[Nouveau] GM108GLM?

Sune Mølgaard smo at translucent.dk
Thu Dec 8 13:46:20 UTC 2016


Aha! That seems to do it.

If I interpret correctly, it doesn't set it quite to full power, though,
but it's certainly an improvement:

07: core 405 MHz memory 810 MHz
0a: core 270-1124 MHz memory 1600 MHz
0f: core 270-1124 MHz memory 2002 MHz AC DC *
AC: core 1012 MHz memory 2002 MHz

A short run of glmark2 shows aver 100% improvement to ~550 FPS.

Interestingly, it's still nowhere near a match for the built-in
Broadwell-U with i915, which runs at ~1400 - ~1900 FPS.

Thank you very much - I'll keep a look-out for future improvements :-)

Best regards,

Sune Mølgaard

On 2016-12-08 14:14, Karol Herbst wrote:
> also you can't change the clocks when there is nothing running on the
> GPU. I have some patches pending for this in another series, but maybe
> I may be able toe extract those fixes.
> 
> Changing the clocks while something is running shouldn't cause any
> troubles. Alternatively if you don't care about power consumption, you
> can boot with nouveau.runpm=0 so that the gpu is always on.
> 
> 2016-12-08 13:25 GMT+01:00 Sune Mølgaard <smo at translucent.dk>:
>> Hi,
>>
>> With drm-next from
>> http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-next/2016-12-08/
>>
>> I don't get the error messages, but I still get a soft cpu lockup.
>>
>> What info would you need from me to get it working?
>>
>> Best regards,
>>
>> Sune Mølgaard
>>
>>
>> On 2016-12-08 08:10, Karol Herbst wrote:
>>> hi,
>>>
>>> give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with 4.9, so 4.10 is required.
>>>
>>> Greetings.
>>>
>>> On 7 December 2016 10:26:44 a.m. GMT+01:00, "Sune Mølgaard" <smo at translucent.dk> wrote:
>>>> Hi again,
>>>>
>>>> It works :-)
>>>>
>>>> Reclocking, however, is another kettle of fish.
>>>>
>>>> Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X.
>>>>
>>>> Trying the same with no X running reveals:
>>>>
>>>> Dec  7 10:08:42 dell-smo kernel: [  728.831020] nouveau 0000:08:00.0:
>>>> clk: unable to find matching pll values
>>>>
>>>> a number of time as then soft lockup.
>>>>
>>>> Very much akin to
>>>> https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14
>>>> , actually, so what I gather from that is that I need to provide you
>>>> guys with some info about the card, so which do you need, and how do I
>>>> extract them?
>>>>
>>>> Best regards,
>>>>
>>>> Sune Mølgaard
>>>>
>>>> On 2016-10-27 11:06, Pierre Moreau wrote:
>>>>> Hello,
>>>>>
>>>>> The idea was to use the modesetting DDX instead of Nouveau’s one for
>>>> Maxwell+
>>>>> as EXA was [broken][1]. But you can give a try at Ilia’s
>>>> [patches][2], which
>>>>> fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been
>>>> tested on a
>>>>> GM108 yet).
>>>>>
>>>>> Best regards,
>>>>> Pierre Moreau
>>>>>
>>>>> [1]:
>>>> https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc
>>>>> [2]: https://github.com/imirkin/xf86-video-nouveau/
>>>>>
>>>>>
>>>>> On 11:29 am - Oct 18 2016, Sune Mølgaard wrote:
>>>>>> Hi,
>>>>>>
>>>>>> It would seem like it (attachments are from 4.9-rc1, btw), but it
>>>>>> doesn't look like there is any support in the Xorg driver.
>>>>>>
>>>>>> How can I help with that?
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> Sune Mølgaard
>>>>>> Translucent ApS
>>>>>>
>>>>>> On 2016-04-22 09:33, Pierre Moreau wrote:
>>>>>>> Hello,
>>>>>>>
>>>>>>> A patch was merged yesterday to recognise GM108 (see
>>>>>>>
>>>> https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e).
>>>>>>> I guess it will make it into 4.7.
>>>>>>>
>>>>>>> Pierre
>>>>>>
>>>>>
>>>>>> lspci -vvvv
>>>>>> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI
>>>> (rev 09)
>>>>>>    Subsystem: Lenovo Broadwell-U Host Bridge -OPI
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort+ >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: bdw_uncore
>>>>>>
>>>>>> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U
>>>> Integrated Graphics (rev 09) (prog-if 00 [VGA controller])
>>>>>>    Subsystem: Lenovo Broadwell-U Integrated Graphics
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin A routed to IRQ 49
>>>>>>    Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M]
>>>>>>    Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
>>>>>>    Region 4: I/O ports at 4000 [size=64]
>>>>>>    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: i915
>>>>>>    Kernel modules: i915
>>>>>>
>>>>>> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller
>>>> (rev 09)
>>>>>>    Subsystem: Lenovo Broadwell-U Audio Controller
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin A routed to IRQ 50
>>>>>>    Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: snd_hda_intel
>>>>>>    Kernel modules: snd_hda_intel
>>>>>>
>>>>>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI
>>>> Controller (rev 03) (prog-if 30 [XHCI])
>>>>>>    Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin A routed to IRQ 42
>>>>>>    Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: xhci_hcd
>>>>>>
>>>>>> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP
>>>> MEI Controller #1 (rev 03)
>>>>>>    Subsystem: Lenovo Wildcat Point-LP MEI Controller
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin A routed to IRQ 46
>>>>>>    Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: mei_me
>>>>>>    Kernel modules: mei_me
>>>>>>
>>>>>> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection
>>>> (3) I218-V (rev 03)
>>>>>>    Subsystem: Lenovo Ethernet Connection (3) I218-V
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin A routed to IRQ 43
>>>>>>    Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K]
>>>>>>    Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K]
>>>>>>    Region 2: I/O ports at 4080 [size=32]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: e1000e
>>>>>>    Kernel modules: e1000e
>>>>>>
>>>>>> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High
>>>> Definition Audio Controller (rev 03)
>>>>>>    Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 32, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin A routed to IRQ 47
>>>>>>    Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: snd_hda_intel
>>>>>>    Kernel modules: snd_hda_intel
>>>>>>
>>>>>> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express
>>>> Root Port #6 (rev e3) (prog-if 00 [Normal decode])
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin B routed to IRQ 17
>>>>>>    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>>>>>>    I/O behind bridge: 0000f000-00000fff
>>>>>>    Memory behind bridge: f4100000-f41fffff
>>>>>>    Prefetchable memory behind bridge:
>>>> 00000000fff00000-00000000000fffff
>>>>>>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort+ <SERR- <PERR-
>>>>>>    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>>>>            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: pcieport
>>>>>>    Kernel modules: shpchp
>>>>>>
>>>>>> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express
