.889863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.909859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.916091] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.924694] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.932940] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.944494] PCI host bridge to bus 0000:00
[ 0.948617] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.955454] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.962270] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.969179] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.976071] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.982978] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.989576] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.995753] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 1.001978] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 1.008173] pci 0000:00:02.5: System wakeup disabled by ACPI
[ 1.014852] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 1.020883] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.026494] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 1.043635] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 1.055606] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 1.067612] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 1.073246] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.083283] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 1.089202] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
[ 1.096131] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
[ 1.103066] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
[ 1.109921] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
[ 1.116887] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
[ 1.123803] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
[ 1.130771] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.136139] vgaarb: loaded
[ 1.140407] PCI: Using ACPI for IRQ routing
[ 1.145320] NetLabel: Initializing
[ 1.148761] NetLabel: domain hash size = 128
[ 1.153165] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.158194] NetLabel: unlabeled traffic allowed by default
[ 1.164161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.169199] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.178152] clocksource: Switched to clocksource hpet
[ 1.210815] VFS: Disk quotas dquot_6.6.0
[ 1.214845] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.222217] AppArmor: AppArmor Filesystem Enabled
[ 1.227248] pnp: PnP ACPI init
[ 1.230978] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 1.238450] pnp: PnP ACPI: found 3 devices
[ 1.256658] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.265632] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 1.270630] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 1.276750] pci 0000:00:02.2: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.283566] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 1.288557] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 1.294682] pci 0000:00:02.3: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.301497] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 1.306496] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 1.312658] pci 0000:00:02.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.319474] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 1.324471] pci 0000:00:02.5: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.331537] NET: Registered protocol family 2
[ 1.336633] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.344293] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.351334] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.358004] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.364148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.370895] NET: Registered protocol family 1
[ 1.376569] Unpacking initramfs...
[ 3.691122] Freeing initrd memory: 31760K (ffff8800341e8000 - ffff8800360ec000)
[ 3.698516] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.704992] software IO TLB [mem 0xdbfae000-0xdffae000] (64MB) mapped at [ffff8800dbfae000-ffff8800dffadfff]
[ 3.715093] perf: AMD NB counters detected
[ 3.719239] perf: AMD L2I counters detected
[ 3.723558] LVT offset 0 assigned for vector 0x400
[ 3.728483] perf: AMD IBS detected (0x000000ff)
[ 3.733466] Scanning for low memory corruption every 60 seconds
[ 3.740949] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.747287] audit: initializing netlink subsys (disabled)
[ 3.752763] audit: type=2000 audit(1489748375.520:1): initialized
[ 3.760489] Initialise system trusted keyring
[ 3.765273] workingset: timestamp_bits=33 max_order=20 bucket_order=0
[ 3.780582] zbud: loaded
[ 3.784087] Key type big_key registered
[ 3.789840] Key type asymmetric registered
[ 3.794005] Asymmetric key parser 'x509' registered
[ 3.799160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.806735] io scheduler noop registered
[ 3.810715] io scheduler deadline registered (default)
[ 3.816024] io scheduler cfq registered
[ 3.822308] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[ 3.829324] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.835999] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[ 3.842981] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.849598] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
[ 3.856582] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.863195] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt
[ 3.870188] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 3.876798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.882446] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.889377] GHES: Failed to enable APEI firmware first mode.
[ 3.895316] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.922629] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.950774] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.967506] PPP generic driver version 2.4.2
[ 3.972067] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.730606] tsc: Refined TSC clocksource calibration: 998.128 MHz
[ 4.736739] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65d64e77, max_idle_ns: 881590512558 ns
[ 5.034743] i8042: No controller found
[ 5.038873] mousedev: PS/2 mouse device common for all mice
[ 5.044772] rtc_cmos 00:01: RTC can wake from S4
[ 5.049777] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 5.055987] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 5.063152] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.070610] NET: Registered protocol family 10
[ 5.075957] NET: Registered protocol family 17
[ 5.081540] microcode: CPU0: patch_level=0x07030105
[ 5.086482] microcode: CPU1: patch_level=0x07030105
[ 5.091389] microcode: CPU2: patch_level=0x07030105
[ 5.096300] microcode: CPU3: patch_level=0x07030105
[ 5.101348] microcode: Microcode Update Driver: v2.01 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 5.110893] registered taskstats version 1
[ 5.115123] Loading compiled-in X.509 certificates
[ 5.132063] Loaded X.509 cert 'Build time autogenerated kernel key: 5416e2c482d66dd0c34159ae8c9fc4066f19244c'
[ 5.142196] zswap: loaded using pool lzo/zbud
[ 5.159953] Key type encrypted registered
[ 5.164037] AppArmor: AppArmor sha1 policy hashing enabled
[ 5.169578] ima: No TPM chip found, activating TPM-bypass!
