[Nouveau] [Bug 107016] New: Gpio error only from kernel higher as 4.x (k2000m; 0x0e73b0a2; version 80.07.40.00.02)
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Sun Jun 24 19:18:15 UTC 2018
https://bugs.freedesktop.org/show_bug.cgi?id=107016
Bug ID: 107016
Summary: Gpio error only from kernel higher as 4.x (k2000m;
0x0e73b0a2; version 80.07.40.00.02)
Product: Mesa
Version: unspecified
Hardware: Other
OS: All
Status: NEW
Severity: normal
Priority: medium
Component: Drivers/DRI/nouveau
Assignee: nouveau at lists.freedesktop.org
Reporter: tothsoft at gmail.com
QA Contact: nouveau at lists.freedesktop.org
Created attachment 140303
--> https://bugs.freedesktop.org/attachment.cgi?id=140303&action=edit
dmesg message from old kernel 3.19 (when it was all ok= no problem)
Dear developers,
this bug of nouveau driver is also always in kernel 4.15 (in last ubuntu).
Maybe it is connected on your changes from 2016:
https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=a24ded627e42d453546c553d609edc073f59cd57
Therefore i must wait on fix, and now i am only on old kernel 3.19 on Linux
mint 17.3, which have support to y2019. Thx
In attachment is dmesg message from old kernel 3.19 (when it was all ok= no
problem).
>From kernels 4+ i have dmesg message:
[ 9007.285922] nouveau 0000:01:00.0: volt: couldn't set 887500uv
[ 9007.285930] nouveau 0000:01:00.0: clk: failed to raise voltage: -22
[ 9007.285933] nouveau 0000:01:00.0: clk: error setting pstate 1: -22
[ 9333.740189] nouveau 0000:01:00.0: volt: couldn't set 825000uv
[ 9333.740196] nouveau 0000:01:00.0: clk: failed to raise voltage: -22
[ 9333.740200] nouveau 0000:01:00.0: clk: error setting pstate 0: -22
so, ..nouveau driver going only according to BIOS clocks ?
GPU clock in BIOS"405 mhz": https://www.techpowerup.com/vgabios/147121/147121
GPU clock with driver "745 mhz":
https://www.techpowerup.com/gpudb/1424/quadro-k2000m
[ 19.715426] nouveau 0000:01:00.0: bios: version 80.07.40.00.02
[ 19.716325] nouveau 0000:01:00.0: mxm: BIOS version 3.0
[ 19.719835] ACPI Warning: \_SB.PCI0.PEGP.DGFX._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 19.720419] nouveau 0000:01:00.0: volt: Type mismatch between the voltage
table type and the GPIO table. Fallback to GPIO mode.
Here is nvidia driver message:
nvidia-smi -q
==============NVSMI LOG==============
Timestamp : Thu Jul 27 06:12:05 2017
Driver Version : 375.66
Attached GPUs : 1
GPU 0000:01:00.0
Product Name : Quadro K2000M
Product Brand : Quadro
Display Mode : Enabled
Display Active : Enabled
Persistence Mode : Disabled
Accounting Mode : Disabled
Accounting Mode Buffer Size : 1920
Driver Model
Current : N/A
Pending : N/A
Serial Number : N/A
GPU UUID : GPU-ff2c74f8-3fa3-b0d5-c61d-fa8141f9c703
Minor Number : 0
VBIOS Version : 80.07.40.00.02
MultiGPU Board : No
Board ID : 0x100
GPU Part Number : N/A
Inforom Version
Image Version : N/A
OEM Object : N/A
ECC Object : N/A
Power Management Object : N/A
GPU Operation Mode
Current : N/A
Pending : N/A
GPU Virtualization Mode
Virtualization mode : None
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x0FFB10DE
Bus Id : 0000:01:00.0
Sub System Id : 0x176B103C
GPU Link Info
PCIe Generation
Max : 2
Current : 1
Link Width
Max : 16x
Current : 16x
Bridge Chip
Type : N/A
Firmware : N/A
Replays since reset : 0
Tx Throughput : N/A
Rx Throughput : N/A
Fan Speed : N/A
Performance State : P8
Clocks Throttle Reasons
Idle : Not Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
Sync Boost : Not Active
Unknown : Not Active
FB Memory Usage
Total : 1997 MiB
Used : 190 MiB
Free : 1807 MiB
BAR1 Memory Usage
Total : 256 MiB
Used : 4 MiB
Free : 252 MiB
Compute Mode : Default
Utilization
Gpu : 4 %
Memory : 12 %
Encoder : 0 %
Decoder : 0 %
Encoder Stats
Active Sessions : 0
Average FPS : 0
Average Latency : 0 ms
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Retired Pages
Single Bit ECC : N/A
Double Bit ECC : N/A
Pending : N/A
Temperature
GPU Current Temp : 46 C
GPU Shutdown Temp : 104 C
GPU Slowdown Temp : 96 C
Power Readings
Power Management : N/A
Power Draw : N/A
Power Limit : N/A
Default Power Limit : N/A
Enforced Power Limit : N/A
Min Power Limit : N/A
Max Power Limit : N/A
Clocks
Graphics : 405 MHz
SM : 405 MHz
Memory : 405 MHz
Video : 405 MHz
Applications Clocks
Graphics : N/A
Memory : N/A
Default Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : 745 MHz
SM : 745 MHz
Memory : 900 MHz
Video : 540 MHz
Clock Policy
Auto Boost : N/A
Auto Boost Default : N/A
Processes
Process ID : 1792
Type : G
Name : /usr/lib/xorg/Xorg
Used GPU Memory : 182 MiB
Process ID : 2569
Type : G
Name : compton
Used GPU Memory : 6 MiB
--
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20180624/437f1c72/attachment.html>
More information about the Nouveau
mailing list