[Openchrome-users] K8M890 still not working

[Thomas Hellström]

Javier Smaldone wrote:
> Hi guys.
>
> I'm using linux 2.6.19.1 and X.org 7.1.1 (Debian etch), the drm driver
> from git tree and the vt3336 branch of openChrome.
>
> I've followed the instructions in
> http://wiki.openchrome.org/tikiwiki/tiki-index.php?page=K8M890 but I
> can't get DRI to work on my K8M890.
>
> This is the lspci output for the device:
>
> 01:00.0 VGA compatible controller: VIA Technologies, Inc. Unknown
> device 3230 (rev 11)
>
> On boot, the kernel says:
>
> agpgart: Detected VIA K8M890CE chipset
> agpgart: AGP aperture is 128M @ 0xd0000000
> [...]
> [drm] Initialized drm 1.1.0 20060810
> [drm] Initialized via 2.10.2 20060616 on minor 0:
>
>
> But X.org reports:
>
> (II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
>         PM800/PM880/CN400, VM800, K8M890
> (II) Primary Device is: PCI 01:00:0
> (--) Chipset K8M890 found
> [...]
> (II) VIA(0): VIAGetRec
> (**) VIA(0): Depth 16, (--) framebuffer bpp 16
> (==) VIA(0): RGB weight 565
> (==) VIA(0): Default visual is TrueColor
> (II) VIA(0): Starting to parse config file options...
> (==) VIA(0): ShadowFB is disabled.
> (==) VIA(0): Acceleration is enabled.
> (==) VIA(0): Using XAA acceleration architecture.
> (==) VIA(0): Hardware two-color cursors.
> [...]
> (--) VIA(0): Chipset: "K8M890"
> (II) VIA(0): VIAMapMMIO
> (--) VIA(0): mapping MMIO @ 0xdd000000 with size 0x9000
> (--) VIA(0): mapping BitBlt MMIO @ 0xdd200000 with size 0x20000
> (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (==) VIA(0): Will not print VGA Registers.
> (==) VIA(0): Will not scan I2C buses.
> (==) VIA(0): Chipset Rev.: 0
> (--) VIA(0): Detected MSI K9VGM-V.
> [...]
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 7, (OK)
> (II) VIA(0): [drm] loaded kernel module for "via" driver
> (II) VIA(0): [drm] DRM interface version 1.0
> (II) VIA(0): [drm] drmSetBusid failed (7, PCI:1:0:0), Invalid argument
> (EE) VIA(0): [dri] DRIScreenInit failed.  Disabling DRI.
>
>
> And then, the kernel says:
>
> ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0106407){00} arg(ffe63ff0)
> on /dev/dri/card0
> ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0086401){00} arg(ffe63ff4)
> on /dev/dri/card0
> ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0246400){00} arg(082002d8)
> on /dev/dri/card0
> ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0246400){00} arg(082002d8)
> on /dev/dri/card0
> ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(c0106407){00} arg(ffe64300)
> on /dev/dri/card0
> ioctl32(Xorg:2876): Unknown cmd fd(7) cmd(40086410){00} arg(ffe6430c)
> on /dev/dri/card0
>
> As a result, X is working fine (including mplayer with the xv driver,
> switching to text mode, etc.), but DRI refuses to work.
>
> Can you help me?
>
>   
Hmm,
Could it be that you are using a 64-bit kernel with a 32-bit X server?

/Thomas

> Thanks in advance,
>
> --
> Javier Smaldone
>
> _______________________________________________
> openchrome-users mailing list
> openchrome-users at openchrome.org
> http://wiki.openchrome.org/mailman/listinfo/openchrome-users
> Main page:
> http://www.openchrome.org
> Wiki:
> http://wiki.openchrome.org
> User Forum:
> http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
>
>
>