AW: MC7455 not listed as usb device any more after reboot
Dan Williams
dcbw at redhat.com
Mon Mar 20 21:16:19 UTC 2017
On Mon, 2017-03-20 at 09:45 +0000, Thomas Lang wrote:
> Hi Dan,
> thanks for your comments.
> I have included a trace of the working start and the reboot. I
> noticed that in the reboot case the usb 3-1.3 device is not detected
> anymore. The usb 3-1 is an ehci-pci. Would it help to reset the ehci-
> pci? And if so how would I do this.
If you rmmod anything related to ehci-hcd and then re-mode probe it and
anything else you unloaded, does that make it show up? If so, that
would indicate a bug in the ehci driver and/or your platform support.
Dan
> Thanks a lot for any coment,
> Thomas
>
> Cold Start
> PCEngines apu2
> coreboot build 20160311
> 4080 MB ECC DRAM
>
> SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
> Found mainboard PC Engines PCEngines apu2
> multiboot: eax=0, ebx=0
> boot order:
> 1: /pci at i0cf8/usb at 10/usb-*@1
> 2: /pci at i0cf8/usb at 10/usb-*@2
> 3: /pci at i0cf8/usb at 10/usb-*@3
> 4: /pci at i0cf8/usb at 10/usb-*@4
> 5: /pci at i0cf8/*@14,7
> 6: /pci at i0cf8/*@11/drive at 0/disk at 0
> 7: /pci at i0cf8/*@11/drive at 1/disk at 0
> 8: /rom at genroms/pxe.rom
> 9: pxen0
> 10: scon1
> 11:
> Found 23 PCI devices (max PCI bus is 04)
> Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
> Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
> Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
> Copying PIR from 0xdffdd000 to 0x000f2f00
> Using pmtimer, ioport 0x818
> Scan for VGA option rom
> Running option rom at c000:0003
>
> Google, Inc.
> Serial Graphics Adapter 08/22/15
> SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (wiv at coreboot
> -Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
> Term: 80x24
> IO4 0
> Turning on vga text mode console
> SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
> XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32
> byte contexts
> XHCI extcap 0x1 @ feb22500
> XHCI protocol USB 3.00, 2 ports (offset 1), def 0
> XHCI protocol USB 2.00, 2 ports (offset 3), def 10
> XHCI extcap 0xa @ feb22540
> Found 2 serial ports
> ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
> EHCI init on dev 00:13.0 (regs=0xfeb25420)
> ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
> Searching bootorder for: /pci at i0cf8/*@14,7
> Searching bootorder for: /rom at img/memtest
> Searching bootorder for: /rom at img/setup
> ata0-0: KINGSTON SMS200S3120G ATA-8 Hard-Disk (111 GiBytes)
> Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
> XHCI no devices found
> Initialized USB HUB (0 ports used)
> All threads complete.
> Scan for option roms
> Running option rom at c100:0003
>
>
> iPXE (http://ipxe.org) 00:00.0 C100 PCI2.10 PnP PMMpmm call arg1=1
> pmm call arg1=0
> +DFF49730pmm call arg1=1
> pmm call arg1=0
> +DFE89730 C100
>
>
>
> Searching bootorder for: /rom at genroms/pxe.rom
> PCengines Press F10 key now for boot menu:
> Searching bootorder for: HALT
> drive 0x000f2e90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
> s=234441648
> Space available for UMB: c2000-ef000, f0000-f2e90
> Returned 262144 bytes of ZoneHigh
> e820 map has 7 items:
> 0: 0000000000000000 - 000000000009f800 = 1 RAM
> 1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
> 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> 3: 0000000000100000 - 00000000dffae000 = 1 RAM
> 4: 00000000dffae000 - 00000000e0000000 = 2 RESERVED
> 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
> 6: 0000000100000000 - 000000011f000000 = 1 RAM
> enter handle_19:
> NULL
> Booting from Hard Disk...
> Booting from 0000:7c00
> [ 0.000000] Linux version 4.6.2-040602-generic (kernel at gloin) (gcc
> version 5.3.1 20160528 (Ubuntu 5.3.1-21ubuntu11) ) #201606100516 SMP
> Fri Jun 10 09:18:34 UTC 2016
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-
> generic root= UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro
> console=tty0 console=ttyS0,115200n8
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
> point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE
> registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX
> registers'
> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
> 832 bytes, using 'standard' format.
> [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffadfff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000dffae000-0x00000000dfffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff]
> usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC-
> UC WB WC UC- WT
> [ 0.000000] e820: last_pfn = 0xdffae max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f]
> mapped at [ffff8800000f2f30]
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] RAMDISK: [mem 0x341e8000-0x360ebfff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE )
> [ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02
> AMD COREBOOT 00010001 INTL 20140114)
> [ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040
> [ 0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02
> CORE COREBOOT 0000002A CORE 0000002A)
> [ 0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02
> AMD AGESA 00000002 MSFT 04000000)
> [ 0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01
> AMD AGESA 00000001 AMD 00000001)
> [ 0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-
> 0x000000011effffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
> [ 0.000000] Device empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-
> 0x000000000009efff]
> [ 0.000000] node 0: [mem 0x0000000000100000-
> 0x00000000dffadfff]
> [ 0.000000] node 0: [mem 0x0000000100000000-
> 0x000000011effffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-
> 0x000000011effffff]
> [ 0.000000] ACPI: PM-Timer IO Port: 0x818
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000,
> GSI 0-23
> [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000,
> GSI 24-55
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
> level)
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-
> 0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-
> 0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-
> 0x000effff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-
> 0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdffae000-
> 0xdfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-
> 0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-
> 0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-
> 0xffffffff]
> [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI
> devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4
> nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88011ec00000 s93464
> r8192 d29416 u524288
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
> on. Total pages: 1027960
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-
> 040602-generic root=UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro
> console=tty0 console=ttyS0,115200n8
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Memory: 3994972K/4177200K available (6805K kernel
> code, 1330K rwdata, 3076K rodata, 1764K init, 2420K bss, 182228K
> reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
> Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 64.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to
> nr_cpu_ids=4.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64,
> nr_cpu_ids=4
> [ 0.000000] NR_IRQS:524544 nr_irqs:1000 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 133484873504 ns
> [ 0.000000] tsc: Unable to calibrate against PIT
> [ 0.000000] tsc: using HPET reference calibration
> [ 0.000000] tsc: Detected 998.026 MHz processor
> [ 0.000119] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 1996.05 BogoMIPS (lpj=3992104)
> [ 0.010794] pid_max: default: 32768 minimum: 301
> [ 0.015513] ACPI: Core revision 20160108
> [ 0.041757] ACPI: 4 ACPI AML tables successfully acquired and
> loaded
> [ 0.048200]
> [ 0.049837] Security Framework initialized
> [ 0.053995] Yama: becoming mindful.
> [ 0.057562] AppArmor: AppArmor initialized
> [ 0.063195] Dentry cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 0.075496] Inode-cache hash table entries: 262144 (order: 9,
> 2097152 bytes)
> [ 0.084740] Mount-cache hash table entries: 8192 (order: 4, 65536
> bytes)
> [ 0.091650] Mountpoint-cache hash table entries: 8192 (order: 4,
> 65536 bytes)
> [ 0.100092] CPU: Physical Processor ID: 0
> [ 0.104134] CPU: Processor Core ID: 0
> [ 0.107846] mce: CPU supports 6 MCE banks
> [ 0.111906] LVT offset 1 assigned for vector 0xf9
> [ 0.116651] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
> [ 0.122171] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128,
> 1GB 0
> [ 0.129756] Freeing SMP alternatives memory: 24K (ffffffff81f07000
> - ffffffff81f0d000)
> [ 0.144109] ftrace: allocating 27464 entries in 108 pages
> [ 0.193835] smpboot: Max logical packages: 1
> [ 0.198197] smpboot: APIC(0) Converting physical 0 to logical
> package 0
> [ 0.205421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> [ 0.355533] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model:
> 0x30, stepping: 0x1)
> [ 0.363607] Performance Events: AMD PMU driver.
> [ 0.368197] ... version: 0
> [ 0.372252] ... bit width: 48
> [ 0.376367] ... generic registers: 4
> [ 0.380398] ... value mask: 0000ffffffffffff
> [ 0.385750] ... max period: 00007fffffffffff
> [ 0.391108] ... fixed-purpose events: 0
> [ 0.395148] ... event mask: 000000000000000f
> [ 0.403046] NMI watchdog: enabled on all CPUs, permanently
> consumes one hw-PMU counter.
> [ 0.411593] x86: Booting SMP configuration:
> [ 0.415800] .... node #0, CPUs: #1 #2 #3
> [ 0.661952] x86: Booted up 1 node, 4 CPUs
> [ 0.666231] smpboot: Total of 4 processors activated (7984.05
> BogoMIPS)
> [ 0.676214] devtmpfs: initialized
> [ 0.679931] x86/mm: Memory block size: 128MB
> [ 0.702240] evm: security.selinux
> [ 0.705580] evm: security.SMACK64
> [ 0.708914] evm: security.SMACK64EXEC
> [ 0.712598] evm: security.SMACK64TRANSMUTE
> [ 0.716715] evm: security.SMACK64MMAP
> [ 0.720398] evm: security.ima
> [ 0.723383] evm: security.capability
> [ 0.727573] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.737543] pinctrl core: initialized pinctrl subsystem
> [ 0.743172] RTC time: 10:59:33, date: 03/17/17
> [ 0.748135] NET: Registered protocol family 16
> [ 0.763576] cpuidle: using governor ladder
> [ 0.773701] cpuidle: using governor menu
> [ 0.777662] PCCT header not found.