[ 5.175168] evm: HMAC attrs: 0x1
[ 5.179501] Magic number: 9:759:982
[ 5.183644] rtc_cmos 00:01: setting system clock to 2017-03-17 10:59:38 UTC (1489748378)
[ 5.200734] Freeing unused kernel memory: 1764K (ffffffff81d4e000 - ffffffff81f07000)
[ 5.208891] Write protecting the kernel read-only data: 12288k
[ 5.216908] Freeing unused kernel memory: 1372K (ffff8800016a9000 - ffff880001800000)
[ 5.237754] Freeing unused kernel memory: 1020K (ffff880001b01000 - ffff880001c00000)
Loading, please wait...
starting version 229
[ 5.290125] random: systemd-udevd urandom read with 6 bits of entropy available
[ 5.419935] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.429471] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 5.430392] ACPI: Power Button [PWRB]
[ 5.430878] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.431055] ACPI: Power Button [PWRF]
[ 5.543925] pps_core: LinuxPPS API ver. 1 registered
[ 5.549405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 5.565214] SCSI subsystem initialized
[ 5.573216] PTP clock support registered
[ 5.587395] dca service started, version 1.12.1
[ 5.601719] sdhci: Secure Digital Host Controller Interface driver
[ 5.608578] sdhci: Copyright(c) Pierre Ossman
[ 5.627226] ACPI: bus type USB registered
[ 5.639685] usbcore: registered new interface driver usbfs
[ 5.646758] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 5.655279] usbcore: registered new interface driver hub
[ 5.657476] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 5.657478] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 5.671214] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 5.688548] pps pps0: new PPS source ptp0
[ 5.697450] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.702658] igb 0000:01:00.0: added PHC on eth0
[ 5.702663] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.702669] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:6a:cc
[ 5.702675] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 5.702680] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.734491] pps pps1: new PPS source ptp1
[ 5.734498] igb 0000:02:00.0: added PHC on eth1
[ 5.734502] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.734507] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:6a:cd
[ 5.734512] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[ 5.734517] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.778863] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 5.788003] clocksource: Switched to clocksource tsc
[ 5.788612] usbcore: registered new device driver usb
[ 5.810895] scsi host0: ahci
[ 5.816595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.824411] scsi host1: ahci
[ 5.828192] pps pps2: new PPS source ptp2
[ 5.828198] ata1: SATA max UDMA/133 abar m1024 at 0xfeb25000 port 0xfeb25100 irq 19
[ 5.828223] ata2: SATA max UDMA/133 abar m1024 at 0xfeb25000 port 0xfeb25180 irq 19
[ 5.853452] ehci-pci: EHCI PCI platform driver
[ 5.857803] igb 0000:03:00.0: added PHC on eth2
[ 5.857835] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.857841] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:6a:ce
[ 5.857847] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[ 5.857854] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.894023] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.899949] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 5.925312] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 5.935204] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.942668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.454762] usb 3-1: new high-speed USB device number 2 using ehci-pci
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 6.591306] usb 3-1: New USB device found, idVendor=0438, idProduct=7900
[ 6.598409] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.608489] hub 3-1:1.0: USB hub found
[ 6.613299] hub 3-1:1.0: 4 ports detected
Begin: Will now check root file system ... fsck from util-linux 2.27.1
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
/dev/sda1: recovering journal
/dev/sda1: clean, 161082/7069696 files, 1238842/28260864 blocks
done.
[ 6.709112] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 6.890809] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
[ 6.936169] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.954952] systemd[1]: Detected architecture x86-64.
Welcome to Ubuntu 16.04.1 LTS!
[ 6.971196] systemd[1]: Set hostname to <ubuntu>.
[ 6.998808] usb 3-1.3: config 1 has an invalid interface number: 8 but max is 4
[ 7.006319] usb 3-1.3: config 1 has an invalid interface number: 10 but max is 4
[ 7.013758] usb 3-1.3: config 1 has no interface number 1
[ 7.019187] usb 3-1.3: config 1 has no interface number 4
[ 7.027253] usb 3-1.3: New USB device found, idVendor=1199, idProduct=9071
[ 7.034250] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.041633] usb 3-1.3: Product: Sierra Wireless MC7455 Qualcomm® Snapdragon™ X7 LTE-A
[ 7.049808] usb 3-1.3: Manufacturer: Sierra Wireless, Incorporated
[ 7.056027] usb 3-1.3: SerialNumber: LQ61620344021006
[ 7.156329] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 7.175152] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 7.191616] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ 7.214966] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 7.230992] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 7.251000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 7.270991] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.286922] systemd[1]: Reached target User and Group Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 7.306900] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 7.322923] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 7.339040] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 7.358998] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.374988] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 7.391148] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 7.407192] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 7.435198] systemd[1]: Starting Set console keymap...
