[Openchrome-users] mplayer 1.0rc1 with xvmc-support?

[Gregoire Gentil]

Actually, I didn't build it with the deinterlacing patches and still
have the same bug,

Gr?goire



> -----Original Message-----
> From: Paul Bender [mailto:pebender at san.rr.com] 
> Sent: Monday, November 27, 2006 2:21 PM
> To: gregoire at gentil.com
> Cc: openchrome-users at openchrome.org
> Subject: Re: [Openchrome-users] mplayer 1.0rc1 with xvmc-support?
> 
> 
> Not that this is helpful, but when I build MPlayer 1.0rc1 for 
> MiniMyth 
> <http://linpvr.org>, xvmc-vld works on my VIA EPIA ME6000.
> 
> As I posted, I split the openchrome patch into two and created three 
> patches: openchrome_xvmc_vld, remove_bobdeint and openchrome_bob. 
> However, I only use the openchrome_xvmc_vld patch. I do not apply the 
> patches that change the deinterlacing. While the deinterlace changing 
> patches apply, I have not tested whether or not things work with them 
> applied. In addition, I have not tested the MPlayer deinterlacing 
> because my VIA EPIA ME6000 is connected to an SD CRT TV using S-Video.
> 
> Does xvmc-vld work when you build it with only the 
> openchrome_xvmc_vld 
> patch?
> 
> Gregoire Gentil wrote:
> > I have the same problem. Clean install and build, latest openchrome 
> > (rev. 230), VIA CLE266 / VT8235. I hope that someone can help too,
> > 
> > Gregoire
> > 
> >> ------------------------------
> >>
> >> Message: 5
> >> Date: Sat, 25 Nov 2006 20:07:02 +0100 (CET)
> >> From: "Flipsen1977" <userforum at openchrome.org>
> >> Subject: [Openchrome-users] mplayer 1.0rc1 with xvmc-support?
> >> To: openchrome-users at openchrome.org
> >> Message-ID: <Flipsen1977-0-bcaec24897 at wiki.openchrome.org>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> mplayer 1.0rc1 with xvmc-support?
> >> Well, I downloaded mplayer 1.0rc1-sources, patched it with
> >> the three patches and made ./configure with described 
> >> options: --enable-xvmc --with-xvmclib=XvMCW.
> >>
> >> I did make, make install, and everything seemed to be fine.
> >> Unless I wanted to use xvmc.
> >>
> >> When I use this parameters: -vo xvmc,xv -vc ffmpeg12mc,
> >> mplayer always falls back to xv.
> >>
> >> So I thought I leave the fallback-option behind and use just
> >> -vo xvmc -vc ffmpeg12mc, but than it told me: Error 
> >> opening/initializing the selected video_out (-vo) device. 
> >> After typing mplayer -vo help, it shows me the following:
> >>
> >> Player 1.0rc1-3.3.6 (C) 2000-2006 MPlayer Team
> >> CPU: VIA Nehemiah (Family: 6, Model: 9, Stepping: 8)
> >> CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> >> Compiled for x86 CPU with extensions: MMX MMX2 SSE Available 
> >> video output drivers:
> >>         xv      X11/Xv
> >>         x11     X11 ( XImage/Shm )
> >>         xover   General X11 driver for overlay capable video 
> >> output drivers
> >>         dga     DGA ( Direct Graphic Access V2.0 )
> >>         fbdev   Framebuffer Device
> >>         fbdev2  Framebuffer Device
> >>         directfb        Direct Framebuffer Device
> >>         dfbmga  DirectFB / Matrox G200/G400/G450/G550
> >>         xvidix  X11 (VIDIX)
> >>         cvidix  console VIDIX
> >>         null    Null video output
> >>         xvmc    XVideo Motion Compensation
> >>         mpegpes Mpeg-PES to DVB card
> >>         yuv4mpeg        yuv4mpeg output for mjpegtools
> >>         png     PNG file
> >>         tga     Targa output
> >>         pnm     PPM/PGM/PGMYUV file
> >>         md5sum  md5sum of each frame
> >>
> >> So why the hell it doesn't work? I'm using a SP8000 with
> >> CN400-chipset. Hope someone can help!
> >>
> >> Flipsen
> >>
> > 
> >