> [ 0.781375] ACPI: bus type PCI registered
> [ 0.785409] acpiphp: ACPI Hot Plug PCI Controller Driver version:
> 0.5
> [ 0.792189] PCI: Using configuration type 1 for base access
> [ 0.797792] PCI: Using configuration type 1 for extended access
> [ 0.814494] HugeTLB registered 1 GB page size, pre-allocated 0
> pages
> [ 0.820884] HugeTLB registered 2 MB page size, pre-allocated 0
> pages
> [ 0.828753] ACPI: Added _OSI(Module Device)
> [ 0.832962] ACPI: Added _OSI(Processor Device)
> [ 0.837422] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.842145] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.848542] ACPI: Executed 1 blocks of module-level executable AML
> code
> [ 0.871435] ACPI: Interpreter enabled
> [ 0.875215] ACPI: (supports S0 S1 S2 S3 S4 S5)
> [ 0.879703] ACPI: Using IOAPIC for interrupt routing
> [ 0.884751] HEST: Table parsing has been initialized.
> [ 0.889863] PCI: Using host bridge windows from ACPI; if
> necessary, use "pci=nocrs" and report a bug
> [ 0.909859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.916091] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig
> ASPM ClockPM Segments MSI]
> [ 0.924694] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug
> PME AER PCIeCapability]
> [ 0.932940] acpi PNP0A08:00: host bridge window expanded to
> [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
> [ 0.944494] PCI host bridge to bus 0000:00
> [ 0.948617] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
> window]
> [ 0.955454] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
> window]
> [ 0.962270] pci_bus 0000:00: root bus resource [mem 0x000a0000-
> 0x000bffff]
> [ 0.969179] pci_bus 0000:00: root bus resource [mem 0x000c0000-
> 0x000dffff]
> [ 0.976071] pci_bus 0000:00: root bus resource [mem 0xe0000000-
> 0xffffffff]
> [ 0.982978] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.989576] pci 0000:00:02.2: System wakeup disabled by ACPI
> [ 0.995753] pci 0000:00:02.3: System wakeup disabled by ACPI
> [ 1.001978] pci 0000:00:02.4: System wakeup disabled by ACPI
> [ 1.008173] pci 0000:00:02.5: System wakeup disabled by ACPI
> [ 1.014852] pci 0000:00:10.0: System wakeup disabled by ACPI
> [ 1.020883] pci 0000:00:11.0: set SATA to AHCI mode
> [ 1.026494] pci 0000:00:13.0: System wakeup disabled by ACPI
> [ 1.043635] pci 0000:00:02.2: PCI bridge to [bus 01]
> [ 1.055606] pci 0000:00:02.3: PCI bridge to [bus 02]
> [ 1.067612] pci 0000:00:02.4: PCI bridge to [bus 03]
> [ 1.073246] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe
> device. You can enable it with 'pcie_aspm=force'
> [ 1.083283] pci 0000:00:02.5: PCI bridge to [bus 04]
> [ 1.089202] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12
> 15)
> [ 1.096131] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12
> 15)
> [ 1.103066] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12
> 15)
> [ 1.109921] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12
> 15)
> [ 1.116887] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12
> 15)
> [ 1.123803] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12
> 15)
> [ 1.130771] ACPI: Enabled 4 GPEs in block 00 to 1F
> [ 1.136139] vgaarb: loaded
> [ 1.140407] PCI: Using ACPI for IRQ routing
> [ 1.145320] NetLabel: Initializing
> [ 1.148761] NetLabel: domain hash size = 128
> [ 1.153165] NetLabel: protocols = UNLABELED CIPSOv4
> [ 1.158194] NetLabel: unlabeled traffic allowed by default
> [ 1.164161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 1.169199] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
> [ 1.178152] clocksource: Switched to clocksource hpet
> [ 1.210815] VFS: Disk quotas dquot_6.6.0
> [ 1.214845] VFS: Dquot-cache hash table entries: 512 (order 0,
> 4096 bytes)
> [ 1.222217] AppArmor: AppArmor Filesystem Enabled
> [ 1.227248] pnp: PnP ACPI init
> [ 1.230978] system 00:00: [mem 0xfec10002-0xfec11001] has been
> reserved
> [ 1.238450] pnp: PnP ACPI: found 3 devices
> [ 1.256658] clocksource: acpi_pm: mask: 0xffffff max_cycles:
> 0xffffff, max_idle_ns: 2085701024 ns
> [ 1.265632] pci 0000:00:02.2: PCI bridge to [bus 01]
> [ 1.270630] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
> [ 1.276750] pci 0000:00:02.2: bridge window [mem 0xfe500000-
> 0xfe5fffff]
> [ 1.283566] pci 0000:00:02.3: PCI bridge to [bus 02]
> [ 1.288557] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
> [ 1.294682] pci 0000:00:02.3: bridge window [mem 0xfe600000-
> 0xfe6fffff]
> [ 1.301497] pci 0000:00:02.4: PCI bridge to [bus 03]
> [ 1.306496] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
> [ 1.312658] pci 0000:00:02.4: bridge window [mem 0xfe700000-
> 0xfe7fffff]
> [ 1.319474] pci 0000:00:02.5: PCI bridge to [bus 04]
> [ 1.324471] pci 0000:00:02.5: bridge window [mem 0xfe800000-
> 0xfe8fffff]
> [ 1.331537] NET: Registered protocol family 2
> [ 1.336633] TCP established hash table entries: 32768 (order: 6,
> 262144 bytes)
> [ 1.344293] TCP bind hash table entries: 32768 (order: 7, 524288
> bytes)
> [ 1.351334] TCP: Hash tables configured (established 32768 bind
> 32768)
> [ 1.358004] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [ 1.364148] UDP-Lite hash table entries: 2048 (order: 4, 65536
> bytes)
> [ 1.370895] NET: Registered protocol family 1
> [ 1.376569] Unpacking initramfs...
> [ 3.691122] Freeing initrd memory: 31760K (ffff8800341e8000 -
> ffff8800360ec000)
> [ 3.698516] PCI-DMA: Using software bounce buffering for IO
> (SWIOTLB)
> [ 3.704992] software IO TLB [mem 0xdbfae000-0xdffae000] (64MB)
> mapped at [ffff8800dbfae000-ffff8800dffadfff]
> [ 3.715093] perf: AMD NB counters detected
> [ 3.719239] perf: AMD L2I counters detected
> [ 3.723558] LVT offset 0 assigned for vector 0x400
> [ 3.728483] perf: AMD IBS detected (0x000000ff)
> [ 3.733466] Scanning for low memory corruption every 60 seconds
> [ 3.740949] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 3.747287] audit: initializing netlink subsys (disabled)
> [ 3.752763] audit: type=2000 audit(1489748375.520:1): initialized
> [ 3.760489] Initialise system trusted keyring
> [ 3.765273] workingset: timestamp_bits=33 max_order=20
> bucket_order=0
> [ 3.780582] zbud: loaded
> [ 3.784087] Key type big_key registered
> [ 3.789840] Key type asymmetric registered
> [ 3.794005] Asymmetric key parser 'x509' registered
> [ 3.799160] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 247)
> [ 3.806735] io scheduler noop registered
> [ 3.810715] io scheduler deadline registered (default)
> [ 3.816024] io scheduler cfq registered
> [ 3.822308] pcieport 0000:00:02.2: Signaling PME through PCIe PME
> interrupt
> [ 3.829324] pci 0000:01:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.835999] pcieport 0000:00:02.3: Signaling PME through PCIe PME
> interrupt
> [ 3.842981] pci 0000:02:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.849598] pcieport 0000:00:02.4: Signaling PME through PCIe PME
> interrupt
> [ 3.856582] pci 0000:03:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.863195] pcieport 0000:00:02.5: Signaling PME through PCIe PME
> interrupt
> [ 3.870188] pci 0000:04:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.876798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 3.882446] pciehp: PCI Express Hot Plug Controller Driver
> version: 0.4
> [ 3.889377] GHES: Failed to enable APEI firmware first mode.
> [ 3.895316] Serial: 8250/16550 driver, 32 ports, IRQ sharing
> enabled
> [ 3.922629] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
> 115200) is a 16550A
> [ 3.950774] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
> 115200) is a 16550A
> [ 3.967506] PPP generic driver version 2.4.2
> [ 3.972067] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [ 4.730606] tsc: Refined TSC clocksource calibration: 998.128 MHz
> [ 4.736739] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x1cc65d64e77, max_idle_ns: 881590512558 ns
> [ 5.034743] i8042: No controller found
> [ 5.038873] mousedev: PS/2 mouse device common for all mice
> [ 5.044772] rtc_cmos 00:01: RTC can wake from S4
> [ 5.049777] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 5.055987] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram,
> hpet irqs
> [ 5.063152] ledtrig-cpu: registered to indicate activity on CPUs
> [ 5.070610] NET: Registered protocol family 10
> [ 5.075957] NET: Registered protocol family 17
> [ 5.081540] microcode: CPU0: patch_level=0x07030105
> [ 5.086482] microcode: CPU1: patch_level=0x07030105
> [ 5.091389] microcode: CPU2: patch_level=0x07030105
> [ 5.096300] microcode: CPU3: patch_level=0x07030105
> [ 5.101348] microcode: Microcode Update Driver: v2.01 <tigran at aiva
> zian.fsnet.co.uk>, Peter Oruba
> [ 5.110893] registered taskstats version 1
> [ 5.115123] Loading compiled-in X.509 certificates
> [ 5.132063] Loaded X.509 cert 'Build time autogenerated kernel
> key: 5416e2c482d66dd0c34159ae8c9fc4066f19244c'
> [ 5.142196] zswap: loaded using pool lzo/zbud
> [ 5.159953] Key type encrypted registered
> [ 5.164037] AppArmor: AppArmor sha1 policy hashing enabled
> [ 5.169578] ima: No TPM chip found, activating TPM-bypass!
