[Openchrome-users] compile error svn rev 181

[Karl Hiramoto]

Boris Du?ek wrote:
> Hi,
> 
> try applying a relevant part of the patch at 
> http://www.tbs-software.com/morgoth/files/private/via/xf86-video-openchrome_xv-2.patch, 
> openchrome compiles with it for me under xorg 7.1 rc. However I was unable to 
> test whether the driver works fine with the patch.

I was lazy and applied the whole patch, rather than selective parts.. Compiles,
X starts, but shows nothing but a black screen.


The last page or so of the Xorg.0.log:

(II) VIA(0): VT1622Power
(II) VIA(0): ViaSetPrimaryFIFO
(II) VIA(0): ViaSetPrimaryDotclock to 0x288800
(II) VIA(0): ViaSetUseExternalClock
(II) VIA(0): 3D Engine has been initialized.
(II) VIA(0): VIAAdjustFrame
(II) VIA(0): VIAAdjustFrame
(II) VIA(0): - Blanked
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) VIA(0): [drm] DRM interface version 1.2
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0xf8857000
(II) VIA(0): [drm] mapped SAREA 0xf8857000 to 0xb3b3d000
(II) VIA(0): [drm] framebuffer handle = 0xe8000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [drm] register handle = 0xec000000
(II) VIA(0): [drm] framebuffer handle = 0xe8000000
(II) VIA(0): [drm] mmio Registers = 0xec000000
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): - Visuals set up
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): - B & W
(II) VIA(0): Using 2304 lines for offscreen memory.
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        8x8 color pattern filled rectangles
        Solid Lines
        Dashed Lines
        Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                31 128x128 slots
                12 256x256 slots
                4 512x512 slots
                32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): - Backing store set up
(II) VIA(0): - SW cursor set up
(II) VIA(0): VIAHWCursorInit
(II) VIA(0): - Def Color map set up
(II) VIA(0): VIALoadPalette
(II) VIA(0): - Palette loaded
(**) Option "dpms"
(**) VIA(0): DPMS enabled
(II) VIA(0): - DPMS set up
(II) VIA(0): - Color maps etc. set up
(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x259
(II) VIA(0): [drm] Found AGP v3 compatible device. Trying AGP 8X mode.
(II) VIA(0): [drm] Trying to enable AGP fast writes.
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xe0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xe0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [dri] use agp.
(II) VIA(0): [drm] Using 54251488 bytes for DRM memory heap.
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): X context handle = 0x1
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [DRI] installation complete
(II) VIA(0): [dri] kernel data initialized.



-
karl