>>>> Root Port #3 (rev e3) (prog-if 00 [Normal decode])
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin C routed to IRQ 18
>>>>>>    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>>>>>>    I/O behind bridge: 0000f000-00000fff
>>>>>>    Memory behind bridge: f4000000-f40fffff
>>>>>>    Prefetchable memory behind bridge:
>>>> 00000000fff00000-00000000000fffff
>>>>>>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort+ <SERR- <PERR-
>>>>>>    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>>>>            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: pcieport
>>>>>>    Kernel modules: shpchp
>>>>>>
>>>>>> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express
>>>> Root Port #5 (rev e3) (prog-if 00 [Normal decode])
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin A routed to IRQ 16
>>>>>>    Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>>>>>>    I/O behind bridge: 00003000-00003fff
>>>>>>    Memory behind bridge: f3000000-f3ffffff
>>>>>>    Prefetchable memory behind bridge:
>>>> 00000000e0000000-00000000f1ffffff
>>>>>>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort+ <SERR- <PERR-
>>>>>>    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>>>>>>            PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: pcieport
>>>>>>    Kernel modules: shpchp
>>>>>>
>>>>>> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI
>>>> Controller (rev 03) (prog-if 20 [EHCI])
>>>>>>    Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin A routed to IRQ 23
>>>>>>    Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: ehci-pci
>>>>>>
>>>>>> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC
>>>> Controller (rev 03)
>>>>>>    Subsystem: Lenovo Wildcat Point-LP LPC Controller
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: lpc_ich
>>>>>>    Kernel modules: lpc_ich
>>>>>>
>>>>>> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA
>>>> Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
>>>>>>    Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode]
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin B routed to IRQ 19
>>>>>>    Region 0: I/O ports at 40a8 [size=8]
>>>>>>    Region 1: I/O ports at 40b4 [size=4]
>>>>>>    Region 2: I/O ports at 40a0 [size=8]
>>>>>>    Region 3: I/O ports at 40b0 [size=4]
>>>>>>    Region 4: I/O ports at 4060 [size=32]
>>>>>>    Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: ahci
>>>>>>    Kernel modules: ahci
>>>>>>
>>>>>> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller
>>>> (rev 03)
>>>>>>    Subsystem: Lenovo Wildcat Point-LP SMBus Controller
>>>>>>    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Interrupt: pin C routed to IRQ 10
>>>>>>    Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256]
>>>>>>    Region 4: I/O ports at efa0 [size=32]
>>>>>>    Kernel modules: i2c_i801
>>>>>>
>>>>>> 00:1f.6 Signal processing controller: Intel Corporation Wildcat
>>>> Point-LP Thermal Management Controller (rev 03)
>>>>>>    Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0
>>>>>>    Interrupt: pin C routed to IRQ 18
>>>>>>    Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: intel_pch_thermal
>>>>>>    Kernel modules: intel_pch_thermal
>>>>>>
>>>>>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd.
>>>> RTS5227 PCI Express Card Reader (rev 01)
>>>>>>    Subsystem: Lenovo RTS5227 PCI Express Card Reader
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin A routed to IRQ 44
>>>>>>    Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: rtsx_pci
>>>>>>    Kernel modules: rtsx_pci
>>>>>>
>>>>>> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99)
>>>>>>    Subsystem: Intel Corporation Dual Band Wireless-AC 7265
>>>>>>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin A routed to IRQ 48
>>>>>>    Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: iwlwifi
>>>>>>    Kernel modules: iwlwifi
>>>>>>
>>>>>> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M]
>>>> (rev a2)
>>>>>>    Subsystem: Lenovo GM108GLM [Quadro K620M]
>>>>>>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>>>    Latency: 0, Cache Line Size: 64 bytes
>>>>>>    Interrupt: pin A routed to IRQ 45
>>>>>>    Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
>>>>>>    Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>>>>>>    Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
>>>>>>    Region 5: I/O ports at 3000 [size=128]
>>>>>>    Expansion ROM at <ignored> [disabled]
>>>>>>    Capabilities: <access denied>
>>>>>>    Kernel driver in use: nouveau
>>>>>>    Kernel modules: nvidiafb, nouveau
>>>>>>
>>>>>
>>>>>> dmesg |egrep -i "nouveau|nvidia"
>>>>>> [    1.893467] nouveau: detected PR support, will not use DSM
>>>>>> [    1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2)
>>>>>> [    1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03
>>>>>> [    1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f
>>>> (1d408200)
>>>>>> [    1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3
>>>>>> [    3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
>>>>>> [    3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
>>>>>> [    3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table
>>>> invalid
>>>>>> [    3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0
>>>>>> [    3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel
>>>> table invalid
>>>>>> [    3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer
>>>> copies
>>>>>> [    3.451117] [drm] Initialized nouveau 1.3.1 20120801 for
>>>> 0000:08:00.0 on minor 0
>>>>>> [    8.925115] nouveau 0000:08:00.0: DRM: evicting buffers...
>>>>>> [    8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel
>>>> channels to go idle...
>>>>>> [    8.925283] nouveau 0000:08:00.0: DRM: suspending client object
>>>> trees...
>>>>>> [    8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object
>>>> tree...
>>>>>> [   17.449259]  hid_logitech_hidpp hid_logitech_dj usbhid hid
>>>> crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core
>>>> nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64
>>>> ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd
>>>> syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci
>>>> rtsx_pci e1000e ptp pps_core thermal wmi fjes video button
>>>>>> [   18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object
>>>> tree...
>>>>>> [   18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f
>>>> (1f408200)
>>>>>> [   18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff
>>>> (1d40822c)
>>>>>> [   18.761992] nouveau 0000:08:00.0: DRM: resuming client object
>>>> trees...
>>>>>> [   26.025637] nouveau 0000:08:00.0: DRM: evicting buffers...
>>>>>> [   26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel
>>>> channels to go idle...
>>>>>> [   26.025662] nouveau 0000:08:00.0: DRM: suspending client object
>>>> trees...
>>>>>> [   26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object
>>>> tree...
