[Openchrome-users] Re: No Display after installing Via Driver

[Wilson L.]

> >On 31/12/2005 21:37, Wilson L. wrote:
> > > I installed FC4 with all default updates and installed the DRM Kernel
> > > module from here:
> > >
> > > http://washington.kelkoo.net/epia/FC4/RPMS/
> > >
> > > Then I followed these instructions to install the VIA drivers:
> > >
> > >
> >http://sourceforge.net/docman/display_doc.php?docid=21910&group_id=102048
> >
> >Err, since you're running FC4 and already using Xavier's DRM kernel rpm,
> >why not get the rest of his rpms? If you really want to build it
> >yourself, you should probably take a look at the source RPM file, at
> >http://washington.kelkoo.net/epia/FC4/SRPMS/
> >
> >Cheers,
> >
> >John.
> >
>
>Hi John
>
>I took your advice and used the rest of Xavier's RPMs and did an yum 
>update.
>   My monitor still gets no signal when X loads.  Here is the latest X 
>logs:
>
>http://illson.hopto.org/Xorg.0.log_upd
>
>I do notice that these strange messages in the logs:
>
>(II) VIA(0): Not using default mode "1024x768" (hsync out of range)
>(II) VIA(0): Not using default mode "512x384" (bad mode
>clock/interlace/doublescan)
>(WW) (1024x768,Monitor0) mode clock 94.5MHz exceeds DDC maximum 80MHz
>(II) VIA(0): Not using default mode "1024x768" (hsync out of range)
>(II) VIA(0): Not using default mode "512x384" (bad mode
>clock/interlace/doublescan)
>(WW) (1152x864,Monitor0) mode clock 108MHz exceeds DDC maximum 80MHz
>(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
>(II) VIA(0): Not using default mode "576x432" (bad mode
>clock/interlace/doublescan)
>(WW) (1280x960,Monitor0) mode clock 108MHz exceeds DDC maximum 80MHz
>
>And I do have my xorg.conf set correctly to the specs of the monitor.
>Please Advise
>
>Wilson
>
>------------------------------
>
>Message: 2
>Date: Mon, 2 Jan 2006 22:29:44 +0100
>From: "Ethan Arnold" <ethan at arnold.net>
>Subject: AW: [Openchrome-users] Re: No Display after installing Via
>	Drive
>To: <openchrome-users at openchrome.org>
>Message-ID: <200601022129.k02LTSh20636 at robo-city.de>
>Content-Type: text/plain;	charset="us-ascii"
>
>What's in your xorg.conf?
>Maybe the available graphics modes (modelines?) of the display card are set
>wrong?
>
>
> > (II) VIA(0): Not using default mode "1024x768" (hsync out of range)
> > (II) VIA(0): Not using default mode "512x384" (bad mode
>clock/interlace/doublescan)
> > (WW) (1024x768,Monitor0) mode clock 94.5MHz exceeds DDC maximum 80MHz
>
>And I do have my xorg.conf set correctly to the specs of the monitor.
>Please Advise
>
>Wilson
>
Hey Ethan

Thanks for your reply, i am not sure why you mean by the graphics mode, but 
here is a link to my xorg.conf file:

http://illson.hopto.org/xorg.conf

Thanks