Starting Set console keymap...
[ 7.453983] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 7.481658] systemd[1]: Starting Nameserver information manager...
Starting Nameserver information manager...
[ 7.501634] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 7.517569] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 7.533684] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 7.554556] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 7.571627] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 7.590992] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 7.623140] systemd[1]: Started Read required files in advance.
[ OK ] Started Read required files in advance.
[ 7.643325] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 7.661390] systemd[1]: Starting Uncomplicated firewall...
Starting Uncomplicated firewall...
[ 7.675145] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 7.699912] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 7.715135] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 7.731075] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 7.747948] systemd[1]: Started Set console keymap.
[ OK ] Started Set console keymap.
[ 7.763910] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 7.805763] systemd[1]: Started Load Kernel Modules.
[ OK ] Started Load Kernel Modules.
[ 7.823686] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[ 7.834192] systemd[1]: ureadahead.service: Unit entered failed state.
[ 7.840805] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[ 7.848462] systemd[1]: Started Uncomplicated firewall.
[ OK ] Started Uncomplicated firewall.
[ 7.879500] systemd[1]: Started Nameserver information manager.
[ OK ] Started Nameserver information manager.
[ 7.900381] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Reached target Local File Systems (Pre).
Starting Flush Journal to Persistent Storage...
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting LSB: AppArmor initialization...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Load/Save Random Seed...
Starting udev Coldplug all Devices...
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Set console font and keymap.
[ OK ] Started LSB: AppArmor initialization.
Starting Raise network interfaces...
[ OK ] Created slice system-getty.slice.
[ OK ] Started ifup for enp2s0.
[ OK ] Found device I210 Gigabit Network Connection.
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device KINGSTON_SMS200S3120G 5.
Activating swap /dev/disk/by-uuid/d...3-00a7-45e6-8ea5-f5b318efb217...
[ OK ] Activated swap /dev/disk/by-uuid/d30b3493-00a7-45e6-8ea5-f5b318efb217.
[ OK ] Reached target Swap.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
[ OK ] Listening on UUID daemon activation socket.
[ OK ] Reached target Sockets.
[ OK ] Started Daily apt activities.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Started Trigger resolvconf update for networkd DNS.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
Starting System Logging Service...
Starting LSB: daemon to balance interrupts for SMP systems...
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
Starting Login Service...
Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
Starting LSB: Record successful boot for GRUB...
[ OK ] Started GPS (Global Positioning System) Daemon.
Starting Permit User Sessions...
Starting Accounts Service...
Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started System Logging Service.
[ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
[ OK ] Started Permit User Sessions.
[ OK ] Started LSB: Record successful boot for GRUB.
[ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[ OK ] Started LSB: daemon to balance interrupts for SMP systems.
[ OK ] Started Network Manager.
[ OK ] Started Login Service.
Starting Network Manager Script Dispatcher Service...
Starting Network Manager Wait Online...
Starting Authenticate and Authorize Users to Run Privileged Tasks...
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Network Manager Script Dispatcher Service.
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[ OK ] Started Accounts Service.
Starting Hostname Service...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Hostname Service.
Starting WPA supplicant...
[ OK ] Started WPA supplicant.
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Starting OpenBSD Secure Shell server...
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting /etc/rc.local Compatibility...
Starting LSB: Starts or stops the xinetd daemon....
[ OK ] Started ISC DHCP IPv4 server.
Starting LSB: Start xrdp and sesman daemons...
[ OK ] Started /etc/rc.local Compatibility.
Starting Terminate Plymouth Boot Screen...
Starting Hold until boot process finishes up...
[ OK ] Started Terminate Plymouth Boot Screen.
[ OK ] Started Hold until boot process finishes up.
[ OK ] Started Getty on tty1.
Starting Set console scheme...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started LSB: Starts or stops the xinetd daemon..
[ OK ] Started Set console scheme.
[ OK ] Started LSB: Start xrdp and sesman daemons.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Stop ureadahead data collection 45s after completed startup.
[ OK ] Started Update UTMP about System Runlevel Changes.
