[Openchrome-devel] vt1625 patch

[Claus Rosenberger]

Hi Tim,

i use the Board EX15000 and the most important thing is to not use the bios mode TV+DVI. The board
is not working with this setting, CRT+TV works much better. After this change i got it working, it's
not perfect but the output is ok.

On the TV it's flickering if i go across the amplifier, the projector is working across the
amplifier, on both are black borders around the output, i didn't find a solution to get rid of it.

br, claus

timc schrieb:
> Hi, Claus,
> 	You can try to add some options to see if it works.
> (Device Section)
> Option	"ActiveDevice"	"TV"
> Option	"TVType"	"PAL"
> Option	"TVOutput"	"Composite"
> 				"S-Video"
> 				"YCbCr"
> 				"RGB"
> (Display SubSection)
> 	Modes	"720x576"
> 			"720x576Over"
> 	
> If it still fail to active TV, please tell me which MB you used.
> BRs,
> Tim
> -----Original Message-----
> From: openchrome-devel-bounces at openchrome.org
> [mailto:openchrome-devel-bounces at openchrome.org] On Behalf Of Claus
> Rosenberger
> Sent: Thursday, June 04, 2009 3:42 AM
> To: openchrome-devel at openchrome.org
> Subject: Re: [Openchrome-devel] vt1625 patch
> 
> Hi,
> 
> i tried to confirm PAL 720x576 but i only get a black screen. Please
> can you give some informations with which xorg settings you get a success?
> 
> 
>>>    Hi all,
>>>
>>>    I spent some time to update the current TV register table of VT1625.
>>>
>>>    I verified the following modes on EPIA-EX board. Please feel free
>>>    to give me some comments.
> 
> 
> _______________________________________________
> Openchrome-devel mailing list
> Openchrome-devel at openchrome.org
> http://wiki.openchrome.org/mailman/listinfo/openchrome-devel
> 
> 
> 
>