Band 28 not appearing in mmcli output
Reinhard Speyerer
rspmn at arcor.de
Tue Nov 6 13:32:36 UTC 2018
On Tue, Nov 06, 2018 at 09:11:00AM +0100, Aleksander Morgado wrote:
> Hey,
>
> > I got it installed, but it is still missing band 28 in the mmcli and qmicli output. It is a MC7430 in QMI mode. Any special requirements?
> >
> >
> > Bands | supported: 'utran-1, utran-6, utran-5, utran-8, utran-9, eutran-1, eutran-3, eutran-5, eutran-7, eutran-8, eutran-18, eutran-19, eutran-21, eutran-38, eutran-39, eutran-40, eutran-41, utran-19'
> > | current: 'unknown'
> > -------------------------
> >
> >
> > # qmicli -d /dev/cdc-wdm0 -p --dms-get-band-capabilities
> > [/dev/cdc-wdm0] Device band capabilities retrieved:
> > Bands: 'wcdma-2100, wcdma-850-us, wcdma-800, wcdma-900, wcdma-1700-japan, wcdma-850-japan'
> > LTE bands: '1, 3, 5, 7, 8, 18, 19, 21, 38, 39, 40, 41'
> >
>
> Well, looks like the modem doesn't report the "Extended LTE Band
> Capability" TLV in the Get Band Capabilities response; probably a
> limitation of the firmware. Is this using the latest firmware version?
>
Hi Aleksander,
the "Extended LTE Band Capability" TLV only seems to be used by devices
which use LTE bands > 64. For other devices flags which are marked as
"reserved" in the latest/last(?) GobiAPI_2013-07-31-1347.tar.gz are used
which explains why some LTE bands are missing in mmcli/qmicli output for
devices like the MC7430:
Sierra Wireless EM7565:
DMSGetBandCapabilities 3000
+OK DMSGetBandCapabilities 020400000000000108000000c00f00000610100800df190eba00a7000011080000000000000000001232001800010002000300040005000700080009000c000d001200130014001a001c001d001e00200029002a002b002e0030004200
Sierra Wireless MC7455:
DMSGetBandCapabilities 3000
+OK DMSGetBandCapabilities 020400000000001108000000000000000000100800df180833000100000108000000c00700000200
Sierra Wireless MC7430:
DMSGetBandCapabilities 3000
+OK DMSGetBandCapabilities 020400000000001108000000000000000000100800d5001608e00100000108000000400c00000610
Quectel BG96:
DMSGetBandCapabilities 3000
+OK DMSGetBandCapabilities 0204000000000001080080032800000000001008009f180f0a40000000
This also applies to NASGetSystemSelectionPref/NASSetSystemSelectionPref.
Regards,
Reinhard
More information about the ModemManager-devel
mailing list