Ubuntu 16.04.1 LTS ubuntu ttyS0
ubuntu login: go
Password:
Last login: Fri Mar 17 11:51:00 CET 2017 on ttyS0
Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.6.2-040602-generic x86_64)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
go at ubuntu:~$ lsusb
Bus 003 Device 003: ID 1199:9071 Sierra Wireless, Inc.
Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
go at ubuntu:~$
Warm reboot -F
PCEngines apu2
coreboot build 20160311
4080 MB ECC DRAM
SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci at i0cf8/usb at 10/usb-*@1
2: /pci at i0cf8/usb at 10/usb-*@2
3: /pci at i0cf8/usb at 10/usb-*@3
4: /pci at i0cf8/usb at 10/usb-*@4
5: /pci at i0cf8/*@14,7
6: /pci at i0cf8/*@11/drive at 0/disk at 0
7: /pci at i0cf8/*@11/drive at 1/disk at 0
8: /rom at genroms/pxe.rom
9: pxen0
10: scon1
11:
Found 23 PCI devices (max PCI bus is 04)
Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
Copying PIR from 0xdffdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003
Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (wiv at coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 80x24
IO4 0
Turning on vga text mode console
SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCI extcap 0x1 @ feb22500
XHCI protocol USB 3.00, 2 ports (offset 1), def 0
XHCI protocol USB 2.00, 2 ports (offset 3), def 10
XHCI extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci at i0cf8/*@14,7
Searching bootorder for: /rom at img/memtest
Searching bootorder for: /rom at img/setup
ata0-0: KINGSTON SMS200S3120G ATA-8 Hard-Disk (111 GiBytes)
Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
XHCI no devices found
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
Running option rom at c100:0003
iPXE (http://ipxe.org) 00:00.0 C100 PCI2.10 PnP PMMpmm call arg1=1
pmm call arg1=0
+DFF49730pmm call arg1=1
pmm call arg1=0
+DFE89730 C100
Searching bootorder for: /rom at genroms/pxe.rom
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2e90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=234441648
Space available for UMB: c2000-ef000, f0000-f2e90
Returned 262144 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009f800 = 1 RAM
1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000dffae000 = 1 RAM
4: 00000000dffae000 - 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
6: 0000000100000000 - 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
[ 0.000000] Linux version 4.6.2-040602-generic (kernel at gloin) (gcc version 5.3.1 20160528 (Ubuntu 5.3.1-21ubuntu11) ) #201606100516 SMP Fri Jun 10 09:18:34 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-generic root=UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffadfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dffae000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xdffae max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f] mapped at [ffff8800000f2f30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x341e8000-0x360ebfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02 AMD COREBOOT 00010001 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040
[ 0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffadfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdffae000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff88011ec00000 s93464 r8192 d29416 u524288
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027960
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-generic root=UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3994972K/4177200K available (6805K kernel code, 1330K rwdata, 3076K rodata, 1764K init, 2420K bss, 182228K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 998.034 MHz processor
[ 0.000149] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.06 BogoMIPS (lpj=3992136)
[ 0.010850] pid_max: default: 32768 minimum: 301
[ 0.015549] ACPI: Core revision 20160108
[ 0.041995] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.048462]
[ 0.050083] Security Framework initialized
[ 0.054211] Yama: becoming mindful.
[ 0.057774] AppArmor: AppArmor initialized
[ 0.063571] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.075556] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084527] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.091339] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.099621] CPU: Physical Processor ID: 0
[ 0.103679] CPU: Processor Core ID: 0
[ 0.107363] mce: CPU supports 6 MCE banks
[ 0.111421] LVT offset 1 assigned for vector 0xf9
[ 0.116195] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.121742] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.129423] Freeing SMP alternatives memory: 24K (ffffffff81f07000 - ffffffff81f0d000)
[ 0.143889] ftrace: allocating 27464 entries in 108 pages
[ 0.194575] smpboot: Max logical packages: 1
[ 0.198894] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.206175] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.359506] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.367632] Performance Events: AMD PMU driver.