>>>>>
>>>>>> [    20.874]
>>>>>> X.Org X Server 1.18.4
>>>>>> Release Date: 2016-07-19
>>>>>> [    20.874] X Protocol Version 11, Revision 0
>>>>>> [    20.874] Build Operating System: Linux 3.13.0-95-generic x86_64
>>>> Ubuntu
>>>>>> [    20.874] Current Operating System: Linux dell-smo
>>>> 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016
>>>> x86_64
>>>>>> [    20.874] Kernel command line:
>>>> BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic
>>>> root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro
>>>> cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard
>>>> vt.handoff=7
>>>>>> [    20.874] Build Date: 14 September 2016  03:33:24PM
>>>>>> [    20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support
>>>> please see http://www.ubuntu.com/support)
>>>>>> [    20.874] Current version of pixman: 0.33.6
>>>>>> [    20.874]       Before reporting problems, check http://wiki.x.org
>>>>>>    to make sure that you have the latest version.
>>>>>> [    20.874] Markers: (--) probed, (**) from config file, (==)
>>>> default setting,
>>>>>>    (++) from command line, (!!) notice, (II) informational,
>>>>>>    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>>>>> [    20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18
>>>> 09:21:13 2016
>>>>>> [    20.877] (==) Using system config directory
>>>> "/usr/share/X11/xorg.conf.d"
>>>>>> [    20.881] (==) No Layout section.  Using the first Screen
>>>> section.
>>>>>> [    20.881] (==) No screen section available. Using defaults.
>>>>>> [    20.881] (**) |-->Screen "Default Screen Section" (0)
>>>>>> [    20.881] (**) |   |-->Monitor "<default monitor>"
>>>>>> [    20.882] (==) No monitor specified for screen "Default Screen
>>>> Section".
>>>>>>    Using a default monitor configuration.
>>>>>> [    20.882] (==) Automatically adding devices
>>>>>> [    20.882] (==) Automatically enabling devices
>>>>>> [    20.882] (==) Automatically adding GPU devices
>>>>>> [    20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff
>>>>>> [    20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does
>>>> not exist.
>>>>>> [    20.889]       Entry deleted from font path.
>>>>>> [    20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does
>>>> not exist.
>>>>>> [    20.892]       Entry deleted from font path.
>>>>>> [    20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does
>>>> not exist.
>>>>>> [    20.893]       Entry deleted from font path.
>>>>>> [    20.893] (==) FontPath set to:
>>>>>>    /usr/share/fonts/X11/misc,
>>>>>>    /usr/share/fonts/X11/100dpi/:unscaled,
>>>>>>    /usr/share/fonts/X11/Type1,
>>>>>>    /usr/share/fonts/X11/100dpi,
>>>>>>    built-ins
>>>>>> [    20.893] (==) ModulePath set to
>>>> "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
>>>>>> [    20.893] (II) The server relies on udev to provide the list of
>>>> input devices.
>>>>>>    If no devices become available, reconfigure udev or disable
>>>> AutoAddDevices.
>>>>>> [    20.894] (II) Loader magic: 0x563366d65dc0
>>>>>> [    20.894] (II) Module ABI versions:
>>>>>> [    20.894]       X.Org ANSI C Emulation: 0.4
>>>>>> [    20.894]       X.Org Video Driver: 20.0
>>>>>> [    20.894]       X.Org XInput driver : 22.1
>>>>>> [    20.894]       X.Org Server Extension : 9.0
>>>>>> [    20.895] (++) using VT number 7
>>>>>>
>>>>>> [    20.895] (II) systemd-logind: logind integration requires
>>>> -keeptty and -keeptty was not provided, disabling logind integration
>>>>>> [    20.895] (II) xfree86: Adding drm device (/dev/dri/card1)
>>>>>> [    20.910] (II) xfree86: Adding drm device (/dev/dri/card0)
>>>>>> [    20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @
>>>> 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @
>>>> 0x????????/131072
>>>>>> [    20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @
>>>> 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @
>>>> 0x00003000/128
>>>>>> [    20.912] (II) LoadModule: "glx"
>>>>>> [    20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>>>>>> [    20.980] (II) Module glx: vendor="X.Org Foundation"
>>>>>> [    20.980]       compiled for 1.18.4, module version = 1.0.0
>>>>>> [    20.980]       ABI class: X.Org Server Extension, version 9.0
>>>>>> [    20.980] (==) AIGLX enabled
>>>>>> [    20.980] (==) Matched intel as autoconfigured driver 0
>>>>>> [    20.980] (==) Matched nvidia as autoconfigured driver 1
>>>>>> [    20.980] (==) Matched nouveau as autoconfigured driver 2
>>>>>> [    20.980] (==) Matched intel as autoconfigured driver 3
>>>>>> [    20.980] (==) Matched modesetting as autoconfigured driver 4
>>>>>> [    20.980] (==) Matched fbdev as autoconfigured driver 5
>>>>>> [    20.980] (==) Matched vesa as autoconfigured driver 6
>>>>>> [    20.980] (==) Assigned the driver to the xf86ConfigLayout
>>>>>> [    20.980] (II) LoadModule: "intel"
>>>>>> [    20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
>>>>>> [    20.988] (II) Module intel: vendor="X.Org Foundation"
>>>>>> [    20.988]       compiled for 1.18.4, module version = 2.99.917
>>>>>> [    20.988]       Module class: X.Org Video Driver
>>>>>> [    20.988]       ABI class: X.Org Video Driver, version 20.0
>>>>>> [    20.988] (II) LoadModule: "nvidia"
>>>>>> [    20.991] (WW) Warning, couldn't open module nvidia
>>>>>> [    20.991] (II) UnloadModule: "nvidia"
>>>>>> [    20.991] (II) Unloading nvidia
>>>>>> [    20.991] (EE) Failed to load module "nvidia" (module does not
>>>> exist, 0)
>>>>>> [    20.991] (II) LoadModule: "nouveau"
>>>>>> [    20.991] (II) Loading
>>>> /usr/lib/xorg/modules/drivers/nouveau_drv.so
>>>>>> [    20.994] (II) Module nouveau: vendor="X.Org Foundation"
>>>>>> [    20.994]       compiled for 1.18.3, module version = 1.0.13
>>>>>> [    20.994]       Module class: X.Org Video Driver
