[Nouveau] [PATCH v4 7/8] drm/nouveau: Fix deadlocks in nouveau_connector_detect()
Lyude Paul
lyude at redhat.com
Mon Aug 6 19:29:04 UTC 2018
On Mon, 2018-08-06 at 11:15 +0200, Daniel Vetter wrote:
> On Wed, Aug 01, 2018 at 05:14:57PM -0400, Lyude Paul wrote:
> > When we disable hotplugging on the GPU, we need to be able to
> > synchronize with each connector's hotplug interrupt handler before the
> > interrupt is finally disabled. This can be a problem however, since
> > nouveau_connector_detect() currently grabs a runtime power reference
> > when handling connector probing. This will deadlock the runtime suspend
> > handler like so:
> >
> > [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120
> > seconds.
> > [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> > [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
> > this message.
> > [ 861.486332] kworker/0:2 D 0 61 2 0x80000000
> > [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau]
> > [ 861.487737] Call Trace:
> > [ 861.488394] __schedule+0x322/0xaf0
> > [ 861.489070] schedule+0x33/0x90
> > [ 861.489744] rpm_resume+0x19c/0x850
> > [ 861.490392] ? finish_wait+0x90/0x90
> > [ 861.491068] __pm_runtime_resume+0x4e/0x90
> > [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau]
> > [ 861.492416] process_one_work+0x231/0x620
> > [ 861.493068] worker_thread+0x44/0x3a0
> > [ 861.493722] kthread+0x12b/0x150
> > [ 861.494342] ? wq_pool_ids_show+0x140/0x140
> > [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70
> > [ 861.495648] ret_from_fork+0x3a/0x50
> > [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120
> > seconds.
> > [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> > [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
> > this message.
> > [ 861.498341] kworker/6:2 D 0 320 2 0x80000080
> > [ 861.499045] Workqueue: pm pm_runtime_work
> > [ 861.499739] Call Trace:
> > [ 861.500428] __schedule+0x322/0xaf0
> > [ 861.501134] ? wait_for_completion+0x104/0x190
> > [ 861.501851] schedule+0x33/0x90
> > [ 861.502564] schedule_timeout+0x3a5/0x590
> > [ 861.503284] ? mark_held_locks+0x58/0x80
> > [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40
> > [ 861.504710] ? wait_for_completion+0x104/0x190
> > [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190
> > [ 861.506136] ? wait_for_completion+0x104/0x190
> > [ 861.506845] wait_for_completion+0x12c/0x190
> > [ 861.507555] ? wake_up_q+0x80/0x80
> > [ 861.508268] flush_work+0x1c9/0x280
> > [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0
> > [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau]
> > [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau]
> > [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau]
> > [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau]
> > [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau]
> > [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180
> > [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70
> > [ 861.514897] __rpm_callback+0x7a/0x1d0
> > [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70
> > [ 861.516313] rpm_callback+0x24/0x80
> > [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70
> > [ 861.517741] rpm_suspend+0x142/0x6b0
> > [ 861.518449] pm_runtime_work+0x97/0xc0
> > [ 861.519144] process_one_work+0x231/0x620
> > [ 861.519831] worker_thread+0x44/0x3a0
> > [ 861.520522] kthread+0x12b/0x150
> > [ 861.521220] ? wq_pool_ids_show+0x140/0x140
> > [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70
> > [ 861.522622] ret_from_fork+0x3a/0x50
> > [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120
> > seconds.
> > [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
> > [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
> > this message.