[ 0.372236] ... version: 0
[ 0.376262] ... bit width: 48
[ 0.380407] ... generic registers: 4
[ 0.384448] ... value mask: 0000ffffffffffff
[ 0.389774] ... max period: 00007fffffffffff
[ 0.395131] ... fixed-purpose events: 0
[ 0.399160] ... event mask: 000000000000000f
[ 0.406879] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.415446] x86: Booting SMP configuration:
[ 0.419659] .... node #0, CPUs: #1 #2 #3
[ 0.665879] x86: Booted up 1 node, 4 CPUs
[ 0.670154] smpboot: Total of 4 processors activated (7984.64 BogoMIPS)
[ 0.680377] devtmpfs: initialized
[ 0.684040] x86/mm: Memory block size: 128MB
[ 0.706675] evm: security.selinux
[ 0.710044] evm: security.SMACK64
[ 0.713403] evm: security.SMACK64EXEC
[ 0.717098] evm: security.SMACK64TRANSMUTE
[ 0.721210] evm: security.SMACK64MMAP
[ 0.724905] evm: security.ima
[ 0.727891] evm: security.capability
[ 0.732147] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.742154] pinctrl core: initialized pinctrl subsystem
[ 0.747804] RTC time: 11:05:07, date: 03/17/17
[ 0.752853] NET: Registered protocol family 16
[ 0.767537] cpuidle: using governor ladder
[ 0.783548] cpuidle: using governor menu
[ 0.787520] PCCT header not found.
[ 0.791203] ACPI: bus type PCI registered
[ 0.795238] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.802009] PCI: Using configuration type 1 for base access
[ 0.807633] PCI: Using configuration type 1 for extended access
[ 0.828194] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.834606] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.842509] ACPI: Added _OSI(Module Device)
[ 0.846760] ACPI: Added _OSI(Processor Device)
[ 0.851224] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.855947] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.862301] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.884822] ACPI: Interpreter enabled
[ 0.888644] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.893123] ACPI: Using IOAPIC for interrupt routing
[ 0.898172] HEST: Table parsing has been initialized.
[ 0.903282] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.923325] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.929544] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.938087] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.946363] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.958014] PCI host bridge to bus 0000:00
[ 0.962141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.968949] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.975774] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.982669] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.989559] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.996452] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.003006] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 1.009145] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 1.015335] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 1.021495] pci 0000:00:02.5: System wakeup disabled by ACPI
[ 1.028235] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 1.034341] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.040018] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 1.055595] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 1.067604] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 1.079588] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 1.085374] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.095442] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 1.101316] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
[ 1.108255] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
[ 1.115241] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
[ 1.122200] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
[ 1.129068] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
[ 1.136040] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
[ 1.143011] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.148403] vgaarb: loaded
[ 1.152552] PCI: Using ACPI for IRQ routing
[ 1.157439] NetLabel: Initializing
[ 1.160862] NetLabel: domain hash size = 128
[ 1.165236] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.170316] NetLabel: unlabeled traffic allowed by default
[ 1.176354] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.181388] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.190383] clocksource: Switched to clocksource hpet
[ 1.223376] VFS: Disk quotas dquot_6.6.0
[ 1.227468] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.234736] AppArmor: AppArmor Filesystem Enabled
[ 1.239751] pnp: PnP ACPI init
[ 1.243716] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 1.251055] pnp: PnP ACPI: found 3 devices
[ 1.268940] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.277962] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 1.282955] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 1.289091] pci 0000:00:02.2: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.295938] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 1.300934] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 1.307059] pci 0000:00:02.3: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.313875] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 1.318897] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 1.325016] pci 0000:00:02.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.331835] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 1.336831] pci 0000:00:02.5: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.343873] NET: Registered protocol family 2
[ 1.349187] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.356864] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.363844] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.370530] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.376672] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.383408] NET: Registered protocol family 1
[ 1.389045] Unpacking initramfs...
[ 3.739542] Freeing initrd memory: 31760K (ffff8800341e8000 - ffff8800360ec000)
[ 3.746980] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.753445] software IO TLB [mem 0xdbfae000-0xdffae000] (64MB) mapped at [ffff8800dbfae000-ffff8800dffadfff]
[ 3.763462] perf: AMD NB counters detected
[ 3.767619] perf: AMD L2I counters detected
[ 3.771919] LVT offset 0 assigned for vector 0x400
[ 3.776764] perf: AMD IBS detected (0x000000ff)
[ 3.781748] Scanning for low memory corruption every 60 seconds
[ 3.789103] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.795529] audit: initializing netlink subsys (disabled)
[ 3.801019] audit: type=2000 audit(1489748709.556:1): initialized
[ 3.808731] Initialise system trusted keyring
[ 3.813569] workingset: timestamp_bits=33 max_order=20 bucket_order=0
[ 3.828920] zbud: loaded
[ 3.832485] Key type big_key registered
[ 3.838199] Key type asymmetric registered
[ 3.842367] Asymmetric key parser 'x509' registered
[ 3.847496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.855049] io scheduler noop registered
[ 3.859008] io scheduler deadline registered (default)
[ 3.864317] io scheduler cfq registered
[ 3.870309] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[ 3.877297] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.883993] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[ 3.890980] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.897590] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
[ 3.904578] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.911240] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt
[ 3.918230] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 3.924852] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.930469] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.937390] GHES: Failed to enable APEI firmware first mode.