>>>>>> [    20.994]       ABI class: X.Org Video Driver, version 20.0
>>>>>> [    20.994] (II) LoadModule: "modesetting"
>>>>>> [    20.994] (II) Loading
>>>> /usr/lib/xorg/modules/drivers/modesetting_drv.so
>>>>>> [    20.995] (II) Module modesetting: vendor="X.Org Foundation"
>>>>>> [    20.995]       compiled for 1.18.4, module version = 1.18.4
>>>>>> [    20.995]       Module class: X.Org Video Driver
>>>>>> [    20.995]       ABI class: X.Org Video Driver, version 20.0
>>>>>> [    20.995] (II) LoadModule: "fbdev"
>>>>>> [    20.995] (WW) Warning, couldn't open module fbdev
>>>>>> [    20.995] (II) UnloadModule: "fbdev"
>>>>>> [    20.995] (II) Unloading fbdev
>>>>>> [    20.995] (EE) Failed to load module "fbdev" (module does not
>>>> exist, 0)
>>>>>> [    20.995] (II) LoadModule: "vesa"
>>>>>> [    20.995] (WW) Warning, couldn't open module vesa
>>>>>> [    20.995] (II) UnloadModule: "vesa"
>>>>>> [    20.995] (II) Unloading vesa
>>>>>> [    20.995] (EE) Failed to load module "vesa" (module does not
>>>> exist, 0)
>>>>>> [    20.995] (==) Matched intel as autoconfigured driver 0
>>>>>> [    20.995] (==) Matched nvidia as autoconfigured driver 1
>>>>>> [    20.995] (==) Matched nouveau as autoconfigured driver 2
>>>>>> [    20.995] (==) Matched intel as autoconfigured driver 3
>>>>>> [    20.995] (==) Matched modesetting as autoconfigured driver 4
>>>>>> [    20.995] (==) Matched fbdev as autoconfigured driver 5
>>>>>> [    20.995] (==) Matched vesa as autoconfigured driver 6
>>>>>> [    20.995] (==) Assigned the driver to the xf86ConfigLayout
>>>>>> [    20.995] (II) LoadModule: "intel"
>>>>>> [    20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
>>>>>> [    20.996] (II) Module intel: vendor="X.Org Foundation"
>>>>>> [    20.996]       compiled for 1.18.4, module version = 2.99.917
>>>>>> [    20.996]       Module class: X.Org Video Driver
>>>>>> [    20.996]       ABI class: X.Org Video Driver, version 20.0
>>>>>> [    20.996] (II) UnloadModule: "intel"
>>>>>> [    20.996] (II) Unloading intel
>>>>>> [    20.996] (II) Failed to load module "intel" (already loaded,
>>>> 22067)
>>>>>> [    20.996] (II) LoadModule: "nvidia"
>>>>>> [    20.996] (WW) Warning, couldn't open module nvidia
>>>>>> [    20.996] (II) UnloadModule: "nvidia"
>>>>>> [    20.996] (II) Unloading nvidia
>>>>>> [    20.996] (EE) Failed to load module "nvidia" (module does not
>>>> exist, 0)
>>>>>> [    20.996] (II) LoadModule: "nouveau"
>>>>>> [    20.996] (II) Loading
>>>> /usr/lib/xorg/modules/drivers/nouveau_drv.so
>>>>>> [    20.996] (II) Module nouveau: vendor="X.Org Foundation"
>>>>>> [    20.996]       compiled for 1.18.3, module version = 1.0.13
>>>>>> [    20.996]       Module class: X.Org Video Driver
>>>>>> [    20.996]       ABI class: X.Org Video Driver, version 20.0
>>>>>> [    20.996] (II) UnloadModule: "nouveau"
>>>>>> [    20.996] (II) Unloading nouveau
>>>>>> [    20.996] (II) Failed to load module "nouveau" (already loaded,
>>>> 0)
>>>>>> [    20.996] (II) LoadModule: "modesetting"
>>>>>> [    20.996] (II) Loading
>>>> /usr/lib/xorg/modules/drivers/modesetting_drv.so
>>>>>> [    20.996] (II) Module modesetting: vendor="X.Org Foundation"
>>>>>> [    20.996]       compiled for 1.18.4, module version = 1.18.4
>>>>>> [    20.996]       Module class: X.Org Video Driver
>>>>>> [    20.996]       ABI class: X.Org Video Driver, version 20.0
>>>>>> [    20.996] (II) UnloadModule: "modesetting"
>>>>>> [    20.996] (II) Unloading modesetting
>>>>>> [    20.996] (II) Failed to load module "modesetting" (already
>>>> loaded, 0)
>>>>>> [    20.996] (II) LoadModule: "fbdev"
>>>>>> [    20.996] (WW) Warning, couldn't open module fbdev
>>>>>> [    20.996] (II) UnloadModule: "fbdev"
>>>>>> [    20.996] (II) Unloading fbdev
>>>>>> [    20.996] (EE) Failed to load module "fbdev" (module does not
>>>> exist, 0)
>>>>>> [    20.996] (II) LoadModule: "vesa"
>>>>>> [    20.997] (WW) Warning, couldn't open module vesa
>>>>>> [    20.997] (II) UnloadModule: "vesa"
>>>>>> [    20.997] (II) Unloading vesa
>>>>>> [    20.997] (EE) Failed to load module "vesa" (module does not
>>>> exist, 0)
>>>>>> [    20.997] (II) intel: Driver for Intel(R) Integrated Graphics
>>>> Chipsets:
>>>>>>    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>>>>>>    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>>>>>>    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35,
>>>> Q33,
>>>>>>    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
>>>>>> [    20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
>>>>>> [    20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics:
>>>> 5100, 6100
>>>>>> [    20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
>>>> 5200, 6200, P6300
>>>>>> [    20.997] (II) NOUVEAU driver
>>>>>> [    20.997] (II) NOUVEAU driver for NVIDIA chipset families :
>>>>>> [    20.997]       RIVA TNT        (NV04)
>>>>>> [    20.997]       RIVA TNT2       (NV05)
>>>>>> [    20.997]       GeForce 256     (NV10)
>>>>>> [    20.997]       GeForce 2       (NV11, NV15)
>>>>>> [    20.997]       GeForce 4MX     (NV17, NV18)
>>>>>> [    20.997]       GeForce 3       (NV20)
>>>>>> [    20.997]       GeForce 4Ti     (NV25, NV28)
>>>>>> [    20.997]       GeForce FX      (NV3x)
>>>>>> [    20.997]       GeForce 6       (NV4x)
>>>>>> [    20.997]       GeForce 7       (G7x)
>>>>>> [    20.997]       GeForce 8       (G8x)
>>>>>> [    20.997]       GeForce GTX 200 (NVA0)
>>>>>> [    20.997]       GeForce GTX 400 (NVC0)
>>>>>> [    20.997] (II) modesetting: Driver for Modesetting Kernel
>>>> Drivers: kms
>>>>>> [    21.020] (II) intel(0): Using Kernel Mode Setting driver: i915,
>>>> version 1.6.0 20160919
>>>>>> [    21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel
>>>> 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrummey at gmail.com>)