> [ 5.175168] evm: HMAC attrs: 0x1
> [ 5.179501] Magic number: 9:759:982
> [ 5.183644] rtc_cmos 00:01: setting system clock to 2017-03-17
> 10:59:38 UTC (1489748378)
> [ 5.200734] Freeing unused kernel memory: 1764K (ffffffff81d4e000
> - ffffffff81f07000)
> [ 5.208891] Write protecting the kernel read-only data: 12288k
> [ 5.216908] Freeing unused kernel memory: 1372K (ffff8800016a9000
> - ffff880001800000)
> [ 5.237754] Freeing unused kernel memory: 1020K (ffff880001b01000
> - ffff880001c00000)
> Loading, please wait...
> starting version 229
> [ 5.290125] random: systemd-udevd urandom read with 6 bits of
> entropy available
> [ 5.419935] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 5.429471] FUJITSU Extended Socket Network Device Driver -
> version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
> [ 5.430392] ACPI: Power Button [PWRB]
> [ 5.430878] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 5.431055] ACPI: Power Button [PWRF]
> [ 5.543925] pps_core: LinuxPPS API ver. 1 registered
> [ 5.549405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti at linux.it>
> [ 5.565214] SCSI subsystem initialized
> [ 5.573216] PTP clock support registered
> [ 5.587395] dca service started, version 1.12.1
> [ 5.601719] sdhci: Secure Digital Host Controller Interface driver
> [ 5.608578] sdhci: Copyright(c) Pierre Ossman
> [ 5.627226] ACPI: bus type USB registered
> [ 5.639685] usbcore: registered new interface driver usbfs
> [ 5.646758] sdhci-pci 0000:00:14.7: SDHCI controller found
> [1022:7813] (rev 1)
> [ 5.655279] usbcore: registered new interface driver hub
> [ 5.657476] igb: Intel(R) Gigabit Ethernet Network Driver -
> version 5.3.0-k
> [ 5.657478] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 5.671214] mmc0: SDHCI controller on PCI [0000:00:14.7] using
> ADMA 64-bit
> [ 5.688548] pps pps0: new PPS source ptp0
> [ 5.697450] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6
> Gbps 0x3 impl SATA mode
> [ 5.702658] igb 0000:01:00.0: added PHC on eth0
> [ 5.702663] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 5.702669] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1)
> 00:0d:b9:41:6a:cc
> [ 5.702675] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
> [ 5.702680] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx
> queue(s), 4 tx queue(s)
> [ 5.734491] pps pps1: new PPS source ptp1
> [ 5.734498] igb 0000:02:00.0: added PHC on eth1
> [ 5.734502] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 5.734507] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1)
> 00:0d:b9:41:6a:cd
> [ 5.734512] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
> [ 5.734517] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx
> queue(s), 4 tx queue(s)
> [ 5.778863] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led
> clo pmp fbs pio slum part
> [ 5.788003] clocksource: Switched to clocksource tsc
> [ 5.788612] usbcore: registered new device driver usb
> [ 5.810895] scsi host0: ahci
> [ 5.816595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 5.824411] scsi host1: ahci
> [ 5.828192] pps pps2: new PPS source ptp2
> [ 5.828198] ata1: SATA max UDMA/133 abar m1024 at 0xfeb25000 port
> 0xfeb25100 irq 19
> [ 5.828223] ata2: SATA max UDMA/133 abar m1024 at 0xfeb25000 port
> 0xfeb25180 irq 19
> [ 5.853452] ehci-pci: EHCI PCI platform driver
> [ 5.857803] igb 0000:03:00.0: added PHC on eth2
> [ 5.857835] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 5.857841] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1)
> 00:0d:b9:41:6a:ce
> [ 5.857847] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
> [ 5.857854] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx
> queue(s), 4 tx queue(s)
> [ 5.894023] xhci_hcd 0000:00:10.0: xHCI Host Controller
> [ 5.899949] xhci_hcd 0000:00:10.0: new USB bus registered,
> assigned bus number 1
> [ 5.925312] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci
> version 0x100 quirks 0x00000410
> [ 5.935204] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 5.942668] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 6.454762] usb 3-1: new high-speed USB device number 2 using
> ehci-pci
> Begin: Loading essential drivers ... done.
> Begin: Running /scripts/init-premount ... done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-
> top ... done.
> Begin: Running /scripts/local-premount ... done.
> [ 6.591306] usb 3-1: New USB device found, idVendor=0438,
> idProduct=7900
> [ 6.598409] usb 3-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 6.608489] hub 3-1:1.0: USB hub found
> [ 6.613299] hub 3-1:1.0: 4 ports detected
> Begin: Will now check root file system ... fsck from util-linux
> 2.27.1
> [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
> /dev/sda1: recovering journal
> /dev/sda1: clean, 161082/7069696 files, 1238842/28260864 blocks
> done.
> [ 6.709112] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: (null)
> done.
> Begin: Running /scripts/local-bottom ... done.
> Begin: Running /scripts/init-bottom ... done.
> [ 6.890809] usb 3-1.3: new high-speed USB device number 3 using
> ehci-pci
> [ 6.936169] systemd[1]: systemd 229 running in system mode. (+PAM
> +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
> +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
> [ 6.954952] systemd[1]: Detected architecture x86-64.
>
> Welcome to Ubuntu 16.04.1 LTS!
>
> [ 6.971196] systemd[1]: Set hostname to <ubuntu>.
> [ 6.998808] usb 3-1.3: config 1 has an invalid interface number: 8
> but max is 4
> [ 7.006319] usb 3-1.3: config 1 has an invalid interface number:
> 10 but max is 4
> [ 7.013758] usb 3-1.3: config 1 has no interface number 1
> [ 7.019187] usb 3-1.3: config 1 has no interface number 4
> [ 7.027253] usb 3-1.3: New USB device found, idVendor=1199,
> idProduct=9071
> [ 7.034250] usb 3-1.3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 7.041633] usb 3-1.3: Product: Sierra Wireless MC7455 Qualcomm®
> Snapdragon™ X7 LTE-A
> [ 7.049808] usb 3-1.3: Manufacturer: Sierra Wireless, Incorporated
> [ 7.056027] usb 3-1.3: SerialNumber: LQ61620344021006
> [ 7.156329] systemd[1]: Created slice User and Session Slice.
> [ OK ] Created slice User and Session Slice.
> [ 7.175152] systemd[1]: Listening on Journal Socket.
> [ OK ] Listening on Journal Socket.
> [ 7.191616] systemd[1]: Set up automount Arbitrary Executable File
> Formats File System Automount Point.
> [ OK ] Set up automount Arbitrary Executab...ats File System
> Automount Point.
> [ 7.214966] systemd[1]: Listening on Syslog Socket.
> [ OK ] Listening on Syslog Socket.
> [ 7.230992] systemd[1]: Listening on fsck to fsckd communication
> Socket.
> [ OK ] Listening on fsck to fsckd communication Socket.
> [ 7.251000] systemd[1]: Listening on /dev/initctl Compatibility
> Named Pipe.
> [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
> [ 7.270991] systemd[1]: Listening on udev Kernel Socket.
> [ OK ] Listening on udev Kernel Socket.
> [ 7.286922] systemd[1]: Reached target User and Group Name
> Lookups.
> [ OK ] Reached target User and Group Name Lookups.
> [ 7.306900] systemd[1]: Reached target Remote File Systems (Pre).
> [ OK ] Reached target Remote File Systems (Pre).
> [ 7.322923] systemd[1]: Reached target Remote File Systems.
> [ OK ] Reached target Remote File Systems.
> [ 7.339040] systemd[1]: Started Forward Password Requests to Wall
> Directory Watch.
> [ OK ] Started Forward Password Requests to Wall Directory Watch.
> [ 7.358998] systemd[1]: Listening on udev Control Socket.
> [ OK ] Listening on udev Control Socket.
> [ 7.374988] systemd[1]: Listening on Journal Socket (/dev/log).
> [ OK ] Listening on Journal Socket (/dev/log).
> [ 7.391148] systemd[1]: Listening on Journal Audit Socket.
> [ OK ] Listening on Journal Audit Socket.
> [ 7.407192] systemd[1]: Created slice System Slice.
> [ OK ] Created slice System Slice.
> [ 7.435198] systemd[1]: Starting Set console keymap...
> Starting Set console keymap...
> [ 7.453983] systemd[1]: Starting Create list of required static
> device nodes for the current kernel...
> Starting Create list of required st... nodes for the current
> kernel...
> [ 7.481658] systemd[1]: Starting Nameserver information manager...
> Starting Nameserver information manager...
> [ 7.501634] systemd[1]: Mounting Debug File System...
> Mounting Debug File System...
> [ 7.517569] systemd[1]: Mounting Huge Pages File System...
> Mounting Huge Pages File System...
> [ 7.533684] systemd[1]: Mounting POSIX Message Queue File
> System...
> Mounting POSIX Message Queue File System...
> [ 7.554556] systemd[1]: Starting Load Kernel Modules...
> Starting Load Kernel Modules...
> [ 7.571627] systemd[1]: Created slice system-
> serial\x2dgetty.slice.
> [ OK ] Created slice system-serial\x2dgetty.slice.
> [ 7.590992] systemd[1]: Reached target Slices.
> [ OK ] Reached target Slices.
