[Openchrome-users] compile error svn rev 181

[Boris Dušek]

I actually tested it with latest openchrome, but on a fresh system where I 
never tested it before, so I could not say that my result is valid, but my 
result was same, i.e. blank screen with the same config file for which it 
worked on the previous (very similar) system, so there probably is something 
on it.

Cheers,
Boris Dusek

On Monday 01 May 2006 20:44, you wrote:
> Boris Du?ek wrote:
> > Hi,
> >
> > try applying a relevant part of the patch at
> > http://www.tbs-software.com/morgoth/files/private/via/xf86-video-openchro
> >me_xv-2.patch, openchrome compiles with it for me under xorg 7.1 rc.
> > However I was unable to test whether the driver works fine with the
> > patch.
>
> I was lazy and applied the whole patch, rather than selective parts..
> Compiles, X starts, but shows nothing but a black screen.
>
>
> The last page or so of the Xorg.0.log:
>
> (II) VIA(0): VT1622Power
> (II) VIA(0): ViaSetPrimaryFIFO
> (II) VIA(0): ViaSetPrimaryDotclock to 0x288800
> (II) VIA(0): ViaSetUseExternalClock
> (II) VIA(0): 3D Engine has been initialized.
> (II) VIA(0): VIAAdjustFrame
> (II) VIA(0): VIAAdjustFrame
> (II) VIA(0): - Blanked
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 7, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 7, (OK)
> drmOpenByBusid: Searching for BusID PCI:1:0:0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 7, (OK)
> drmOpenByBusid: drmOpenMinor returns 7
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (II) VIA(0): [drm] DRM interface version 1.2
> (II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
> (II) VIA(0): [drm] added 8192 byte SAREA at 0xf8857000
> (II) VIA(0): [drm] mapped SAREA 0xf8857000 to 0xb3b3d000
> (II) VIA(0): [drm] framebuffer handle = 0xe8000000
> (II) VIA(0): [drm] added 1 reserved context for kernel
> (II) VIA(0): [dri] visual configs initialized.
> (II) VIA(0): [drm] register handle = 0xec000000
> (II) VIA(0): [drm] framebuffer handle = 0xe8000000
> (II) VIA(0): [drm] mmio Registers = 0xec000000
> (II) VIA(0): [dri] mmio mapped.
> (II) VIA(0): - Visuals set up
> (II) VIA(0): VIAInternalScreenInit
> (II) VIA(0): - B & W
> (II) VIA(0): Using 2304 lines for offscreen memory.
> (II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
>         Screen to screen bit blits
>         Solid filled rectangles
>         8x8 mono pattern filled rectangles
>         8x8 color pattern filled rectangles
>         Solid Lines
>         Dashed Lines
>         Image Writes
>         Offscreen Pixmaps
>         Setting up tile and stipple cache:
>                 31 128x128 slots
>                 12 256x256 slots
>                 4 512x512 slots
>                 32 8x8 color pattern slots
> (==) VIA(0): Backing store disabled
> (II) VIA(0): - Backing store set up
> (II) VIA(0): - SW cursor set up
> (II) VIA(0): VIAHWCursorInit
> (II) VIA(0): - Def Color map set up
> (II) VIA(0): VIALoadPalette
> (II) VIA(0): - Palette loaded
> (**) Option "dpms"
> (**) VIA(0): DPMS enabled
> (II) VIA(0): - DPMS set up
> (II) VIA(0): - Color maps etc. set up
> (II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x259
> (II) VIA(0): [drm] Found AGP v3 compatible device. Trying AGP 8X mode.
> (II) VIA(0): [drm] Trying to enable AGP fast writes.
> (II) VIA(0): [drm] drmAgpEnabled succeeded
> (II) VIA(0): [drm] agpAddr = 0xe0000000
> (II) VIA(0): [drm] agpBase = (nil)
> (II) VIA(0): [drm] agpAddr = 0xe0000000
> (II) VIA(0): [drm] agpSize = 0x01e00000
> (II) VIA(0): [drm] agp physical addr = 0x00000000
> (II) VIA(0): [dri] use agp.
> (II) VIA(0): [drm] Using 54251488 bytes for DRM memory heap.
> (II) VIA(0): [dri] frame buffer initialized.
> (II) VIA(0): X context handle = 0x1
> (II) VIA(0): [drm] installed DRM signal handler
> (II) VIA(0): [DRI] installation complete
> (II) VIA(0): [dri] kernel data initialized.
>
>
>
> -
> karl