[ 3.943420] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.970484] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.998719] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 4.014850] PPP generic driver version 2.4.2
[ 4.019380] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.081170] i8042: No controller found
[ 5.084967] tsc: Refined TSC clocksource calibration: 998.127 MHz
[ 5.087086] mousedev: PS/2 mouse device common for all mice
[ 5.087428] rtc_cmos 00:01: RTC can wake from S4
[ 5.087780] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 5.087828] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 5.087895] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.089351] NET: Registered protocol family 10
[ 5.090285] NET: Registered protocol family 17
[ 5.091363] microcode: CPU0: patch_level=0x07030105
[ 5.091383] microcode: CPU1: patch_level=0x07030105
[ 5.091401] microcode: CPU2: patch_level=0x07030105
[ 5.096711] microcode: CPU3: patch_level=0x07030105
[ 5.096851] microcode: Microcode Update Driver: v2.01 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 5.097541] registered taskstats version 1
[ 5.097587] Loading compiled-in X.509 certificates
[ 5.110377] Loaded X.509 cert 'Build time autogenerated kernel key: 5416e2c482d66dd0c34159ae8c9fc4066f19244c'
[ 5.110501] zswap: loaded using pool lzo/zbud
[ 5.124473] Key type encrypted registered
[ 5.124489] AppArmor: AppArmor sha1 policy hashing enabled
[ 5.124499] ima: No TPM chip found, activating TPM-bypass!
[ 5.124554] evm: HMAC attrs: 0x1
[ 5.125622] Magic number: 9:935:74
[ 5.125654] hash matches /home/kernel/COD/linux/drivers/base/power/main.c:1173
[ 5.129672] rtc_cmos 00:01: setting system clock to 2017-03-17 11:05:11 UTC (1489748711)
[ 5.218993] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
[ 5.237810] Freeing unused kernel memory: 1764K (ffffffff81d4e000 - ffffffff81f07000)
[ 5.245882] Write protecting the kernel read-only data: 12288k
[ 5.253822] Freeing unused kernel memory: 1372K (ffff8800016a9000 - ffff880001800000)
[ 5.274885] Freeing unused kernel memory: 1020K (ffff880001b01000 - ffff880001c00000)
Loading, please wait...
starting version 229
[ 5.326041] random: systemd-udevd urandom read with 6 bits of entropy available
[ 5.455457] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.464867] ACPI: Power Button [PWRB]
[ 5.469233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.477557] ACPI: Power Button [PWRF]
[ 5.493751] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 5.557504] pps_core: LinuxPPS API ver. 1 registered
[ 5.562882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 5.583371] PTP clock support registered
[ 5.596841] dca service started, version 1.12.1
[ 5.623874] SCSI subsystem initialized
[ 5.638623] ACPI: bus type USB registered
[ 5.656778] usbcore: registered new interface driver usbfs
[ 5.662875] usbcore: registered new interface driver hub
[ 5.668853] sdhci: Secure Digital Host Controller Interface driver
[ 5.675416] sdhci: Copyright(c) Pierre Ossman
[ 5.677246] usbcore: registered new device driver usb
[ 5.693963] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 5.701702] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 5.721300] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.745593] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.751749] ehci-pci: EHCI PCI platform driver
[ 5.763100] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 5.780590] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 5.780825] pps pps0: new PPS source ptp0
[ 5.780832] igb 0000:01:00.0: added PHC on eth0
[ 5.780836] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.780841] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:6a:cc
[ 5.780847] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 5.780852] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.813076] pps pps1: new PPS source ptp1
[ 5.813084] igb 0000:02:00.0: added PHC on eth1
[ 5.813088] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.813119] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:6a:cd
[ 5.813125] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[ 5.813130] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.847617] pps pps2: new PPS source ptp2
[ 5.847624] igb 0000:03:00.0: added PHC on eth2
[ 5.847655] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.847660] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:6a:ce
[ 5.847666] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[ 5.847671] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.907438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.914985] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.923108] usb usb1: Product: xHCI Host Controller
[ 5.928591] usb usb1: Manufacturer: Linux 4.6.2-040602-generic xhci-hcd
[ 5.935916] usb usb1: SerialNumber: 0000:00:10.0
[ 5.943634] hub 1-0:1.0: USB hub found
[ 5.951103] hub 1-0:1.0: 2 ports detected
[ 5.956425] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.963353] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 5.980978] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.990706] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.998255] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.006114] usb usb2: Product: xHCI Host Controller
[ 6.011478] usb usb2: Manufacturer: Linux 4.6.2-040602-generic xhci-hcd
[ 6.018719] usb usb2: SerialNumber: 0000:00:10.0
[ 6.033613] hub 2-0:1.0: USB hub found
[ 6.038962] hub 2-0:1.0: 2 ports detected