> [ 7.623140] systemd[1]: Started Read required files in advance.
> [ OK ] Started Read required files in advance.
> [ 7.643325] systemd[1]: Starting Journal Service...
> Starting Journal Service...
> [ 7.661390] systemd[1]: Starting Uncomplicated firewall...
> Starting Uncomplicated firewall...
> [ 7.675145] systemd[1]: Reached target Encrypted Volumes.
> [ OK ] Reached target Encrypted Volumes.
> [ 7.699912] systemd[1]: Mounted Debug File System.
> [ OK ] Mounted Debug File System.
> [ 7.715135] systemd[1]: Mounted POSIX Message Queue File System.
> [ OK ] Mounted POSIX Message Queue File System.
> [ 7.731075] systemd[1]: Mounted Huge Pages File System.
> [ OK ] Mounted Huge Pages File System.
> [ 7.747948] systemd[1]: Started Set console keymap.
> [ OK ] Started Set console keymap.
> [ 7.763910] systemd[1]: Started Create list of required static
> device nodes for the current kernel.
> [ OK ] Started Create list of required sta...ce nodes for the
> current kernel.
> [ 7.805763] systemd[1]: Started Load Kernel Modules.
> [ OK ] Started Load Kernel Modules.
> [ 7.823686] systemd[1]: ureadahead.service: Main process exited,
> code=exited, status=5/NOTINSTALLED
> [ 7.834192] systemd[1]: ureadahead.service: Unit entered failed
> state.
> [ 7.840805] systemd[1]: ureadahead.service: Failed with result
> 'exit-code'.
> [ 7.848462] systemd[1]: Started Uncomplicated firewall.
> [ OK ] Started Uncomplicated firewall.
> [ 7.879500] systemd[1]: Started Nameserver information manager.
> [ OK ] Started Nameserver information manager.
> [ 7.900381] systemd[1]: Started Journal Service.
> [ OK ] Started Journal Service.
> Starting Apply Kernel Variables...
> Starting Create Static Device Nodes in /dev...
> [ OK ] Started Apply Kernel Variables.
> [ OK ] Started Create Static Device Nodes in /dev.
> Starting udev Kernel Device Manager...
> [ OK ] Started udev Kernel Device Manager.
> Starting Remount Root and Kernel File Systems...
> [ OK ] Started Remount Root and Kernel File Systems.
> [ OK ] Reached target Local File Systems (Pre).
> Starting Flush Journal to Persistent Storage...
> [ OK ] Reached target Local File Systems.
> Starting Set console font and keymap...
> Starting LSB: AppArmor initialization...
> Starting Tell Plymouth To Write Out Runtime Data...
> Starting Load/Save Random Seed...
> Starting udev Coldplug all Devices...
> [ OK ] Started Tell Plymouth To Write Out Runtime Data.
> [ OK ] Started Load/Save Random Seed.
> [ OK ] Started Flush Journal to Persistent Storage.
> Starting Create Volatile Files and Directories...
> [ OK ] Started udev Coldplug all Devices.
> [ OK ] Started Dispatch Password Requests to Console Directory
> Watch.
> [ OK ] Started Create Volatile Files and Directories.
> Starting Update UTMP about System Boot/Shutdown...
> Starting Network Time Synchronization...
> [ OK ] Started Update UTMP about System Boot/Shutdown.
> [ OK ] Started Network Time Synchronization.
> [ OK ] Reached target System Time Synchronized.
> [ OK ] Started Set console font and keymap.
> [ OK ] Started LSB: AppArmor initialization.
> Starting Raise network interfaces...
> [ OK ] Created slice system-getty.slice.
> [ OK ] Started ifup for enp2s0.
> [ OK ] Found device I210 Gigabit Network Connection.
> [ OK ] Found device /dev/ttyS0.
> [ OK ] Found device KINGSTON_SMS200S3120G 5.
> Activating swap /dev/disk/by-uuid/d...3-00a7-45e6-8ea5-
> f5b318efb217...
> [ OK ] Activated swap /dev/disk/by-uuid/d30b3493-00a7-45e6-8ea5-
> f5b318efb217.
> [ OK ] Reached target Swap.
> [ OK ] Reached target System Initialization.
> [ OK ] Listening on D-Bus System Message Bus Socket.
> [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
> [ OK ] Listening on UUID daemon activation socket.
> [ OK ] Reached target Sockets.
> [ OK ] Started Daily apt activities.
> [ OK ] Started Daily Cleanup of Temporary Directories.
> [ OK ] Reached target Timers.
> [ OK ] Started Trigger resolvconf update for networkd DNS.
> [ OK ] Reached target Paths.
> [ OK ] Reached target Basic System.
> Starting System Logging Service...
> Starting LSB: daemon to balance interrupts for SMP
> systems...
> [ OK ] Started D-Bus System Message Bus.
> Starting Network Manager...
> Starting Login Service...
> Starting Restore /etc/resolv.conf i...re the ppp link was
> shut down...
> Starting LSB: Record successful boot for GRUB...
> [ OK ] Started GPS (Global Positioning System) Daemon.
> Starting Permit User Sessions...
> Starting Accounts Service...
> Starting LSB: Set the CPU Frequency Scaling governor to
> "ondemand"...
> [ OK ] Started Regular background program processing daemon.
> [ OK ] Started System Logging Service.
> [ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was
> shut down.
> [ OK ] Started Permit User Sessions.
> [ OK ] Started LSB: Record successful boot for GRUB.
> [ OK ] Started LSB: Set the CPU Frequency Scaling governor to
> "ondemand".
> [ OK ] Started LSB: daemon to balance interrupts for SMP systems.
> [ OK ] Started Network Manager.
> [ OK ] Started Login Service.
> Starting Network Manager Script Dispatcher Service...
> Starting Network Manager Wait Online...
> Starting Authenticate and Authorize Users to Run Privileged
> Tasks...
> [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill
> Watch.
> [ OK ] Started Network Manager Script Dispatcher Service.
> Starting Load/Save RF Kill Switch Status...
> [ OK ] Started Authenticate and Authorize Users to Run Privileged
> Tasks.
> [ OK ] Started Accounts Service.
> Starting Hostname Service...
> [ OK ] Started Load/Save RF Kill Switch Status.
> [ OK ] Started Hostname Service.
> Starting WPA supplicant...
> [ OK ] Started WPA supplicant.
> [ OK ] Started Raise network interfaces.
> [ OK ] Reached target Network.
> Starting OpenBSD Secure Shell server...
> [ OK ] Started OpenBSD Secure Shell server.
> [ OK ] Started Network Manager Wait Online.
> [ OK ] Reached target Network is Online.
> Starting /etc/rc.local Compatibility...
> Starting LSB: Starts or stops the xinetd daemon....
> [ OK ] Started ISC DHCP IPv4 server.
> Starting LSB: Start xrdp and sesman daemons...
> [ OK ] Started /etc/rc.local Compatibility.
> Starting Terminate Plymouth Boot Screen...
> Starting Hold until boot process finishes up...
> [ OK ] Started Terminate Plymouth Boot Screen.
> [ OK ] Started Hold until boot process finishes up.
> [ OK ] Started Getty on tty1.
> Starting Set console scheme...
> [ OK ] Started Serial Getty on ttyS0.
> [ OK ] Reached target Login Prompts.
> [ OK ] Started LSB: Starts or stops the xinetd daemon..
> [ OK ] Started Set console scheme.
> [ OK ] Started LSB: Start xrdp and sesman daemons.
> [ OK ] Reached target Multi-User System.
> [ OK ] Reached target Graphical Interface.
> Starting Update UTMP about System Runlevel Changes...
> [ OK ] Started Stop ureadahead data collection 45s after completed
> startup.
> [ OK ] Started Update UTMP about System Runlevel Changes.
>
> Ubuntu 16.04.1 LTS ubuntu ttyS0
>
> ubuntu login: go
> Password:
> Last login: Fri Mar 17 11:51:00 CET 2017 on ttyS0
> Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.6.2-040602-generic x86_64)
>
> * Documentation: https://help.ubuntu.com
> * Management: https://landscape.canonical.com
> * Support: https://ubuntu.com/advantage
> go at ubuntu:~$ lsusb
> Bus 003 Device 003: ID 1199:9071 Sierra Wireless, Inc.
> Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> go at ubuntu:~$
>
>
> Warm reboot -F
> PCEngines apu2
> coreboot build 20160311
> 4080 MB ECC DRAM
>
> SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
> Found mainboard PC Engines PCEngines apu2
> multiboot: eax=0, ebx=0
> boot order:
> 1: /pci at i0cf8/usb at 10/usb-*@1
> 2: /pci at i0cf8/usb at 10/usb-*@2
> 3: /pci at i0cf8/usb at 10/usb-*@3
> 4: /pci at i0cf8/usb at 10/usb-*@4
> 5: /pci at i0cf8/*@14,7
> 6: /pci at i0cf8/*@11/drive at 0/disk at 0
> 7: /pci at i0cf8/*@11/drive at 1/disk at 0
> 8: /rom at genroms/pxe.rom
> 9: pxen0
> 10: scon1
> 11:
> Found 23 PCI devices (max PCI bus is 04)
> Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
> Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
> Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
> Copying PIR from 0xdffdd000 to 0x000f2f00
> Using pmtimer, ioport 0x818
> Scan for VGA option rom
> Running option rom at c000:0003
>
> Google, Inc.
