[Openchrome-users] mplayer 1.0rc1 with xvmc-support?

[Paul Bender]

Not that this is helpful, but when I build MPlayer 1.0rc1 for MiniMyth 
<http://linpvr.org>, xvmc-vld works on my VIA EPIA ME6000.

As I posted, I split the openchrome patch into two and created three 
patches: openchrome_xvmc_vld, remove_bobdeint and openchrome_bob. 
However, I only use the openchrome_xvmc_vld patch. I do not apply the 
patches that change the deinterlacing. While the deinterlace changing 
patches apply, I have not tested whether or not things work with them 
applied. In addition, I have not tested the MPlayer deinterlacing 
because my VIA EPIA ME6000 is connected to an SD CRT TV using S-Video.

Does xvmc-vld work when you build it with only the openchrome_xvmc_vld 
patch?

Gregoire Gentil wrote:
> I have the same problem. Clean install and build, latest openchrome
> (rev. 230), VIA CLE266 / VT8235. I hope that someone can help too,
> 
> Gregoire
> 
>> ------------------------------
>>
>> Message: 5
>> Date: Sat, 25 Nov 2006 20:07:02 +0100 (CET)
>> From: "Flipsen1977" <userforum at openchrome.org>
>> Subject: [Openchrome-users] mplayer 1.0rc1 with xvmc-support?
>> To: openchrome-users at openchrome.org
>> Message-ID: <Flipsen1977-0-bcaec24897 at wiki.openchrome.org>
>> Content-Type: text/plain; charset="utf-8"
>>
>> mplayer 1.0rc1 with xvmc-support?
>> Well, I downloaded mplayer 1.0rc1-sources, patched it with 
>> the three patches and made ./configure with described 
>> options: --enable-xvmc --with-xvmclib=XvMCW.
>>
>> I did make, make install, and everything seemed to be fine. 
>> Unless I wanted to use xvmc.
>>
>> When I use this parameters: -vo xvmc,xv -vc ffmpeg12mc, 
>> mplayer always falls back to xv.
>>
>> So I thought I leave the fallback-option behind and use just 
>> -vo xvmc -vc ffmpeg12mc, but than it told me: Error 
>> opening/initializing the selected video_out (-vo) device. 
>> After typing mplayer -vo help, it shows me the following:
>>
>> Player 1.0rc1-3.3.6 (C) 2000-2006 MPlayer Team
>> CPU: VIA Nehemiah (Family: 6, Model: 9, Stepping: 8)
>> CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0 
>> Compiled for x86 CPU with extensions: MMX MMX2 SSE Available 
>> video output drivers:
>>         xv      X11/Xv
>>         x11     X11 ( XImage/Shm )
>>         xover   General X11 driver for overlay capable video 
>> output drivers
>>         dga     DGA ( Direct Graphic Access V2.0 )
>>         fbdev   Framebuffer Device
>>         fbdev2  Framebuffer Device
>>         directfb        Direct Framebuffer Device
>>         dfbmga  DirectFB / Matrox G200/G400/G450/G550
>>         xvidix  X11 (VIDIX)
>>         cvidix  console VIDIX
>>         null    Null video output
>>         xvmc    XVideo Motion Compensation
>>         mpegpes Mpeg-PES to DVB card
>>         yuv4mpeg        yuv4mpeg output for mjpegtools
>>         png     PNG file
>>         tga     Targa output
>>         pnm     PPM/PGM/PGMYUV file
>>         md5sum  md5sum of each frame
>>
>> So why the hell it doesn't work? I'm using a SP8000 with 
>> CN400-chipset. Hope someone can help!
>>
>> Flipsen
>>
> 
> 
> 
> _______________________________________________
> openchrome-users mailing list
> openchrome-users at openchrome.org
> http://wiki.openchrome.org/mailman/listinfo/openchrome-users
> Main page:
> http://www.openchrome.org
> Wiki:
> http://wiki.openchrome.org
> User Forum:
> http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
>