> > [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000
> > [ 861.526073] Workqueue: events nvif_notify_work [nouveau]
> > [ 861.526751] Call Trace:
> > [ 861.527411] __schedule+0x322/0xaf0
> > [ 861.528089] schedule+0x33/0x90
> > [ 861.528758] rpm_resume+0x19c/0x850
> > [ 861.529399] ? finish_wait+0x90/0x90
> > [ 861.530073] __pm_runtime_resume+0x4e/0x90
> > [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau]
> > [ 861.531459] ? ww_mutex_lock+0x47/0x80
> > [ 861.532097] ? ww_mutex_lock+0x47/0x80
> > [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm]
> > [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper]
> > [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper]
> > [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau]
> > [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau]
> > [ 861.536221] process_one_work+0x231/0x620
> > [ 861.536994] worker_thread+0x44/0x3a0
> > [ 861.537757] kthread+0x12b/0x150
> > [ 861.538463] ? wq_pool_ids_show+0x140/0x140
> > [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70
> > [ 861.539815] ret_from_fork+0x3a/0x50
> > [ 861.540521]
> > Showing all locks held in the system:
> > [ 861.541696] 2 locks held by kworker/0:2/61:
> > [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at:
> > process_one_work+0x1b3/0x620
> > [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm-
> > >hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620
> > [ 861.543814] 1 lock held by khungtaskd/64:
> > [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at:
> > debug_show_all_locks+0x23/0x185
> > [ 861.545160] 3 locks held by kworker/6:2/320:
> > [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at:
> > process_one_work+0x1b3/0x620
> > [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev-
> > >power.work)){+.+.}, at: process_one_work+0x1b3/0x620
> > [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at:
> > nouveau_display_fini+0x96/0x170 [nouveau]
> > [ 861.548146] 1 lock held by dmesg/983:
> > [ 861.548889] 2 locks held by zsh/1250:
> > [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at:
> > ldsem_down_read+0x37/0x40
> > [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at:
> > n_tty_read+0xc1/0x870
> > [ 861.551122] 6 locks held by kworker/6:0/1329:
> > [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at:
> > process_one_work+0x1b3/0x620
> > [ 861.552765] #1: 00000000ddb499ad ((work_completion)(¬ify-
> > >work)#2){+.+.}, at: process_one_work+0x1b3/0x620
> > [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at:
> > drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper]
> > [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at:
> > drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper]
> > [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at:
> > drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper]
> > [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at:
> > drm_modeset_lock+0x4b/0x130 [drm]
> >
> > [ 861.557864] =============================================
> >
> > [ 861.559507] NMI backtrace for cpu 2
> > [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted:
> > G O 4.18.0-rc6Lyude-Test+ #1
> > [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W
> > (1.51 ) 05/18/2018
> > [ 861.561948] Call Trace:
> > [ 861.562757] dump_stack+0x8e/0xd3
> > [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a
> > [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42
> > [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae
> > [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20
> > [ 861.566558] watchdog+0x316/0x580
> > [ 861.567355] kthread+0x12b/0x150
> > [ 861.568114] ? reset_hung_task_detector+0x20/0x20
> > [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70
> > [ 861.569598] ret_from_fork+0x3a/0x50
> > [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7:
> > [ 861.571426] NMI backtrace for cpu 6 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.571429] NMI backtrace for cpu 7 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.571432] NMI backtrace for cpu 3 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.571464] NMI backtrace for cpu 5 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.571467] NMI backtrace for cpu 0 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.571469] NMI backtrace for cpu 4 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.571472] NMI backtrace for cpu 1 skipped: idling at
> > intel_idle+0x7f/0x120
> > [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks
> >
> > So: fix this with a new trick; store the current task_struct that's
> > executing in the nouveau_connector structure, then avoid attempting to
> > runtime resume the device when we know that we're just running from the
> > context of our hotplug interrupt handler. Since hpd interrupts are only
> > enabled while the device is runtime active, this should be totally safe.
> >
> > Signed-off-by: Lyude Paul <lyude at redhat.com>
> > Cc: stable at vger.kernel.org
> > Cc: Lukas Wunner <lukas at wunner.de>
> > Cc: Karol Herbst <karolherbst at gmail.com>
> > ---
> > drivers/gpu/drm/nouveau/nouveau_connector.c | 16 ++++++++++------
> > drivers/gpu/drm/nouveau/nouveau_connector.h | 1 +
> > 2 files changed, 11 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c
> > b/drivers/gpu/drm/nouveau/nouveau_connector.c
> > index 9714e09f17db..8409c3f2c3a1 100644
> > --- a/drivers/gpu/drm/nouveau/nouveau_connector.c
> > +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
> > @@ -572,13 +572,14 @@ nouveau_connector_detect(struct drm_connector
> > *connector, bool force)
> > nv_connector->edid = NULL;
> > }
> >
> > - /* Outputs are only polled while runtime active, so resuming the
> > - * device here is unnecessary (and would deadlock upon runtime suspend
> > - * because it waits for polling to finish). We do however, want to
> > - * prevent the autosuspend timer from elapsing during this operation
> > - * if possible.