> Serial Graphics Adapter 08/22/15
> SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (wiv at coreboot
> -Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
> Term: 80x24
> IO4 0
> Turning on vga text mode console
> SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
> XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32
> byte contexts
> XHCI extcap 0x1 @ feb22500
> XHCI protocol USB 3.00, 2 ports (offset 1), def 0
> XHCI protocol USB 2.00, 2 ports (offset 3), def 10
> XHCI extcap 0xa @ feb22540
> Found 2 serial ports
> ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
> EHCI init on dev 00:13.0 (regs=0xfeb25420)
> ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
> Searching bootorder for: /pci at i0cf8/*@14,7
> Searching bootorder for: /rom at img/memtest
> Searching bootorder for: /rom at img/setup
> ata0-0: KINGSTON SMS200S3120G ATA-8 Hard-Disk (111 GiBytes)
> Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
> XHCI no devices found
> Initialized USB HUB (0 ports used)
> All threads complete.
> Scan for option roms
> Running option rom at c100:0003
>
>
> iPXE (http://ipxe.org) 00:00.0 C100 PCI2.10 PnP PMMpmm call arg1=1
> pmm call arg1=0
> +DFF49730pmm call arg1=1
> pmm call arg1=0
> +DFE89730 C100
>
>
>
> Searching bootorder for: /rom at genroms/pxe.rom
> PCengines Press F10 key now for boot menu:
> Searching bootorder for: HALT
> drive 0x000f2e90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
> s=234441648
> Space available for UMB: c2000-ef000, f0000-f2e90
> Returned 262144 bytes of ZoneHigh
> e820 map has 7 items:
> 0: 0000000000000000 - 000000000009f800 = 1 RAM
> 1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
> 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> 3: 0000000000100000 - 00000000dffae000 = 1 RAM
> 4: 00000000dffae000 - 00000000e0000000 = 2 RESERVED
> 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
> 6: 0000000100000000 - 000000011f000000 = 1 RAM
> enter handle_19:
> NULL
> Booting from Hard Disk...
> Booting from 0000:7c00
> [ 0.000000] Linux version 4.6.2-040602-generic (kernel at gloin) (gcc
> version 5.3.1 20160528 (Ubuntu 5.3.1-21ubuntu11) ) #201606100516 SMP
> Fri Jun 10 09:18:34 UTC 2016
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-
> generic root=UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro
> console=tty0 console=ttyS0,115200n8
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
> point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE
> registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX
> registers'
> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
> 832 bytes, using 'standard' format.
> [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffadfff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000dffae000-0x00000000dfffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff]
> usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC-
> UC WB WC UC- WT
> [ 0.000000] e820: last_pfn = 0xdffae max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f]
> mapped at [ffff8800000f2f30]
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] RAMDISK: [mem 0x341e8000-0x360ebfff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE )
> [ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02
> AMD COREBOOT 00010001 INTL 20140114)
> [ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040
> [ 0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02
> CORE COREBOOT 0000002A CORE 0000002A)
> [ 0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02
> AMD AGESA 00000002 MSFT 04000000)
> [ 0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01
> AMD AGESA 00000001 AMD 00000001)
> [ 0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01
> CORE COREBOOT 00000000 CORE 00000000)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-
> 0x000000011effffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
> [ 0.000000] Device empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-
> 0x000000000009efff]
> [ 0.000000] node 0: [mem 0x0000000000100000-
> 0x00000000dffadfff]
> [ 0.000000] node 0: [mem 0x0000000100000000-
> 0x000000011effffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-
> 0x000000011effffff]
> [ 0.000000] ACPI: PM-Timer IO Port: 0x818
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000,
> GSI 0-23
> [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000,
> GSI 24-55
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
> dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
> level)
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-
> 0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-
> 0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-
> 0x000effff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-
> 0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdffae000-
> 0xdfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-
> 0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-
> 0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-
> 0xffffffff]
> [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI
> devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4
> nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88011ec00000 s93464
> r8192 d29416 u524288
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping
> on. Total pages: 1027960
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-
> 040602-generic root=UUID=474ac08c-0d55-4ac0-ad7e-b922152698e5 ro
> console=tty0 console=ttyS0,115200n8
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Memory: 3994972K/4177200K available (6805K kernel
> code, 1330K rwdata, 3076K rodata, 1764K init, 2420K bss, 182228K
> reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
> Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 64.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to
> nr_cpu_ids=4.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64,
> nr_cpu_ids=4
> [ 0.000000] NR_IRQS:524544 nr_irqs:1000 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 133484873504 ns
> [ 0.000000] tsc: Unable to calibrate against PIT
> [ 0.000000] tsc: using HPET reference calibration
> [ 0.000000] tsc: Detected 998.034 MHz processor
> [ 0.000149] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 1996.06 BogoMIPS (lpj=3992136)
> [ 0.010850] pid_max: default: 32768 minimum: 301
> [ 0.015549] ACPI: Core revision 20160108
> [ 0.041995] ACPI: 4 ACPI AML tables successfully acquired and
> loaded
> [ 0.048462]
> [ 0.050083] Security Framework initialized
> [ 0.054211] Yama: becoming mindful.
> [ 0.057774] AppArmor: AppArmor initialized
> [ 0.063571] Dentry cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 0.075556] Inode-cache hash table entries: 262144 (order: 9,
> 2097152 bytes)
> [ 0.084527] Mount-cache hash table entries: 8192 (order: 4, 65536
> bytes)
> [ 0.091339] Mountpoint-cache hash table entries: 8192 (order: 4,
> 65536 bytes)
> [ 0.099621] CPU: Physical Processor ID: 0
> [ 0.103679] CPU: Processor Core ID: 0
> [ 0.107363] mce: CPU supports 6 MCE banks
> [ 0.111421] LVT offset 1 assigned for vector 0xf9
> [ 0.116195] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
> [ 0.121742] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128,
> 1GB 0
> [ 0.129423] Freeing SMP alternatives memory: 24K (ffffffff81f07000
> - ffffffff81f0d000)
> [ 0.143889] ftrace: allocating 27464 entries in 108 pages
> [ 0.194575] smpboot: Max logical packages: 1
> [ 0.198894] smpboot: APIC(0) Converting physical 0 to logical
> package 0
> [ 0.206175] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> [ 0.359506] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model:
> 0x30, stepping: 0x1)
> [ 0.367632] Performance Events: AMD PMU driver.
> [ 0.372236] ... version: 0
> [ 0.376262] ... bit width: 48
> [ 0.380407] ... generic registers: 4
> [ 0.384448] ... value mask: 0000ffffffffffff
> [ 0.389774] ... max period: 00007fffffffffff
> [ 0.395131] ... fixed-purpose events: 0
> [ 0.399160] ... event mask: 000000000000000f
> [ 0.406879] NMI watchdog: enabled on all CPUs, permanently
> consumes one hw-PMU counter.
> [ 0.415446] x86: Booting SMP configuration:
> [ 0.419659] .... node #0, CPUs: #1 #2 #3
> [ 0.665879] x86: Booted up 1 node, 4 CPUs
> [ 0.670154] smpboot: Total of 4 processors activated (7984.64
> BogoMIPS)
> [ 0.680377] devtmpfs: initialized
> [ 0.684040] x86/mm: Memory block size: 128MB
> [ 0.706675] evm: security.selinux
> [ 0.710044] evm: security.SMACK64
> [ 0.713403] evm: security.SMACK64EXEC
> [ 0.717098] evm: security.SMACK64TRANSMUTE
> [ 0.721210] evm: security.SMACK64MMAP
> [ 0.724905] evm: security.ima
> [ 0.727891] evm: security.capability
> [ 0.732147] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.742154] pinctrl core: initialized pinctrl subsystem
> [ 0.747804] RTC time: 11:05:07, date: 03/17/17
> [ 0.752853] NET: Registered protocol family 16
> [ 0.767537] cpuidle: using governor ladder
> [ 0.783548] cpuidle: using governor menu
> [ 0.787520] PCCT header not found.
> [ 0.791203] ACPI: bus type PCI registered
> [ 0.795238] acpiphp: ACPI Hot Plug PCI Controller Driver version:
> 0.5
> [ 0.802009] PCI: Using configuration type 1 for base access
> [ 0.807633] PCI: Using configuration type 1 for extended access
> [ 0.828194] HugeTLB registered 1 GB page size, pre-allocated 0
> pages
> [ 0.834606] HugeTLB registered 2 MB page size, pre-allocated 0
> pages
> [ 0.842509] ACPI: Added _OSI(Module Device)
> [ 0.846760] ACPI: Added _OSI(Processor Device)
> [ 0.851224] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.855947] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.862301] ACPI: Executed 1 blocks of module-level executable AML
> code
> [ 0.884822] ACPI: Interpreter enabled
> [ 0.888644] ACPI: (supports S0 S1 S2 S3 S4 S5)
> [ 0.893123] ACPI: Using IOAPIC for interrupt routing
> [ 0.898172] HEST: Table parsing has been initialized.
