[Openchrome-users] CX700M(2) on VIA EPIA-EX15000G

[Xavier Bachelot]

Tobias Ceglarek wrote:
> Hello again,
> 
>> Either manually set proper values for your monitor
> 
> I am not an expert in configuring X, but I have tried out to manually
> set the values by adding
> 
> HorizSync 30-80
> VertRefresh 30-100
> 
> in the xorg.conf. Then the output is a little bit different (without the
> message "vrefresh out of range"):
> 
> ...
> (II) CHROME(0): monitor0: Using default hsync range of 30.00-80.00 kHz
> (II) CHROME(0): monitor0: Using default vrefresh range of 30.00-100.00
> Hz
> (II) CHROME(0): Clock range:  20.00 to 230.00 MHz
> (II) CHROME(0): ViaValidMode: Validating 640x350 (31500)
> (II) CHROME(0): ViaModePrimaryVGAValid
> (II) CHROME(0): Not using default mode "320x175" (bad mode
> clock/interlace/doublescan)
> ...
> 
> But below there is "hsync out of range" anymore.
> 
> Which ranges are needed by openchrome?

The ranges are not 'needed' by openchrome, this is specific to your monitor.

I can't tell what is going wrong w/o the full log.
> 
>>  or fix the conf to allow the monitor to send its EDID.
> 
> How can I do this?
> 
No idea. This is the default on my distro, I don't know what distro you 
are using, nor how your X has been compiled.

Regards,
Xavier