[Openchrome-users] CN400 interlaced modes / RGB output
Lloyd Williams
binary_frog
Sat Mar 4 14:35:04 PST 2006
Ivor Hewitt wrote:
> As far as we know, no it's not possible to get an interlaced output from
> either the CLE266 or CN400.
>
Yeah, I tried to look through the source for any hint of interlace
support, but I'm not familiar with driver source or low-level video. I
wonder whether the hardware itself supports it.
> The VT1625 supports RGB interlaced and progressive.
> It should be possible to get the chip outputting an RGB signal instead of a
> YCbCr signal.
> It just needs someone with a board with a VT1625 on it to play with the code.
>
VT1622, 1623 and 1625 (not VT1621) all support YPbPr and RGB output
(according to http://www.via.com.tw/en/products/video-display/tv/). Only
the EPIA MS series (CLE266, VT1622A) seem to have headers on the
motherboard for actually using these outputs though.
I would think it's possible to get RGB/YPbPr on other EPIA boards with a
bit of soldering, but you'd probably want a datasheet. I've ordered a MS
10000E, I'll try to report back on how the headers are connected to the
chip.
> Well you have the component output to consider also.
>
YPbPr? My TV doesn't support it :(
More information about the Openchrome-users
mailing list