> [ 0.903282] PCI: Using host bridge windows from ACPI; if
> necessary, use "pci=nocrs" and report a bug
> [ 0.923325] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.929544] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig
> ASPM ClockPM Segments MSI]
> [ 0.938087] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug
> PME AER PCIeCapability]
> [ 0.946363] acpi PNP0A08:00: host bridge window expanded to
> [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
> [ 0.958014] PCI host bridge to bus 0000:00
> [ 0.962141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
> window]
> [ 0.968949] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
> window]
> [ 0.975774] pci_bus 0000:00: root bus resource [mem 0x000a0000-
> 0x000bffff]
> [ 0.982669] pci_bus 0000:00: root bus resource [mem 0x000c0000-
> 0x000dffff]
> [ 0.989559] pci_bus 0000:00: root bus resource [mem 0xe0000000-
> 0xffffffff]
> [ 0.996452] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 1.003006] pci 0000:00:02.2: System wakeup disabled by ACPI
> [ 1.009145] pci 0000:00:02.3: System wakeup disabled by ACPI
> [ 1.015335] pci 0000:00:02.4: System wakeup disabled by ACPI
> [ 1.021495] pci 0000:00:02.5: System wakeup disabled by ACPI
> [ 1.028235] pci 0000:00:10.0: System wakeup disabled by ACPI
> [ 1.034341] pci 0000:00:11.0: set SATA to AHCI mode
> [ 1.040018] pci 0000:00:13.0: System wakeup disabled by ACPI
> [ 1.055595] pci 0000:00:02.2: PCI bridge to [bus 01]
> [ 1.067604] pci 0000:00:02.3: PCI bridge to [bus 02]
> [ 1.079588] pci 0000:00:02.4: PCI bridge to [bus 03]
> [ 1.085374] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe
> device. You can enable it with 'pcie_aspm=force'
> [ 1.095442] pci 0000:00:02.5: PCI bridge to [bus 04]
> [ 1.101316] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12
> 15)
> [ 1.108255] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12
> 15)
> [ 1.115241] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12
> 15)
> [ 1.122200] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12
> 15)
> [ 1.129068] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12
> 15)
> [ 1.136040] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12
> 15)
> [ 1.143011] ACPI: Enabled 4 GPEs in block 00 to 1F
> [ 1.148403] vgaarb: loaded
> [ 1.152552] PCI: Using ACPI for IRQ routing
> [ 1.157439] NetLabel: Initializing
> [ 1.160862] NetLabel: domain hash size = 128
> [ 1.165236] NetLabel: protocols = UNLABELED CIPSOv4
> [ 1.170316] NetLabel: unlabeled traffic allowed by default
> [ 1.176354] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 1.181388] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
> [ 1.190383] clocksource: Switched to clocksource hpet
> [ 1.223376] VFS: Disk quotas dquot_6.6.0
> [ 1.227468] VFS: Dquot-cache hash table entries: 512 (order 0,
> 4096 bytes)
> [ 1.234736] AppArmor: AppArmor Filesystem Enabled
> [ 1.239751] pnp: PnP ACPI init
> [ 1.243716] system 00:00: [mem 0xfec10002-0xfec11001] has been
> reserved
> [ 1.251055] pnp: PnP ACPI: found 3 devices
> [ 1.268940] clocksource: acpi_pm: mask: 0xffffff max_cycles:
> 0xffffff, max_idle_ns: 2085701024 ns
> [ 1.277962] pci 0000:00:02.2: PCI bridge to [bus 01]
> [ 1.282955] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
> [ 1.289091] pci 0000:00:02.2: bridge window [mem 0xfe500000-
> 0xfe5fffff]
> [ 1.295938] pci 0000:00:02.3: PCI bridge to [bus 02]
> [ 1.300934] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
> [ 1.307059] pci 0000:00:02.3: bridge window [mem 0xfe600000-
> 0xfe6fffff]
> [ 1.313875] pci 0000:00:02.4: PCI bridge to [bus 03]
> [ 1.318897] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
> [ 1.325016] pci 0000:00:02.4: bridge window [mem 0xfe700000-
> 0xfe7fffff]
> [ 1.331835] pci 0000:00:02.5: PCI bridge to [bus 04]
> [ 1.336831] pci 0000:00:02.5: bridge window [mem 0xfe800000-
> 0xfe8fffff]
> [ 1.343873] NET: Registered protocol family 2
> [ 1.349187] TCP established hash table entries: 32768 (order: 6,
> 262144 bytes)
> [ 1.356864] TCP bind hash table entries: 32768 (order: 7, 524288
> bytes)
> [ 1.363844] TCP: Hash tables configured (established 32768 bind
> 32768)
> [ 1.370530] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [ 1.376672] UDP-Lite hash table entries: 2048 (order: 4, 65536
> bytes)
> [ 1.383408] NET: Registered protocol family 1
> [ 1.389045] Unpacking initramfs...
> [ 3.739542] Freeing initrd memory: 31760K (ffff8800341e8000 -
> ffff8800360ec000)
> [ 3.746980] PCI-DMA: Using software bounce buffering for IO
> (SWIOTLB)
> [ 3.753445] software IO TLB [mem 0xdbfae000-0xdffae000] (64MB)
> mapped at [ffff8800dbfae000-ffff8800dffadfff]
> [ 3.763462] perf: AMD NB counters detected
> [ 3.767619] perf: AMD L2I counters detected
> [ 3.771919] LVT offset 0 assigned for vector 0x400
> [ 3.776764] perf: AMD IBS detected (0x000000ff)
> [ 3.781748] Scanning for low memory corruption every 60 seconds
> [ 3.789103] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 3.795529] audit: initializing netlink subsys (disabled)
> [ 3.801019] audit: type=2000 audit(1489748709.556:1): initialized
> [ 3.808731] Initialise system trusted keyring
> [ 3.813569] workingset: timestamp_bits=33 max_order=20
> bucket_order=0
> [ 3.828920] zbud: loaded
> [ 3.832485] Key type big_key registered
> [ 3.838199] Key type asymmetric registered
> [ 3.842367] Asymmetric key parser 'x509' registered
> [ 3.847496] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 247)
> [ 3.855049] io scheduler noop registered
> [ 3.859008] io scheduler deadline registered (default)
> [ 3.864317] io scheduler cfq registered
> [ 3.870309] pcieport 0000:00:02.2: Signaling PME through PCIe PME
> interrupt
> [ 3.877297] pci 0000:01:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.883993] pcieport 0000:00:02.3: Signaling PME through PCIe PME
> interrupt
> [ 3.890980] pci 0000:02:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.897590] pcieport 0000:00:02.4: Signaling PME through PCIe PME
> interrupt
> [ 3.904578] pci 0000:03:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.911240] pcieport 0000:00:02.5: Signaling PME through PCIe PME
> interrupt
> [ 3.918230] pci 0000:04:00.0: Signaling PME through PCIe PME
> interrupt
> [ 3.924852] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 3.930469] pciehp: PCI Express Hot Plug Controller Driver
> version: 0.4
> [ 3.937390] GHES: Failed to enable APEI firmware first mode.
> [ 3.943420] Serial: 8250/16550 driver, 32 ports, IRQ sharing
> enabled
> [ 3.970484] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
> 115200) is a 16550A
> [ 3.998719] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
> 115200) is a 16550A
> [ 4.014850] PPP generic driver version 2.4.2
> [ 4.019380] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [ 5.081170] i8042: No controller found
> [ 5.084967] tsc: Refined TSC clocksource calibration: 998.127 MHz
> [ 5.087086] mousedev: PS/2 mouse device common for all mice
> [ 5.087428] rtc_cmos 00:01: RTC can wake from S4
> [ 5.087780] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 5.087828] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram,
> hpet irqs
> [ 5.087895] ledtrig-cpu: registered to indicate activity on CPUs
> [ 5.089351] NET: Registered protocol family 10
> [ 5.090285] NET: Registered protocol family 17
> [ 5.091363] microcode: CPU0: patch_level=0x07030105
> [ 5.091383] microcode: CPU1: patch_level=0x07030105
> [ 5.091401] microcode: CPU2: patch_level=0x07030105
> [ 5.096711] microcode: CPU3: patch_level=0x07030105
> [ 5.096851] microcode: Microcode Update Driver: v2.01 <tigran at aiva
> zian.fsnet.co.uk>, Peter Oruba
> [ 5.097541] registered taskstats version 1
> [ 5.097587] Loading compiled-in X.509 certificates
> [ 5.110377] Loaded X.509 cert 'Build time autogenerated kernel
> key: 5416e2c482d66dd0c34159ae8c9fc4066f19244c'
> [ 5.110501] zswap: loaded using pool lzo/zbud
> [ 5.124473] Key type encrypted registered
> [ 5.124489] AppArmor: AppArmor sha1 policy hashing enabled
> [ 5.124499] ima: No TPM chip found, activating TPM-bypass!
> [ 5.124554] evm: HMAC attrs: 0x1
> [ 5.125622] Magic number: 9:935:74
> [ 5.125654] hash matches
> /home/kernel/COD/linux/drivers/base/power/main.c:1173
> [ 5.129672] rtc_cmos 00:01: setting system clock to 2017-03-17
> 11:05:11 UTC (1489748711)
> [ 5.218993] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x1cc65b93289, max_idle_ns: 881590487074 ns
> [ 5.237810] Freeing unused kernel memory: 1764K (ffffffff81d4e000
> - ffffffff81f07000)
> [ 5.245882] Write protecting the kernel read-only data: 12288k
> [ 5.253822] Freeing unused kernel memory: 1372K (ffff8800016a9000
> - ffff880001800000)
> [ 5.274885] Freeing unused kernel memory: 1020K (ffff880001b01000
> - ffff880001c00000)
> Loading, please wait...
