[Openchrome-users] K8M890 still not working

[Javier Smaldone]

Hi guys.

I'm using linux 2.6.19.1 and X.org 7.1.1 (Debian etch), the drm driver
from git tree and the vt3336 branch of openChrome.

I've followed the instructions in
http://wiki.openchrome.org/tikiwiki/tiki-index.php?page=K8M890 but I
can't get DRI to work on my K8M890.

This is the lspci output for the device:

01:00.0 VGA compatible controller: VIA Technologies, Inc. Unknown
device 3230 (rev 11)

On boot, the kernel says:

agpgart: Detected VIA K8M890CE chipset
agpgart: AGP aperture is 128M @ 0xd0000000
[...]
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized via 2.10.2 20060616 on minor 0:


But X.org reports:

(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
        PM800/PM880/CN400, VM800, K8M890
(II) Primary Device is: PCI 01:00:0
(--) Chipset K8M890 found
[...]
(II) VIA(0): VIAGetRec
(**) VIA(0): Depth 16, (--) framebuffer bpp 16
(==) VIA(0): RGB weight 565
(==) VIA(0): Default visual is TrueColor
(II) VIA(0): Starting to parse config file options...
(==) VIA(0): ShadowFB is disabled.
(==) VIA(0): Acceleration is enabled.
(==) VIA(0): Using XAA acceleration architecture.
(==) VIA(0): Hardware two-color cursors.
[...]
(--) VIA(0): Chipset: "K8M890"
(II) VIA(0): VIAMapMMIO
(--) VIA(0): mapping MMIO @ 0xdd000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xdd200000 with size 0x20000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) VIA(0): Will not print VGA Registers.
(==) VIA(0): Will not scan I2C buses.
(==) VIA(0): Chipset Rev.: 0
(--) VIA(0): Detected MSI K9VGM-V.
[...]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
(II) VIA(0): [drm] loaded kernel module for "via" driver
(II) VIA(0): [drm] DRM interface version 1.0
(II) VIA(0): [drm] drmSetBusid failed (7, PCI:1:0:0), Invalid argument
(EE) VIA(0): [dri] DRIScreenInit failed.  Disabling DRI.


And then, the kernel says:

ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0106407){00} arg(ffe63ff0)
on /dev/dri/card0
ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0086401){00} arg(ffe63ff4)
on /dev/dri/card0
ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0246400){00} arg(082002d8)
on /dev/dri/card0
ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0246400){00} arg(082002d8)
on /dev/dri/card0
ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0106407){00} arg(ffe64300)
on /dev/dri/card0
ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(40086410){00} arg(ffe6430c)
on /dev/dri/card0

As a result, X is working fine (including mplayer with the xv driver,
switching to text mode, etc.), but DRI refuses to work.

Can you help me?

Thanks in advance,

--
Javier Smaldone