problems with QMI dual stack connections from MM - works with qmicli

[Bjørn Mork]

FYI, dual stack works after reordering the connection sequence a bit:


root at finn:/# mmcli -b 1
  ------------------------------------
  General            |           path: /org/freedesktop/ModemManager1/Bearer/1
                     |           type: default
  ------------------------------------
  Status             |      connected: yes
                     |      suspended: no
                     |    multiplexed: yes
                     |      interface: qmimux0
                     |     ip timeout: 20
  ------------------------------------
  Properties         |            apn: telenor.smart
                     |        roaming: allowed
                     |        ip type: ipv4v6
  ------------------------------------
  IPv4 configuration |         method: static
                     |        address: 10.205.79.109
                     |         prefix: 30
                     |        gateway: 10.205.79.110
                     |            dns: 193.213.112.4, 130.67.15.198
                     |            mtu: 1500
  ------------------------------------
  IPv6 configuration |         method: static
                     |        address: 2a02:2121:286:1ec2:19e4:7b6a:1fe2:de07
                     |         prefix: 64
                     |        gateway: 2a02:2121:286:1ec2:a550:56eb:e806:5a4e
                     |            dns: 2001:4600:4:fff::52, 2001:4600:4:1fff::52
                     |            mtu: 1540
  ------------------------------------
  Statistics         |       duration: 900
                     |       bytes rx: 9926
                     |       bytes tx: 11654
                     |       attempts: 1
                     | total-duration: 900
                     | total-bytes rx: 9926
                     | total-bytes tx: 11654



Bjørn