[ 6.044193] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 6.054399] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 6.063179] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 6.068977] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
[ 6.076923] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 6.086462] ehci-pci 0000:00:13.0: debug port 2
[ 6.093252] igb 0000:01:00.0 enp1s0: renamed from eth0
[ 6.095904] ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
[ 6.107178] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 6.116020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.123525] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.131228] usb usb3: Product: EHCI Host Controller
[ 6.136297] usb usb3: Manufacturer: Linux 4.6.2-040602-generic ehci_hcd
[ 6.143107] usb usb3: SerialNumber: 0000:00:13.0
[ 6.148696] hub 3-0:1.0: USB hub found
[ 6.152774] hub 3-0:1.0: 2 ports detected
[ 6.153619] igb 0000:02:00.0 enp2s0: renamed from eth1
[ 6.164845] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 6.173637] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 6.183460] igb 0000:03:00.0 enp3s0: renamed from eth2
[ 6.190406] scsi host0: ahci
[ 6.196981] scsi host1: ahci
[ 6.200788] ata1: SATA max UDMA/133 abar m1024 at 0xfeb25000 port 0xfeb25100 irq 19
[ 6.208817] ata2: SATA max UDMA/133 abar m1024 at 0xfeb25000 port 0xfeb25180 irq 19
[ 6.219100] clocksource: Switched to clocksource tsc
[ 6.474914] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 6.525545] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.611319] usb 3-1: New USB device found, idVendor=0438, idProduct=7900
[ 6.618272] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.627790] hub 3-1:1.0: USB hub found
[ 6.632578] hub 3-1:1.0: 4 ports detected
[ 6.686998] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.700093] ata1.00: ATA-8: KINGSTON SMS200S3120G, 608ABBF0, max UDMA/133
[ 6.707153] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 6.719510] ata1.00: configured for UDMA/133
[ 6.724452] scsi 0:0:0:0: Direct-Access ATA KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
[ 6.786729] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 6.795467] sd 0:0:0:0: [sda] Write Protect is off
[ 6.800688] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.814310] sda: sda1 sda2 < sda5 >
[ 6.819609] sd 0:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.27.1
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
/dev/sda1: recovering journal
/dev/sda1: clean, 161086/7069696 files, 1239085/28260864 blocks
done.
[ 7.096715] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 7.328271] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.347155] systemd[1]: Detected architecture x86-64.
Welcome to Ubuntu 16.04.1 LTS!
[ 7.363358] systemd[1]: Set hostname to <ubuntu>.
[ 7.524924] systemd[1]: Reached target User and Group Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 7.543540] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 7.559219] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 7.579277] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 7.595248] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 7.611198] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 7.631682] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ 7.655165] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 7.671097] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 7.687419] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 7.703266] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.719148] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 7.735200] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.751234] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 7.767290] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 7.787412] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 7.819316] systemd[1]: Starting Nameserver information manager...
Starting Nameserver information manager...
[ 7.837805] systemd[1]: Started Read required files in advance.
[ OK ] Started Read required files in advance.
[ 7.858692] systemd[1]: Starting Set console keymap...
Starting Set console keymap...
[ 7.877943] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 7.897934] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 7.913848] systemd[1]: Starting Uncomplicated firewall...
Starting Uncomplicated firewall...
[ 7.927338] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 7.939855] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 7.983726] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 8.002138] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 8.025922] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 8.042240] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 8.066109] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 8.079252] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 8.095288] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 8.111736] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Started Set console keymap.
[ OK ] Started Uncomplicated firewall.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ OK ] Started Nameserver information manager.
Starting Create Static Device Nodes in /dev...
Starting Apply Kernel Variables...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
[ OK ] Reached target Local File Systems (Pre).
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems.
Starting Tell Plymouth To Write Out Runtime Data...
Starting Set console font and keymap...
Starting LSB: AppArmor initialization...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started LSB: AppArmor initialization.
Starting Raise network interfaces...