> > + /* Output polling and HPD only happens while we're runtime active, so
> > + * resuming the device here is unnecessary (and would deadlock upon
> > + * runtime suspend because it waits for polling to finish). We do
> > + * however, want to prevent the autosuspend timer from elapsing during
> > + * this operation if possible.
> > */
> > - if (drm_kms_helper_is_poll_worker()) {
> > + if (drm_kms_helper_is_poll_worker() ||
>
> Uh, this entirely slipped through my rader. Looks very much like a hack.
> If you want to avoid doing runtime pm from the poll worker imo the right
> thing to do would be to use pm_runtime_get_if_in_use() and skip the entire
> detection (returning the current state) if you can't get a runtime pm
> reference. You could also use the force parameter to figure out whether
> userspace is asking for this information or not.
nope! While you're definitely right that we should actually avoid disabling
output polling during runtime suspend (see my response to your response on
patch 3), this part is still needed and also matches what i915 currently does
in it's irq handlers (see: all the disable_rpm_wakeref_asserts() calls in
i915_hpd.c). pm_runtime_get_if_in_use() won't work because (taken from
Documentation/power/runtime_pm.txt):
int pm_runtime_get_if_in_use(struct device *dev);
- return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
runtime PM status is RPM_ACTIVE and the runtime PM usage counter is
nonzero, increment the counter and return 1; otherwise return 0 without
changing the counter
Which means if the usage count is non-zero (e.g. all points where the GPU is
awake but isn't in use and is waiting for the autosuspend delay to timeout),
we'll just avoid connector detection entirely without at least having a screen
active or some other kind of activity that grabs a runtime power reference.
Additionally: nouveau_connector_detect() is what sees whether or not the
connector status has changed in order to determine whether or not we want to
propogate the event to sysfs. If we avoid running the function at any point,
we are just dropping hotplug events.
>
> Otoh it's a bit nasty to stop the polling (if the hw really requires it)
> just because the display is suspended, makes waking up the machine just a
> notch more annoying. E.g. in i915 we keep polling (and use some ACPI
> methods if available for hpd detection, to waste less power on rpm
> wakeups).
> -Daniel
>
> > + nv_connector->hpd_task == current) {
> > pm_runtime_get_noresume(dev->dev);
> > } else {
> > ret = pm_runtime_get_sync(dev->dev);
> > @@ -1151,6 +1152,8 @@ nouveau_connector_hotplug(struct nvif_notify
> > *notify)
> > const char *name = connector->name;
> > struct nouveau_encoder *nv_encoder;
> >
> > + nv_connector->hpd_task = current;
> > +
> > if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) {
> > NV_DEBUG(drm, "service %s\n", name);
> > if ((nv_encoder = find_encoder(connector, DCB_OUTPUT_DP)))
> > @@ -1167,6 +1170,7 @@ nouveau_connector_hotplug(struct nvif_notify
> > *notify)
> > nouveau_connector_hotplug_probe(nv_connector);
> > }
> >
> > + nv_connector->hpd_task = NULL;
> > return NVIF_NOTIFY_KEEP;
> > }
> >
> > diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h
> > b/drivers/gpu/drm/nouveau/nouveau_connector.h
> > index 2d9d35a146a4..1964e682ba13 100644
> > --- a/drivers/gpu/drm/nouveau/nouveau_connector.h
> > +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
> > @@ -45,6 +45,7 @@ struct nouveau_connector {
> > u8 *dcb;
> >
> > struct nvif_notify hpd;
> > + struct task_struct *hpd_task;
> >
> > struct drm_dp_aux aux;
> >
> > --
> > 2.17.1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
--
Cheers,
Lyude Paul
More information about the Nouveau
mailing list