[Nouveau] [PATCH v4 7/8] drm/nouveau: Fix deadlocks in nouveau_connector_detect()
Daniel Vetter
daniel at ffwll.ch
Mon Aug 6 09:15:17 UTC 2018
On Wed, Aug 01, 2018 at 05:14:57PM -0400, Lyude Paul wrote:
> When we disable hotplugging on the GPU, we need to be able to
> synchronize with each connector's hotplug interrupt handler before the
> interrupt is finally disabled. This can be a problem however, since
> nouveau_connector_detect() currently grabs a runtime power reference
> when handling connector probing. This will deadlock the runtime suspend
> handler like so:
>
> [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds.
> [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 861.486332] kworker/0:2 D 0 61 2 0x80000000
> [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau]
> [ 861.487737] Call Trace:
> [ 861.488394] __schedule+0x322/0xaf0
> [ 861.489070] schedule+0x33/0x90
> [ 861.489744] rpm_resume+0x19c/0x850
> [ 861.490392] ? finish_wait+0x90/0x90
> [ 861.491068] __pm_runtime_resume+0x4e/0x90
> [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau]
> [ 861.492416] process_one_work+0x231/0x620
> [ 861.493068] worker_thread+0x44/0x3a0
> [ 861.493722] kthread+0x12b/0x150
> [ 861.494342] ? wq_pool_ids_show+0x140/0x140
> [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70
> [ 861.495648] ret_from_fork+0x3a/0x50
> [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds.
> [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 861.498341] kworker/6:2 D 0 320 2 0x80000080
> [ 861.499045] Workqueue: pm pm_runtime_work
> [ 861.499739] Call Trace:
> [ 861.500428] __schedule+0x322/0xaf0
> [ 861.501134] ? wait_for_completion+0x104/0x190
> [ 861.501851] schedule+0x33/0x90
> [ 861.502564] schedule_timeout+0x3a5/0x590
> [ 861.503284] ? mark_held_locks+0x58/0x80
> [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40
> [ 861.504710] ? wait_for_completion+0x104/0x190
> [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190
> [ 861.506136] ? wait_for_completion+0x104/0x190
> [ 861.506845] wait_for_completion+0x12c/0x190
> [ 861.507555] ? wake_up_q+0x80/0x80
> [ 861.508268] flush_work+0x1c9/0x280
> [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0
> [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau]
> [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau]
> [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau]
> [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau]
> [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau]
> [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180
> [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70
> [ 861.514897] __rpm_callback+0x7a/0x1d0
> [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70
> [ 861.516313] rpm_callback+0x24/0x80
> [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70
> [ 861.517741] rpm_suspend+0x142/0x6b0
> [ 861.518449] pm_runtime_work+0x97/0xc0
> [ 861.519144] process_one_work+0x231/0x620
> [ 861.519831] worker_thread+0x44/0x3a0
> [ 861.520522] kthread+0x12b/0x150
> [ 861.521220] ? wq_pool_ids_show+0x140/0x140
> [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70
> [ 861.522622] ret_from_fork+0x3a/0x50
> [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds.
> [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000
> [ 861.526073] Workqueue: events nvif_notify_work [nouveau]
> [ 861.526751] Call Trace:
> [ 861.527411] __schedule+0x322/0xaf0
> [ 861.528089] schedule+0x33/0x90
> [ 861.528758] rpm_resume+0x19c/0x850
> [ 861.529399] ? finish_wait+0x90/0x90
> [ 861.530073] __pm_runtime_resume+0x4e/0x90
> [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau]
> [ 861.531459] ? ww_mutex_lock+0x47/0x80
> [ 861.532097] ? ww_mutex_lock+0x47/0x80
> [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm]
> [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper]
> [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper]
> [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau]
> [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau]
> [ 861.536221] process_one_work+0x231/0x620
> [ 861.536994] worker_thread+0x44/0x3a0
> [ 861.537757] kthread+0x12b/0x150
> [ 861.538463] ? wq_pool_ids_show+0x140/0x140
> [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70
> [ 861.539815] ret_from_fork+0x3a/0x50
> [ 861.540521]
> Showing all locks held in the system:
> [ 861.541696] 2 locks held by kworker/0:2/61:
> [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
> [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620
> [ 861.543814] 1 lock held by khungtaskd/64:
> [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185
> [ 861.545160] 3 locks held by kworker/6:2/320:
> [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620
> [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620
> [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau]
> [ 861.548146] 1 lock held by dmesg/983:
> [ 861.548889] 2 locks held by zsh/1250:
> [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40
> [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870
> [ 861.551122] 6 locks held by kworker/6:0/1329:
> [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
> [ 861.552765] #1: 00000000ddb499ad ((work_completion)(¬ify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620
> [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper]
> [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper]
> [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper]
> [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm]
>
> [ 861.557864] =============================================
>
> [ 861.559507] NMI backtrace for cpu 2
> [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018
> [ 861.561948] Call Trace:
> [ 861.562757] dump_stack+0x8e/0xd3
> [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a
> [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42
> [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae
> [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20
> [ 861.566558] watchdog+0x316/0x580
> [ 861.567355] kthread+0x12b/0x150
> [ 861.568114] ? reset_hung_task_detector+0x20/0x20
> [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70
> [ 861.569598] ret_from_fork+0x3a/0x50
> [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7:
> [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120
> [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120
> [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120
> [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120
> [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120
> [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120
> [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120
> [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks
>
> So: fix this with a new trick; store the current task_struct that's
> executing in the nouveau_connector structure, then avoid attempting to
> runtime resume the device when we know that we're just running from the
> context of our hotplug interrupt handler. Since hpd interrupts are only
> enabled while the device is runtime active, this should be totally safe.
