[Openchrome-users] [openChrome] #71: Problem with TV encoder detection on CN400 with driver snapshot 202

[openChrome]

#71: Problem with TV encoder detection on CN400 with driver snapshot 202
--------------------------------+-------------------------------------------
Reporter:  almrobert at gmail.com  |       Owner:  somebody
    Type:  defect               |      Status:  new     
Priority:  major                |   Component:  xdriver 
 Version:                       |    Keywords:          
--------------------------------+-------------------------------------------
 TV out doesn't seem to work as supposed to on CN400... Output on TV is
 possible thou if forced in BIOS. But then you are limited to the console
 resolution in X and cannot change resolution on-the-fly. (And I can only
 use non native TV resolution, 640x480, 800x600 or 1024x768)

 What should be noted is that I have compiled the driver for XFree, not
 xorg. But the detection of the TV Out encoder should not be affected by
 this....

 Snippet from XFree log:

 (II) VIA(0): VIAGetRec
 (**) VIA(0): Depth 24, (--) framebuffer bpp 32
 (==) VIA(0): RGB weight 888
 (==) VIA(0): Default visual is TrueColor
 (**) VIA(0): Option "ActiveDevice" "TV"
 (**) VIA(0): Option "TVType" "PAL"
 (**) VIA(0): Option "TVOutput" "S-Video"
 (**) VIA(0): Option "EnableAGPDMA" "true"
 (==) VIA(0): Using HW cursor
 (**) VIA(0): Option: EnableAGPDMA - Enabling AGP DMA
 (**) VIA(0): TV Type is PAL
 (**) VIA(0): TV Output Signal is S-Video
 (--) VIA(0): Chipset: "PM800/PM880/CN400"
 (II) VIA(0): VIAMapMMIO
 (--) VIA(0): mapping MMIO @ 0xf4000000 with size 0x9000
 (--) VIA(0): mapping BitBlt MMIO @ 0xf4200000 with size 0x10000
 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
 0x0000
 (--) VIA(0): Chipset Rev.: 0
 (WW) VIA(0): Manufacturer plainly copied main PCI ids to Subsystem/Card
 ids.
 (--) VIA(0): Detected VIA VT3118 (PM800).
 (II) VIA(0): Detected MemClk 6
 (II) VIA(0): ViaGetMemoryBandwidth
 (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
 (--) VIA(0): videoram =  65536k
 (II) Loading sub module "i2c"
 (II) LoadModule: "i2c"
 (II) Loading /usr/X11R6/lib/modules/libi2c.a
 (II) Module i2c: vendor="The XFree86 Project"
         compiled for 4.5.0, module version = 1.2.0
         ABI class: XFree86 Video Driver, version 0.8
 (II) VIA(0): ViaI2CInit
 (II) VIA(0): ViaI2CBus1Init
 (II) VIA(0): I2C bus "I2C bus 1" initialized.
 (II) VIA(0): ViaI2cBus2Init
 (II) VIA(0): I2C bus "I2C bus 2" initialized.
 (II) VIA(0): ViaI2CBus3Init
 (II) VIA(0): I2C bus "I2C bus 3" removed.
 (II) Loading sub module "ddc"
 (II) LoadModule: "ddc"
 (II) Reloading /usr/X11R6/lib/modules/libddc.a
 (**) VIA(0): Option "NoDDC"
 (II) VIA(0): ViaOutputsDetect
 (II) VIA(0): VIATVDetect
 (II) VIA(0): ViaOutputsSelect
 (II) VIA(0): ViaOutputsSelect: X Configuration: 0x04
 (II) VIA(0): ViaOutputsSelect: BIOS Initialised register: 0x07
 (WW) VIA(0): Unable to activate TV encoder: no TV encoder present.
 (II) VIA(0): ViaOutputsSelect: CRT.
 (II) VIA(0): ViaModesAttach

 Attaching full logs and config.

-- 
Ticket URL: <http://www.openchrome.org/trac/ticket/71>
openChrome <http://www.openchrome.org/>
The openChrome project