[ OK ] Started Set console font and keymap.
[ OK ] Created slice system-getty.slice.
[ OK ] Started ifup for enp2s0.
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device I210 Gigabit Network Connection.
[ OK ] Found device KINGSTON_SMS200S3120G 5.
Activating swap /dev/disk/by-uuid/d...3-00a7-45e6-8ea5-f5b318efb217...
[ OK ] Activated swap /dev/disk/by-uuid/d30b3493-00a7-45e6-8ea5-f5b318efb217.
[ OK ] Reached target Swap.
[ OK ] Reached target System Initialization.
[ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Trigger resolvconf update for networkd DNS.
[ OK ] Reached target Paths.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started Daily apt activities.
[ OK ] Reached target Timers.
[ OK ] Listening on UUID daemon activation socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Permit User Sessions...
Starting Login Service...
[ OK ] Started Regular background program processing daemon.
Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
Starting LSB: daemon to balance interrupts for SMP systems...
Starting Accounts Service...
Starting LSB: Record successful boot for GRUB...
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
[ OK ] Started GPS (Global Positioning System) Daemon.
Starting System Logging Service...
Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
[ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[ OK ] Started LSB: Record successful boot for GRUB.
[ OK ] Started LSB: daemon to balance interrupts for SMP systems.
[ OK ] Started Network Manager.
[ OK ] Started Login Service.
Starting Network Manager Script Dispatcher Service...
Starting Network Manager Wait Online...
Starting Authenticate and Authorize Users to Run Privileged Tasks...
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[ OK ] Started Accounts Service.
[ OK ] Started Raise network interfaces.
Starting Hostname Service...
[ OK ] Reached target Network.
Starting OpenBSD Secure Shell server...
[ OK ] Started Hostname Service.
[ OK ] Started OpenBSD Secure Shell server.
Starting WPA supplicant...
[ OK ] Started WPA supplicant.
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting LSB: Start xrdp and sesman daemons...
Starting LSB: Starts or stops the xinetd daemon....
[ OK ] Started ISC DHCP IPv4 server.
Starting /etc/rc.local Compatibility...
[ OK ] Started /etc/rc.local Compatibility.
Starting Terminate Plymouth Boot Screen...
Starting Hold until boot process finishes up...
[ OK ] Started Terminate Plymouth Boot Screen.
[ OK ] Started Hold until boot process finishes up.
Starting Set console scheme...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started Set console scheme.
[ OK ] Started LSB: Starts or stops the xinetd daemon..
[ OK ] Started LSB: Start xrdp and sesman daemons.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Stop ureadahead data collection 45s after completed startup.
[ OK ] Started Update UTMP about System Runlevel Changes.
Ubuntu 16.04.1 LTS ubuntu ttyS0
ubuntu login: go
Password:
Last login: Fri Mar 17 12:03:44 CET 2017 on ttyS0
Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.6.2-040602-generic x86_64)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
go at ubuntu:~$ lsusb
Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
go at ubuntu:~$
-----Ursprüngliche Nachricht-----
Von: Dan Williams [mailto:dcbw at redhat.com]
Gesendet: Samstag, 18. März 2017 04:47
An: Thomas Lang <thomas.lang at tactilo.eu>; ModemManager (development) <modemmanager-devel at lists.freedesktop.org>
Betreff: Re: MC7455 not listed as usb device any more after reboot
On Fri, 2017-03-17 at 11:57 +0000, Thomas Lang wrote:
> Hi all,
> perhaps you have seen this bug before. I’m using the MC7455 with a
> linux system after normal power cycle (unplugged power) the mc 7455
> can be found with lsusb:
>
>
>
> go at ubuntu:~$ lsusb
>
> Bus 003 Device 003: ID 1199:9071 Sierra Wireless, Inc.
>
> Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
>
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> If I do a reboot, the mc7455 is not listed anymore.
>
> Any ideas what might be the problem?
That's probably an issue with system BIOS or the kernel's USB stack, unfortunately. You'd want to enable debugging in the kernel drivers for your USB HCI and then figure out why the device fails to be enumerated. There may even be logging for that already, check "dmesg"
for lines including "ehci" (USB 2), "ochi" (USB 1), and "xhci" (USB 3) when the device fails to appear; perhaps something will show up for "3- 4", eg:
kernel: usb 3-4: new high-speed USB device number 2 using xhci_hcd
but if that device then fails to enumerate itself, the kernel won't show it in lsusb since it can't get any information from it.
In any case, this sounds like a USB stack issue.
Dan
More information about the ModemManager-devel
mailing list