>>>>>> [    21.020] (II) intel(0): SNA compiled for use with valgrind
>>>>>> [    21.022] (II) [drm] nouveau interface version: 1.3.1
>>>>>> [    21.022] (EE) Unknown chipset: NV118
>>>>>> [    21.022] (WW) Falling back to old probe method for modesetting
>>>>>> [    21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
>>>> Graphics 5500
>>>>>> [    21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
>>>> sse4.2, avx, avx2; using a maximum of 2 threads
>>>>>> [    21.024] (II) intel(0): Creating default Display subsection in
>>>> Screen section
>>>>>>    "Default Screen Section" for depth/fbbpp 24/32
>>>>>> [    21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>>>>>> [    21.024] (==) intel(0): RGB weight 888
>>>>>> [    21.024] (==) intel(0): Default visual is TrueColor
>>>>>> [    21.024] (II) intel(0): Output eDP1 has no monitor section
>>>>>> [    21.052] (--) intel(0): Found backlight control interface
>>>> intel_backlight (type 'raw') for output eDP1
>>>>>> [    21.052] (II) intel(0): Enabled output eDP1
>>>>>> [    21.052] (II) intel(0): Output DP1 has no monitor section
>>>>>> [    21.052] (II) intel(0): Enabled output DP1
>>>>>> [    21.052] (II) intel(0): Output HDMI1 has no monitor section
>>>>>> [    21.052] (II) intel(0): Enabled output HDMI1
>>>>>> [    21.052] (II) intel(0): Output DP2 has no monitor section
>>>>>> [    21.052] (II) intel(0): Enabled output DP2
>>>>>> [    21.052] (II) intel(0): Output HDMI2 has no monitor section
>>>>>> [    21.052] (II) intel(0): Enabled output HDMI2
>>>>>> [    21.052] (--) intel(0): Using a maximum size of 256x256 for
>>>> hardware cursors
>>>>>> [    21.052] (II) intel(0): Output VIRTUAL1 has no monitor section
>>>>>> [    21.052] (II) intel(0): Enabled output VIRTUAL1
>>>>>> [    21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620
>>>> on pipe 0
>>>>>> [    21.052] (--) intel(0): Output DP1 using initial mode 2560x1440
>>>> on pipe 1
>>>>>> [    21.052] (==) intel(0): TearFree enabled
>>>>>> [    21.052] (==) intel(0): DPI set to (96, 96)
>>>>>> [    21.052] (II) Loading sub module "dri2"
>>>>>> [    21.052] (II) LoadModule: "dri2"
>>>>>> [    21.053] (II) Module "dri2" already built-in
>>>>>> [    21.053] (II) Loading sub module "present"
>>>>>> [    21.053] (II) LoadModule: "present"
>>>>>> [    21.053] (II) Module "present" already built-in
>>>>>> [    21.053] (==) Depth 24 pixmap format is 32 bpp
>>>>>> [    21.058] (II) intel(0): SNA initialized with Broadwell (gen8)
>>>> backend
>>>>>> [    21.058] (==) intel(0): Backing store enabled
>>>>>> [    21.058] (==) intel(0): Silken mouse enabled
>>>>>> [    21.060] (II) intel(0): HW Cursor enabled
>>>>>> [    21.060] (II) intel(0): RandR 1.2 enabled, ignore the following
>>>> RandR disabled message.
>>>>>> [    21.061] (==) intel(0): DPMS enabled
>>>>>> [    21.061] (==) intel(0): Display hotplug detection enabled
>>>>>> [    21.061] (II) intel(0): [DRI2] Setup complete
>>>>>> [    21.061] (II) intel(0): [DRI2]   DRI driver: i965
>>>>>> [    21.061] (II) intel(0): [DRI2]   VDPAU driver: va_gl
>>>>>> [    21.061] (II) intel(0): direct rendering: DRI2 enabled
>>>>>> [    21.061] (II) intel(0): hardware support for Present enabled
>>>>>> [    21.061] (--) RandR disabled
>>>>>> [    21.067] (II) SELinux: Disabled on system
>>>>>> [    21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>>>>>> [    21.115] (II) AIGLX: enabled GLX_ARB_create_context
>>>>>> [    21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile
>>>>>> [    21.115] (II) AIGLX: enabled
>>>> GLX_EXT_create_context_es{,2}_profile
>>>>>> [    21.115] (II) AIGLX: enabled GLX_INTEL_swap_event
>>>>>> [    21.115] (II) AIGLX: enabled GLX_SGI_swap_control and
>>>> GLX_MESA_swap_control
>>>>>> [    21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
>>>>>> [    21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float
>>>>>> [    21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
>>>>>> [    21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by
>>>> buffer objects
>>>>>> [    21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness
>>>>>> [    21.116] (II) AIGLX: Loaded and initialized i965
>>>>>> [    21.116] (II) GLX: Initialized DRI2 GL provider for screen 0
>>>>>> [    21.125] (II) intel(0): switch to mode 2880x1620 at 60.0 on eDP1
>>>> using pipe 0, position (0, 0), rotation normal, reflection none
>>>>>> [    21.126] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1
>>>> using pipe 1, position (0, 0), rotation normal, reflection none
>>>>>> [    21.127] (II) intel(0): Setting screen physical size to 762 x
>>>> 428
>>>>>> [    21.271] (II) config/udev: Adding input device Power Button
>>>> (/dev/input/event3)
>>>>>> [    21.276] (**) Power Button: Applying InputClass "evdev keyboard
>>>> catchall"
>>>>>> [    21.276] (II) LoadModule: "evdev"
>>>>>> [    21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>>>>>> [    21.279] (II) Module evdev: vendor="X.Org Foundation"
>>>>>> [    21.280]       compiled for 1.18.1, module version = 2.10.1
>>>>>> [    21.280]       Module class: X.Org XInput Driver
>>>>>> [    21.280]       ABI class: X.Org XInput driver, version 22.1
>>>>>> [    21.280] (II) Using input driver 'evdev' for 'Power Button'
>>>>>> [    21.280] (**) Power Button: always reports core events
>>>>>> [    21.280] (**) evdev: Power Button: Device: "/dev/input/event3"
>>>>>> [    21.280] (--) evdev: Power Button: Vendor 0 Product 0x1
>>>>>> [    21.280] (--) evdev: Power Button: Found keys
>>>>>> [    21.280] (II) evdev: Power Button: Configuring as keyboard
>>>>>> [    21.280] (**) Option "config_info"
>>>> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
>>>>>> [    21.280] (II) XINPUT: Adding extended input device "Power
>>>> Button" (type: KEYBOARD, id 6)