> starting version 229
> [ 5.326041] random: systemd-udevd urandom read with 6 bits of
> entropy available
> [ 5.455457] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 5.464867] ACPI: Power Button [PWRB]
> [ 5.469233] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 5.477557] ACPI: Power Button [PWRF]
> [ 5.493751] FUJITSU Extended Socket Network Device Driver -
> version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
> [ 5.557504] pps_core: LinuxPPS API ver. 1 registered
> [ 5.562882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti at linux.it>
> [ 5.583371] PTP clock support registered
> [ 5.596841] dca service started, version 1.12.1
> [ 5.623874] SCSI subsystem initialized
> [ 5.638623] ACPI: bus type USB registered
> [ 5.656778] usbcore: registered new interface driver usbfs
> [ 5.662875] usbcore: registered new interface driver hub
> [ 5.668853] sdhci: Secure Digital Host Controller Interface driver
> [ 5.675416] sdhci: Copyright(c) Pierre Ossman
> [ 5.677246] usbcore: registered new device driver usb
> [ 5.693963] igb: Intel(R) Gigabit Ethernet Network Driver -
> version 5.3.0-k
> [ 5.701702] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 5.721300] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 5.745593] xhci_hcd 0000:00:10.0: xHCI Host Controller
> [ 5.751749] ehci-pci: EHCI PCI platform driver
> [ 5.763100] xhci_hcd 0000:00:10.0: new USB bus registered,
> assigned bus number 1
> [ 5.780590] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci
> version 0x100 quirks 0x00000410
> [ 5.780825] pps pps0: new PPS source ptp0
> [ 5.780832] igb 0000:01:00.0: added PHC on eth0
> [ 5.780836] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 5.780841] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1)
> 00:0d:b9:41:6a:cc
> [ 5.780847] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
> [ 5.780852] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx
> queue(s), 4 tx queue(s)
> [ 5.813076] pps pps1: new PPS source ptp1
> [ 5.813084] igb 0000:02:00.0: added PHC on eth1
> [ 5.813088] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 5.813119] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1)
> 00:0d:b9:41:6a:cd
> [ 5.813125] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
> [ 5.813130] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx
> queue(s), 4 tx queue(s)
> [ 5.847617] pps pps2: new PPS source ptp2
> [ 5.847624] igb 0000:03:00.0: added PHC on eth2
> [ 5.847655] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 5.847660] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1)
> 00:0d:b9:41:6a:ce
> [ 5.847666] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
> [ 5.847671] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx
> queue(s), 4 tx queue(s)
> [ 5.907438] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 5.914985] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 5.923108] usb usb1: Product: xHCI Host Controller
> [ 5.928591] usb usb1: Manufacturer: Linux 4.6.2-040602-generic
> xhci-hcd
> [ 5.935916] usb usb1: SerialNumber: 0000:00:10.0
> [ 5.943634] hub 1-0:1.0: USB hub found
> [ 5.951103] hub 1-0:1.0: 2 ports detected
> [ 5.956425] xhci_hcd 0000:00:10.0: xHCI Host Controller
> [ 5.963353] xhci_hcd 0000:00:10.0: new USB bus registered,
> assigned bus number 2
> [ 5.980978] usb usb2: We don't know the algorithms for LPM for
> this host, disabling LPM.
> [ 5.990706] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0003
> [ 5.998255] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 6.006114] usb usb2: Product: xHCI Host Controller
> [ 6.011478] usb usb2: Manufacturer: Linux 4.6.2-040602-generic
> xhci-hcd
> [ 6.018719] usb usb2: SerialNumber: 0000:00:10.0
> [ 6.033613] hub 2-0:1.0: USB hub found
> [ 6.038962] hub 2-0:1.0: 2 ports detected
> [ 6.044193] sdhci-pci 0000:00:14.7: SDHCI controller found
> [1022:7813] (rev 1)
> [ 6.054399] mmc0: SDHCI controller on PCI [0000:00:14.7] using
> ADMA 64-bit
> [ 6.063179] ehci-pci 0000:00:13.0: EHCI Host Controller
> [ 6.068977] ehci-pci 0000:00:13.0: new USB bus registered,
> assigned bus number 3
> [ 6.076923] ehci-pci 0000:00:13.0: applying AMD
> SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [ 6.086462] ehci-pci 0000:00:13.0: debug port 2
> [ 6.093252] igb 0000:01:00.0 enp1s0: renamed from eth0
> [ 6.095904] ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
> [ 6.107178] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
> [ 6.116020] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 6.123525] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 6.131228] usb usb3: Product: EHCI Host Controller
> [ 6.136297] usb usb3: Manufacturer: Linux 4.6.2-040602-generic
> ehci_hcd
> [ 6.143107] usb usb3: SerialNumber: 0000:00:13.0
> [ 6.148696] hub 3-0:1.0: USB hub found
> [ 6.152774] hub 3-0:1.0: 2 ports detected
> [ 6.153619] igb 0000:02:00.0 enp2s0: renamed from eth1
> [ 6.164845] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6
> Gbps 0x3 impl SATA mode
> [ 6.173637] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led
> clo pmp fbs pio slum part
> [ 6.183460] igb 0000:03:00.0 enp3s0: renamed from eth2
> [ 6.190406] scsi host0: ahci
> [ 6.196981] scsi host1: ahci
> [ 6.200788] ata1: SATA max UDMA/133 abar m1024 at 0xfeb25000 port
> 0xfeb25100 irq 19
> [ 6.208817] ata2: SATA max UDMA/133 abar m1024 at 0xfeb25000 port
> 0xfeb25180 irq 19
> [ 6.219100] clocksource: Switched to clocksource tsc
> [ 6.474914] usb 3-1: new high-speed USB device number 2 using
> ehci-pci
> [ 6.525545] ata2: SATA link down (SStatus 0 SControl 300)
> [ 6.611319] usb 3-1: New USB device found, idVendor=0438,
> idProduct=7900
> [ 6.618272] usb 3-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 6.627790] hub 3-1:1.0: USB hub found
> [ 6.632578] hub 3-1:1.0: 4 ports detected
> [ 6.686998] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 6.700093] ata1.00: ATA-8: KINGSTON SMS200S3120G, 608ABBF0, max
> UDMA/133
> [ 6.707153] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> [ 6.719510] ata1.00: configured for UDMA/133
> [ 6.724452] scsi 0:0:0:0: Direct-Access ATA KINGSTON
> SMS200S BBF0 PQ: 0 ANSI: 5
> [ 6.786729] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks:
> (120 GB/112 GiB)
> [ 6.795467] sd 0:0:0:0: [sda] Write Protect is off
> [ 6.800688] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 6.814310] sda: sda1 sda2 < sda5 >
> [ 6.819609] sd 0:0:0:0: [sda] Attached SCSI disk
> Begin: Loading essential drivers ... done.
> Begin: Running /scripts/init-premount ... done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-
> top ... done.
> Begin: Running /scripts/local-premount ... done.
> Begin: Will now check root file system ... fsck from util-linux
> 2.27.1
> [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
> /dev/sda1: recovering journal
> /dev/sda1: clean, 161086/7069696 files, 1239085/28260864 blocks
> done.
> [ 7.096715] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: (null)
> done.
> Begin: Running /scripts/local-bottom ... done.
> Begin: Running /scripts/init-bottom ... done.
> [ 7.328271] systemd[1]: systemd 229 running in system mode. (+PAM
> +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
> +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
> [ 7.347155] systemd[1]: Detected architecture x86-64.
>
> Welcome to Ubuntu 16.04.1 LTS!
>
> [ 7.363358] systemd[1]: Set hostname to <ubuntu>.
> [ 7.524924] systemd[1]: Reached target User and Group Name
> Lookups.
> [ OK ] Reached target User and Group Name Lookups.
> [ 7.543540] systemd[1]: Created slice User and Session Slice.
> [ OK ] Created slice User and Session Slice.
> [ 7.559219] systemd[1]: Listening on fsck to fsckd communication
> Socket.
> [ OK ] Listening on fsck to fsckd communication Socket.
> [ 7.579277] systemd[1]: Listening on Journal Socket.
> [ OK ] Listening on Journal Socket.
> [ 7.595248] systemd[1]: Listening on Journal Socket (/dev/log).
> [ OK ] Listening on Journal Socket (/dev/log).
> [ 7.611198] systemd[1]: Listening on /dev/initctl Compatibility
> Named Pipe.
> [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
> [ 7.631682] systemd[1]: Set up automount Arbitrary Executable File
> Formats File System Automount Point.
> [ OK ] Set up automount Arbitrary Executab...ats File System
> Automount Point.
> [ 7.655165] systemd[1]: Reached target Remote File Systems (Pre).
> [ OK ] Reached target Remote File Systems (Pre).
> [ 7.671097] systemd[1]: Reached target Remote File Systems.
> [ OK ] Reached target Remote File Systems.
> [ 7.687419] systemd[1]: Listening on Journal Audit Socket.
> [ OK ] Listening on Journal Audit Socket.
> [ 7.703266] systemd[1]: Listening on udev Control Socket.
> [ OK ] Listening on udev Control Socket.
> [ 7.719148] systemd[1]: Reached target Encrypted Volumes.
> [ OK ] Reached target Encrypted Volumes.
> [ 7.735200] systemd[1]: Listening on udev Kernel Socket.
> [ OK ] Listening on udev Kernel Socket.
> [ 7.751234] systemd[1]: Listening on Syslog Socket.
> [ OK ] Listening on Syslog Socket.
> [ 7.767290] systemd[1]: Started Forward Password Requests to Wall
> Directory Watch.
> [ OK ] Started Forward Password Requests to Wall Directory Watch.
> [ 7.787412] systemd[1]: Created slice System Slice.
> [ OK ] Created slice System Slice.
> [ 7.819316] systemd[1]: Starting Nameserver information manager...
> Starting Nameserver information manager...
> [ 7.837805] systemd[1]: Started Read required files in advance.
> [ OK ] Started Read required files in advance.
> [ 7.858692] systemd[1]: Starting Set console keymap...
> Starting Set console keymap...
> [ 7.877943] systemd[1]: Mounting POSIX Message Queue File
> System...
> Mounting POSIX Message Queue File System...
> [ 7.897934] systemd[1]: Starting Journal Service...
> Starting Journal Service...
> [ 7.913848] systemd[1]: Starting Uncomplicated firewall...
> Starting Uncomplicated firewall...