>
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> Cc: stable at vger.kernel.org
> Cc: Lukas Wunner <lukas at wunner.de>
> Cc: Karol Herbst <karolherbst at gmail.com>
> ---
> drivers/gpu/drm/nouveau/nouveau_connector.c | 16 ++++++++++------
> drivers/gpu/drm/nouveau/nouveau_connector.h | 1 +
> 2 files changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
> index 9714e09f17db..8409c3f2c3a1 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_connector.c
> +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
> @@ -572,13 +572,14 @@ nouveau_connector_detect(struct drm_connector *connector, bool force)
> nv_connector->edid = NULL;
> }
>
> - /* Outputs are only polled while runtime active, so resuming the
> - * device here is unnecessary (and would deadlock upon runtime suspend
> - * because it waits for polling to finish). We do however, want to
> - * prevent the autosuspend timer from elapsing during this operation
> - * if possible.
> + /* Output polling and HPD only happens while we're runtime active, so
> + * resuming the device here is unnecessary (and would deadlock upon
> + * runtime suspend because it waits for polling to finish). We do
> + * however, want to prevent the autosuspend timer from elapsing during
> + * this operation if possible.
> */
> - if (drm_kms_helper_is_poll_worker()) {
> + if (drm_kms_helper_is_poll_worker() ||
Uh, this entirely slipped through my rader. Looks very much like a hack.
If you want to avoid doing runtime pm from the poll worker imo the right
thing to do would be to use pm_runtime_get_if_in_use() and skip the entire
detection (returning the current state) if you can't get a runtime pm
reference. You could also use the force parameter to figure out whether
userspace is asking for this information or not.
Otoh it's a bit nasty to stop the polling (if the hw really requires it)
just because the display is suspended, makes waking up the machine just a
notch more annoying. E.g. in i915 we keep polling (and use some ACPI
methods if available for hpd detection, to waste less power on rpm
wakeups).
-Daniel
> + nv_connector->hpd_task == current) {
> pm_runtime_get_noresume(dev->dev);
> } else {
> ret = pm_runtime_get_sync(dev->dev);
> @@ -1151,6 +1152,8 @@ nouveau_connector_hotplug(struct nvif_notify *notify)
> const char *name = connector->name;
> struct nouveau_encoder *nv_encoder;
>
> + nv_connector->hpd_task = current;
> +
> if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) {
> NV_DEBUG(drm, "service %s\n", name);
> if ((nv_encoder = find_encoder(connector, DCB_OUTPUT_DP)))
> @@ -1167,6 +1170,7 @@ nouveau_connector_hotplug(struct nvif_notify *notify)
> nouveau_connector_hotplug_probe(nv_connector);
> }
>
> + nv_connector->hpd_task = NULL;
> return NVIF_NOTIFY_KEEP;
> }
>
> diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h
> index 2d9d35a146a4..1964e682ba13 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_connector.h
> +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
> @@ -45,6 +45,7 @@ struct nouveau_connector {
> u8 *dcb;
>
> struct nvif_notify hpd;
> + struct task_struct *hpd_task;
>
> struct drm_dp_aux aux;
>
> --
> 2.17.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Nouveau
mailing list