>>>>>> [    21.280] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.280] (**) Option "xkb_model" "pc105"
>>>>>> [    21.280] (**) Option "xkb_layout" "dk"
>>>>>> [    21.359] (II) config/udev: Adding input device Video Bus
>>>> (/dev/input/event15)
>>>>>> [    21.359] (**) Video Bus: Applying InputClass "evdev keyboard
>>>> catchall"
>>>>>> [    21.359] (II) Using input driver 'evdev' for 'Video Bus'
>>>>>> [    21.359] (**) Video Bus: always reports core events
>>>>>> [    21.359] (**) evdev: Video Bus: Device: "/dev/input/event15"
>>>>>> [    21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6
>>>>>> [    21.359] (--) evdev: Video Bus: Found keys
>>>>>> [    21.359] (II) evdev: Video Bus: Configuring as keyboard
>>>>>> [    21.359] (**) Option "config_info"
>>>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15"
>>>>>> [    21.359] (II) XINPUT: Adding extended input device "Video Bus"
>>>> (type: KEYBOARD, id 7)
>>>>>> [    21.359] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.359] (**) Option "xkb_model" "pc105"
>>>>>> [    21.359] (**) Option "xkb_layout" "dk"
>>>>>> [    21.359] (II) config/udev: Adding input device Video Bus
>>>> (/dev/input/event16)
>>>>>> [    21.359] (**) Video Bus: Applying InputClass "evdev keyboard
>>>> catchall"
>>>>>> [    21.361] (II) Using input driver 'evdev' for 'Video Bus'
>>>>>> [    21.361] (**) Video Bus: always reports core events
>>>>>> [    21.361] (**) evdev: Video Bus: Device: "/dev/input/event16"
>>>>>> [    21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6
>>>>>> [    21.361] (--) evdev: Video Bus: Found keys
>>>>>> [    21.361] (II) evdev: Video Bus: Configuring as keyboard
>>>>>> [    21.361] (**) Option "config_info"
>>>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16"
>>>>>> [    21.361] (II) XINPUT: Adding extended input device "Video Bus"
>>>> (type: KEYBOARD, id 8)
>>>>>> [    21.361] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.361] (**) Option "xkb_model" "pc105"
>>>>>> [    21.361] (**) Option "xkb_layout" "dk"
>>>>>> [    21.362] (II) config/udev: Adding input device Lid Switch
>>>> (/dev/input/event1)
>>>>>> [    21.362] (II) No input driver specified, ignoring this device.
>>>>>> [    21.362] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.362] (II) config/udev: Adding input device Sleep Button
>>>> (/dev/input/event2)
>>>>>> [    21.362] (**) Sleep Button: Applying InputClass "evdev keyboard
>>>> catchall"
>>>>>> [    21.362] (II) Using input driver 'evdev' for 'Sleep Button'
>>>>>> [    21.362] (**) Sleep Button: always reports core events
>>>>>> [    21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2"
>>>>>> [    21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3
>>>>>> [    21.364] (--) evdev: Sleep Button: Found keys
>>>>>> [    21.364] (II) evdev: Sleep Button: Configuring as keyboard
>>>>>> [    21.364] (**) Option "config_info"
>>>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
>>>>>> [    21.364] (II) XINPUT: Adding extended input device "Sleep
>>>> Button" (type: KEYBOARD, id 9)
>>>>>> [    21.364] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.364] (**) Option "xkb_model" "pc105"
>>>>>> [    21.364] (**) Option "xkb_layout" "dk"
>>>>>> [    21.365] (II) config/udev: Adding input device HDA Intel HDMI
>>>> HDMI/DP,pcm=3 (/dev/input/event18)
>>>>>> [    21.365] (II) No input driver specified, ignoring this device.
>>>>>> [    21.365] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.365] (II) config/udev: Adding input device HDA Intel HDMI
>>>> HDMI/DP,pcm=7 (/dev/input/event19)
>>>>>> [    21.365] (II) No input driver specified, ignoring this device.
>>>>>> [    21.365] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.365] (II) config/udev: Adding input device HDA Intel HDMI
>>>> HDMI/DP,pcm=8 (/dev/input/event20)
>>>>>> [    21.365] (II) No input driver specified, ignoring this device.
>>>>>> [    21.365] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.366] (II) config/udev: Adding input device Logitech M705
>>>> (/dev/input/event4)
>>>>>> [    21.366] (**) Logitech M705: Applying InputClass "evdev pointer
>>>> catchall"
>>>>>> [    21.366] (II) Using input driver 'evdev' for 'Logitech M705'
>>>>>> [    21.366] (**) Logitech M705: always reports core events
>>>>>> [    21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4"
>>>>>> [    21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b
>>>>>> [    21.366] (--) evdev: Logitech M705: Found 20 mouse buttons
>>>>>> [    21.366] (--) evdev: Logitech M705: Found scroll wheel(s)
>>>>>> [    21.366] (--) evdev: Logitech M705: Found relative axes
>>>>>> [    21.366] (--) evdev: Logitech M705: Found x and y relative axes
>>>>>> [    21.366] (II) evdev: Logitech M705: Configuring as mouse
>>>>>> [    21.366] (II) evdev: Logitech M705: Adding scrollwheel support
>>>>>> [    21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and
>>>> 5
>>>>>> [    21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4,
>>>> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>>>>>> [    21.366] (**) Option "config_info"
>>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4"
>>>>>> [    21.366] (II) XINPUT: Adding extended input device "Logitech
>>>> M705" (type: MOUSE, id 10)
>>>>>> [    21.366] (II) evdev: Logitech M705: initialized for relative
>>>> axes.
>>>>>> [    21.366] (**) Logitech M705: (accel) keeping acceleration scheme
>>>> 1
>>>>>> [    21.366] (**) Logitech M705: (accel) acceleration profile 0
>>>>>> [    21.366] (**) Logitech M705: (accel) acceleration factor: 2.000
>>>>>> [    21.366] (**) Logitech M705: (accel) acceleration threshold: 4
>>>>>> [    21.367] (II) config/udev: Adding input device Logitech M705
>>>> (/dev/input/mouse0)
>>>>>> [    21.367] (II) No input driver specified, ignoring this device.