> [ 7.927338] systemd[1]: Reached target Slices.
> [ OK ] Reached target Slices.
> [ 7.939855] systemd[1]: Created slice system-
> serial\x2dgetty.slice.
> [ OK ] Created slice system-serial\x2dgetty.slice.
> [ 7.983726] systemd[1]: Starting Load Kernel Modules...
> Starting Load Kernel Modules...
> [ 8.002138] systemd[1]: Starting Create list of required static
> device nodes for the current kernel...
> Starting Create list of required st... nodes for the current
> kernel...
> [ 8.025922] systemd[1]: Mounting Debug File System...
> Mounting Debug File System...
> [ 8.042240] systemd[1]: Mounting Huge Pages File System...
> Mounting Huge Pages File System...
> [ 8.066109] systemd[1]: Mounted Debug File System.
> [ OK ] Mounted Debug File System.
> [ 8.079252] systemd[1]: Mounted POSIX Message Queue File System.
> [ OK ] Mounted POSIX Message Queue File System.
> [ 8.095288] systemd[1]: Mounted Huge Pages File System.
> [ OK ] Mounted Huge Pages File System.
> [ 8.111736] systemd[1]: Started Journal Service.
> [ OK ] Started Journal Service.
> [ OK ] Started Set console keymap.
> [ OK ] Started Uncomplicated firewall.
> [ OK ] Started Load Kernel Modules.
> [ OK ] Started Create list of required sta...ce nodes for the
> current kernel.
> [ OK ] Started Nameserver information manager.
> Starting Create Static Device Nodes in /dev...
> Starting Apply Kernel Variables...
> [ OK ] Started Create Static Device Nodes in /dev.
> [ OK ] Started Apply Kernel Variables.
> Starting udev Kernel Device Manager...
> [ OK ] Started udev Kernel Device Manager.
> Starting Remount Root and Kernel File Systems...
> [ OK ] Started Remount Root and Kernel File Systems.
> Starting Load/Save Random Seed...
> Starting Flush Journal to Persistent Storage...
> [ OK ] Reached target Local File Systems (Pre).
> Starting udev Coldplug all Devices...
> [ OK ] Reached target Local File Systems.
> Starting Tell Plymouth To Write Out Runtime Data...
> Starting Set console font and keymap...
> Starting LSB: AppArmor initialization...
> [ OK ] Started Load/Save Random Seed.
> [ OK ] Started Tell Plymouth To Write Out Runtime Data.
> [ OK ] Started Flush Journal to Persistent Storage.
> Starting Create Volatile Files and Directories...
> [ OK ] Started udev Coldplug all Devices.
> [ OK ] Started Create Volatile Files and Directories.
> Starting Update UTMP about System Boot/Shutdown...
> Starting Network Time Synchronization...
> [ OK ] Started Dispatch Password Requests to Console Directory
> Watch.
> [ OK ] Started Update UTMP about System Boot/Shutdown.
> [ OK ] Started Network Time Synchronization.
> [ OK ] Reached target System Time Synchronized.
> [ OK ] Started LSB: AppArmor initialization.
> Starting Raise network interfaces...
> [ OK ] Started Set console font and keymap.
> [ OK ] Created slice system-getty.slice.
> [ OK ] Started ifup for enp2s0.
> [ OK ] Found device /dev/ttyS0.
> [ OK ] Found device I210 Gigabit Network Connection.
> [ OK ] Found device KINGSTON_SMS200S3120G 5.
> Activating swap /dev/disk/by-uuid/d...3-00a7-45e6-8ea5-
> f5b318efb217...
> [ OK ] Activated swap /dev/disk/by-uuid/d30b3493-00a7-45e6-8ea5-
> f5b318efb217.
> [ OK ] Reached target Swap.
> [ OK ] Reached target System Initialization.
> [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
> [ OK ] Listening on D-Bus System Message Bus Socket.
> [ OK ] Started Trigger resolvconf update for networkd DNS.
> [ OK ] Reached target Paths.
> [ OK ] Started Daily Cleanup of Temporary Directories.
> [ OK ] Started Daily apt activities.
> [ OK ] Reached target Timers.
> [ OK ] Listening on UUID daemon activation socket.
> [ OK ] Reached target Sockets.
> [ OK ] Reached target Basic System.
> Starting Permit User Sessions...
> Starting Login Service...
> [ OK ] Started Regular background program processing daemon.
> Starting LSB: Set the CPU Frequency Scaling governor to
> "ondemand"...
> Starting LSB: daemon to balance interrupts for SMP
> systems...
> Starting Accounts Service...
> Starting LSB: Record successful boot for GRUB...
> [ OK ] Started D-Bus System Message Bus.
> Starting Network Manager...
> [ OK ] Started GPS (Global Positioning System) Daemon.
> Starting System Logging Service...
> Starting Restore /etc/resolv.conf i...re the ppp link was
> shut down...
> [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill
> Watch.
> [ OK ] Started System Logging Service.
> [ OK ] Started Permit User Sessions.
> [ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was
> shut down.
> [ OK ] Started LSB: Set the CPU Frequency Scaling governor to
> "ondemand".
> [ OK ] Started LSB: Record successful boot for GRUB.
> [ OK ] Started LSB: daemon to balance interrupts for SMP systems.
> [ OK ] Started Network Manager.
> [ OK ] Started Login Service.
> Starting Network Manager Script Dispatcher Service...
> Starting Network Manager Wait Online...
> Starting Authenticate and Authorize Users to Run Privileged
> Tasks...
> Starting Load/Save RF Kill Switch Status...
> [ OK ] Started Network Manager Script Dispatcher Service.
> [ OK ] Started Load/Save RF Kill Switch Status.
> [ OK ] Started Authenticate and Authorize Users to Run Privileged
> Tasks.
> [ OK ] Started Accounts Service.
> [ OK ] Started Raise network interfaces.
> Starting Hostname Service...
> [ OK ] Reached target Network.
> Starting OpenBSD Secure Shell server...
> [ OK ] Started Hostname Service.
> [ OK ] Started OpenBSD Secure Shell server.
> Starting WPA supplicant...
> [ OK ] Started WPA supplicant.
> [ OK ] Started Network Manager Wait Online.
> [ OK ] Reached target Network is Online.
> Starting LSB: Start xrdp and sesman daemons...
> Starting LSB: Starts or stops the xinetd daemon....
> [ OK ] Started ISC DHCP IPv4 server.
> Starting /etc/rc.local Compatibility...
> [ OK ] Started /etc/rc.local Compatibility.
> Starting Terminate Plymouth Boot Screen...
> Starting Hold until boot process finishes up...
> [ OK ] Started Terminate Plymouth Boot Screen.
> [ OK ] Started Hold until boot process finishes up.
> Starting Set console scheme...
> [ OK ] Started Serial Getty on ttyS0.
> [ OK ] Started Getty on tty1.
> [ OK ] Reached target Login Prompts.
> [ OK ] Started Set console scheme.
> [ OK ] Started LSB: Starts or stops the xinetd daemon..
> [ OK ] Started LSB: Start xrdp and sesman daemons.
> [ OK ] Reached target Multi-User System.
> [ OK ] Reached target Graphical Interface.
> Starting Update UTMP about System Runlevel Changes...
> [ OK ] Started Stop ureadahead data collection 45s after completed
> startup.
> [ OK ] Started Update UTMP about System Runlevel Changes.
>
> Ubuntu 16.04.1 LTS ubuntu ttyS0
>
> ubuntu login: go
> Password:
> Last login: Fri Mar 17 12:03:44 CET 2017 on ttyS0
> Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.6.2-040602-generic x86_64)
>
> * Documentation: https://help.ubuntu.com
> * Management: https://landscape.canonical.com
> * Support: https://ubuntu.com/advantage
> go at ubuntu:~$ lsusb
> Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> go at ubuntu:~$
>
> -----Ursprüngliche Nachricht-----
> Von: Dan Williams [mailto:dcbw at redhat.com]
> Gesendet: Samstag, 18. März 2017 04:47
> An: Thomas Lang <thomas.lang at tactilo.eu>; ModemManager (development)
> <modemmanager-devel at lists.freedesktop.org>
> Betreff: Re: MC7455 not listed as usb device any more after reboot
>
> On Fri, 2017-03-17 at 11:57 +0000, Thomas Lang wrote:
> > Hi all,
> > perhaps you have seen this bug before. I’m using the MC7455 with a
> > linux system after normal power cycle (unplugged power) the mc
> > 7455
> > can be found with lsusb:
> >
> >
> >
> > go at ubuntu:~$ lsusb
> >
> > Bus 003 Device 003: ID 1199:9071 Sierra Wireless, Inc.
> >
> > Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
> >
> > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> >
> > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> >
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> >
> > If I do a reboot, the mc7455 is not listed anymore.
> >
> > Any ideas what might be the problem?
>
> That's probably an issue with system BIOS or the kernel's USB stack,
> unfortunately. You'd want to enable debugging in the kernel drivers
> for your USB HCI and then figure out why the device fails to be
> enumerated. There may even be logging for that already, check
> "dmesg"
> for lines including "ehci" (USB 2), "ochi" (USB 1), and "xhci" (USB
> 3) when the device fails to appear; perhaps something will show up
> for "3- 4", eg:
>
> kernel: usb 3-4: new high-speed USB device number 2 using xhci_hcd
>
> but if that device then fails to enumerate itself, the kernel won't
> show it in lsusb since it can't get any information from it.
>
> In any case, this sounds like a USB stack issue.
>
> Dan
> _______________________________________________
> ModemManager-devel mailing list
> ModemManager-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
More information about the ModemManager-devel
mailing list