>>>>>> [    21.367] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.367] (II) config/udev: Adding input device Lite-On
>>>> Technology USB Productivity Option Keyboard( has the hub in # 1 )
>>>> (/dev/input/event6)
>>>>>> [    21.367] (**) Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard
>>>> catchall"
>>>>>> [    21.367] (II) Using input driver 'evdev' for 'Lite-On Technology
>>>> USB Productivity Option Keyboard( has the hub in # 1 )'
>>>>>> [    21.367] (**) Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): always reports core events
>>>>>> [    21.367] (**) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Device: "/dev/input/event6"
>>>>>> [    21.367] (--) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
>>>>>> [    21.367] (--) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Found keys
>>>>>> [    21.367] (II) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Configuring as keyboard
>>>>>> [    21.367] (**) Option "config_info"
>>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6"
>>>>>> [    21.367] (II) XINPUT: Adding extended input device "Lite-On
>>>> Technology USB Productivity Option Keyboard( has the hub in # 1 )"
>>>> (type: KEYBOARD, id 11)
>>>>>> [    21.367] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.367] (**) Option "xkb_model" "pc105"
>>>>>> [    21.367] (**) Option "xkb_layout" "dk"
>>>>>> [    21.368] (II) config/udev: Adding input device Lite-On
>>>> Technology USB Productivity Option Keyboard( has the hub in # 1 )
>>>> (/dev/input/event7)
>>>>>> [    21.368] (**) Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard
>>>> catchall"
>>>>>> [    21.368] (II) Using input driver 'evdev' for 'Lite-On Technology
>>>> USB Productivity Option Keyboard( has the hub in # 1 )'
>>>>>> [    21.368] (**) Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): always reports core events
>>>>>> [    21.368] (**) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Device: "/dev/input/event7"
>>>>>> [    21.368] (--) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
>>>>>> [    21.368] (--) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Found keys
>>>>>> [    21.368] (II) evdev: Lite-On Technology USB Productivity Option
>>>> Keyboard( has the hub in # 1 ): Configuring as keyboard
>>>>>> [    21.368] (**) Option "config_info"
>>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7"
>>>>>> [    21.368] (II) XINPUT: Adding extended input device "Lite-On
>>>> Technology USB Productivity Option Keyboard( has the hub in # 1 )"
>>>> (type: KEYBOARD, id 12)
>>>>>> [    21.368] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.368] (**) Option "xkb_model" "pc105"
>>>>>> [    21.368] (**) Option "xkb_layout" "dk"
>>>>>> [    21.369] (II) config/udev: Adding input device Integrated Camera
>>>> (/dev/input/event17)
>>>>>> [    21.369] (**) Integrated Camera: Applying InputClass "evdev
>>>> keyboard catchall"
>>>>>> [    21.369] (II) Using input driver 'evdev' for 'Integrated Camera'
>>>>>> [    21.369] (**) Integrated Camera: always reports core events
>>>>>> [    21.369] (**) evdev: Integrated Camera: Device:
>>>> "/dev/input/event17"
>>>>>> [    21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product
>>>> 0x366
>>>>>> [    21.369] (--) evdev: Integrated Camera: Found keys
>>>>>> [    21.369] (II) evdev: Integrated Camera: Configuring as keyboard
>>>>>> [    21.369] (**) Option "config_info"
>>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17"
>>>>>> [    21.369] (II) XINPUT: Adding extended input device "Integrated
>>>> Camera" (type: KEYBOARD, id 13)
>>>>>> [    21.369] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.369] (**) Option "xkb_model" "pc105"
>>>>>> [    21.369] (**) Option "xkb_layout" "dk"
>>>>>> [    21.370] (II) config/udev: Adding input device HDA Digital
>>>> PCBeep (/dev/input/event10)
>>>>>> [    21.370] (II) No input driver specified, ignoring this device.
>>>>>> [    21.370] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.370] (II) config/udev: Adding input device HDA Intel PCH
>>>> Dock Mic (/dev/input/event11)
>>>>>> [    21.370] (II) No input driver specified, ignoring this device.
>>>>>> [    21.370] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.370] (II) config/udev: Adding input device HDA Intel PCH Mic
>>>> (/dev/input/event12)
>>>>>> [    21.370] (II) No input driver specified, ignoring this device.
>>>>>> [    21.370] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.370] (II) config/udev: Adding input device HDA Intel PCH
>>>> Dock Headphone (/dev/input/event13)
>>>>>> [    21.370] (II) No input driver specified, ignoring this device.
>>>>>> [    21.370] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.375] (II) config/udev: Adding input device HDA Intel PCH
>>>> Headphone (/dev/input/event14)
>>>>>> [    21.375] (II) No input driver specified, ignoring this device.
>>>>>> [    21.375] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.375] (II) config/udev: Adding input device AT Translated Set
>>>> 2 keyboard (/dev/input/event0)
>>>>>> [    21.375] (**) AT Translated Set 2 keyboard: Applying InputClass
>>>> "evdev keyboard catchall"
>>>>>> [    21.375] (II) Using input driver 'evdev' for 'AT Translated Set
>>>> 2 keyboard'
>>>>>> [    21.375] (**) AT Translated Set 2 keyboard: always reports core
>>>> events
>>>>>> [    21.375] (**) evdev: AT Translated Set 2 keyboard: Device:
>>>> "/dev/input/event0"
>>>>>> [    21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1
>>>> Product 0x1
>>>>>> [    21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys
>>>>>> [    21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring
>>>> as keyboard
>>>>>> [    21.375] (**) Option "config_info"
>>>> "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
>>>>>> [    21.375] (II) XINPUT: Adding extended input device "AT
>>>> Translated Set 2 keyboard" (type: KEYBOARD, id 14)
>>>>>> [    21.375] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.375] (**) Option "xkb_model" "pc105"
>>>>>> [    21.375] (**) Option "xkb_layout" "dk"
>>>>>> [    21.376] (II) config/udev: Adding input device SynPS/2 Synaptics
>>>> TouchPad (/dev/input/event5)
>>>>>> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
>>>> "evdev touchpad catchall"
>>>>>> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
>>>> "evdev touchscreen catchall"
>>>>>> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
>>>> "touchpad catchall"
>>>>>> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
>>>> "Default clickpad buttons"
>>>>>> [    21.376] (II) LoadModule: "synaptics"
>>>>>> [    21.376] (II) Loading
>>>> /usr/lib/xorg/modules/input/synaptics_drv.so
>>>>>> [    21.381] (II) Module synaptics: vendor="X.Org Foundation"
>>>>>> [    21.381]       compiled for 1.18.1, module version = 1.8.2
>>>>>> [    21.381]       Module class: X.Org XInput Driver
>>>>>> [    21.381]       ABI class: X.Org XInput driver, version 22.1
>>>>>> [    21.381] (II) Using input driver 'synaptics' for 'SynPS/2
>>>> Synaptics TouchPad'
>>>>>> [    21.381] (**) SynPS/2 Synaptics TouchPad: always reports core
>>>> events
>>>>>> [    21.381] (**) Option "Device" "/dev/input/event5"
>>>>>> [    21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found
>>>> clickpad property
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis
>>>> range 1266 - 5676 (res 45)
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis
>>>> range 1096 - 4758 (res 68)
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure
>>>> range 0 - 255
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger
>>>> width range 0 - 15
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons:
>>>> left double triple
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2
>>>> Product 0x7
>>>>>> [    21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
>>>>>> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad
>>>> found
>>>>>> [    21.464] (**) SynPS/2 Synaptics TouchPad: always reports core
>>>> events
>>>>>> [    21.500] (**) Option "config_info"
>>>> "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
>>>>>> [    21.500] (II) XINPUT: Adding extended input device "SynPS/2
>>>> Synaptics TouchPad" (type: TOUCHPAD, id 15)
>>>>>> [    21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
>>>> MinSpeed is now constant deceleration 2.5
>>>>>> [    21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
>>>> MaxSpeed is now 1.75
>>>>>> [    21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
>>>> AccelFactor is now 0.035
>>>>>> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping
>>>> acceleration scheme 1
>>>>>> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
>>>> profile 1
>>>>>> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
>>>> factor: 2.000
>>>>>> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
>>>> threshold: 4
>>>>>> [    21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad
>>>> found
>>>>>> [    21.500] (II) config/udev: Adding input device SynPS/2 Synaptics
>>>> TouchPad (/dev/input/mouse1)
>>>>>> [    21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from
>>>> InputClass "touchpad ignore duplicates"
>>>>>> [    21.501] (II) config/udev: Adding input device TPPS/2 IBM
>>>> TrackPoint (/dev/input/event8)
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev
>>>> pointer catchall"
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass
>>>> "trackpoint catchall"
>>>>>> [    21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM
>>>> TrackPoint'
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: always reports core events
>>>>>> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device:
>>>> "/dev/input/event8"
>>>>>> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product
>>>> 0xa
>>>>>> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse
>>>> buttons
>>>>>> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
>>>>>> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y
>>>> relative axes
>>>>>> [    21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
>>>>>> [    21.501] (**) Option "Emulate3Buttons" "true"
>>>>>> [    21.501] (**) Option "EmulateWheel" "true"
>>>>>> [    21.501] (**) Option "EmulateWheelButton" "2"
>>>>>> [    21.501] (**) Option "YAxisMapping" "4 5"
>>>>>> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping:
>>>> buttons 4 and 5
>>>>>> [    21.501] (**) Option "XAxisMapping" "6 7"
>>>>>> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping:
>>>> buttons 6 and 7
>>>>>> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton:
>>>> 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>>>>>> [    21.501] (**) Option "config_info"
>>>> "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
>>>>>> [    21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM
>>>> TrackPoint" (type: MOUSE, id 16)
>>>>>> [    21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for
>>>> relative axes.
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping
>>>> acceleration scheme 1
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration
>>>> profile 0
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration
>>>> factor: 2.000
>>>>>> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration
>>>> threshold: 4
>>>>>> [    21.501] (II) config/udev: Adding input device TPPS/2 IBM
>>>> TrackPoint (/dev/input/mouse2)
>>>>>> [    21.501] (II) No input driver specified, ignoring this device.
>>>>>> [    21.501] (II) This device may have been added with another
>>>> device file.
>>>>>> [    21.502] (II) config/udev: Adding input device ThinkPad Extra
>>>> Buttons (/dev/input/event9)
>>>>>> [    21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev
>>>> keyboard catchall"
>>>>>> [    21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra
>>>> Buttons'
>>>>>> [    21.502] (**) ThinkPad Extra Buttons: always reports core events
>>>>>> [    21.502] (**) evdev: ThinkPad Extra Buttons: Device:
>>>> "/dev/input/event9"
>>>>>> [    21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa
>>>> Product 0x5054
>>>>>> [    21.502] (--) evdev: ThinkPad Extra Buttons: Found keys
>>>>>> [    21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as
>>>> keyboard
>>>>>> [    21.502] (**) Option "config_info"
>>>> "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
>>>>>> [    21.502] (II) XINPUT: Adding extended input device "ThinkPad
>>>> Extra Buttons" (type: KEYBOARD, id 17)
>>>>>> [    21.502] (**) Option "xkb_rules" "evdev"
>>>>>> [    21.502] (**) Option "xkb_model" "pc105"
>>>>>> [    21.502] (**) Option "xkb_layout" "dk"
>>>>>> [    23.053] (II) intel(0): EDID vendor "MEI", prod id 38562
>>>>>> [    23.053] (II) intel(0):     EDID quirk: Use maximum size instead
>>>> of detailed timing sizes.
>>>>>> [    23.053] (II) intel(0): Using EDID range info for horizontal
>>>> sync
>>>>>> [    23.053] (II) intel(0): Using EDID range info for vertical
>>>> refresh
>>>>>> [    23.053] (II) intel(0): Printing DDC gathered Modelines:
>>>>>> [    23.053] (II) intel(0): Modeline "2880x1620"x0.0  302.50  2880
>>>> 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
>>>>>> [    23.053] (II) intel(0): Modeline "2880x1620"x0.0  302.50  2880
>>>> 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
>>>>>> [    23.909] (II) intel(0): resizing framebuffer to 5440x1620
>>>>>> [    23.960] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1
>>>> using pipe 1, position (2880, 0), rotation normal, reflection none
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> _______________________________________________
>>>>>> Nouveau mailing list
>>>>>> Nouveau at lists.freedesktop.org
>>>>>> https://lists.freedesktop.org/mailman/listinfo/nouveau
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Nouveau mailing list
>>>> Nouveau at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/nouveau
>>>
>>



More information about the Nouveau mailing list