[Openchrome-users] GETTING openchrome-stable.sh TO WORK
Jelle de Jong
jelledejong
Sun Jan 13 11:12:20 PST 2008
Hi Richard,
No this will not be possible the MESA 3D drivers for the Via chipsets
are missing texture rendering implementations.
So Compiz will not work.
3D will work a little bit, but my experience is that it is very
unstable. Better disable 3D rendering at all. then you have a good 2D
system with mpeg decoding.
Kind regards,
Jelle
Richard May wrote:
> Yes, I"m using the openchrome-stable.sh
> I will do as below - but my question is this
> Is there anyway to get this on-board graphics card working so I can use
> the advance features (like compiz)?
>
>
>
> On Jan 13, 2008 1:39 PM, Jelle de Jong <jelledejong at powercraft.nl
> <mailto:jelledejong at powercraft.nl>> wrote:
>
> Richard May wrote:
> > Here is my info - can someone tell me why mine is not working.
> When I've
> > gone through all the steps my screen is fuzzy lines and I have
> to rerun
> > in safe mode to reconfigure the xorg.con -
> > I've got the P4M900 Micro 775 motherboard - onboard video Chrome9 HC
> > 3D/2D Graphics card with a Max shared video memory of 256MB
> >
> > This is what I get when I do the following command in terminal
> window
> > glxifno | grep rendering
> >
> > Xlib: extension "GLX" missing on display ":0.0".
> > Xlib: extension "GLX" missing on display ": 0.0".
> > Xlib: extension "GLX" missing on display ": 0.0".
> > Error: couldn't find RGB GLX visual
> > Xlib: extension "GLX" missing on display ":0.0".
> > Xlib: extension "GLX" missing on display ": 0.0".
> > Xlib: extension "GLX" missing on display ": 0.0".
> > Xlib: extension "GLX" missing on display ":0.0".
> >
> > This is from my xorg.conf file
> >
> > # xorg.conf (xorg X Window System server configuration file)
> > #
> > # This file was generated by failsafeDexconf, using
> > # values from the debconf database and some overrides to use vesa
> mode.
> > #
> > # You should use dexconf or another such tool for creating a "real"
> > xorg.conf
> > # For example:
> > # sudo dpkg-reconfigure -phigh xserver-xorg
> > Section "Files"
> > EndSection
> >
> > Section "Module"
> > Disable "glx"
> > Disable "xtrap"
> > Disable "record"
> > Disable "GLcore"
> > Disable "dri"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Generic Keyboard"
> > Driver "kbd"
> > Option "CoreKeyboard"
> > Option "XkbRules" "xorg"
> > Option "XkbModel" "pc105"
> > Option "XkbLayout" "us"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Configured Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/input/mice"
> > Option "Protocol" "ImPS/2"
> > Option "ZAxisMapping" "4 5"
> > Option "Emulate3Buttons" "true"
> > EndSection
> >
> > Section "Device"
> > Identifier "Failsafe Device"
> > Boardname "vesa"
> > Busid "PCI:1:0:0"
> > Driver "openchrome"
> > Screen 0
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Failsafe Monitor"
> > Vendorname "Acer"
> > Modelname "Acer AL1914"
> > Horizsync 30.0-83.0
> > Vertrefresh 55.0-75.0
> > modeline "640x480 at 60" 25.2 640 656 752 800 480 490 492 525 -vsync
> -hsync
> > modeline "640x480 at 72" 31.5 640 664 704 832 480 489 491 520 -vsync
> -hsync
> > modeline "640x480 at 75" 31.5 640 656 720 840 480 481 484 500 -vsync
> -hsync
> > modeline "800x600 at 56" 36.0 800 824 896 1024 600 601 603 625
> +hsync +vsync
> > modeline "800x600 at 72" 50.0 800 856 976 1040 600 637 643 666
> +hsync +vsync
> > modeline "800x600 at 75" 49.5 800 816 896 1056 600 601 604 625
> +hsync +vsync
> > modeline "800x600 at 60" 40.0 800 840 968 1056 600 601 605 628
> +hsync +vsync
> > modeline "832x624 at 75" 57.284 832 864 928 1152 624 625 628 667
> -vsync -hsync
> > modeline "1024x768 at 75" 78.8 1024 1040 1136 1312 768 769 772 800
> +hsync
> > +vsync
> > modeline "1024x768 at 70" 75.0 1024 1048 1184 1328 768 771 777 806
> -vsync
> > -hsync
> > modeline " 1024x768 at 60" 65.0 1024 1048 1184 1344 768 771 777 806
> -vsync
> > -hsync
> > modeline "1152x864 at 75" 108.0 1152 1216 1344 1600 864 865 868 900
> +hsync
> > +vsync
> > modeline "1280x1024 at 75 " 135.0 1280 1296 1440 1688 1024 1025 1028
> 1066
> > +hsync +vsync
> > modeline "1280x960 at 60" 102.1 1280 1360 1496 1712 960 961 964 994
> -hsync
> > +vsync
> > modeline "1280x1024 at 60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync +vsync
> > modeline "1280x960 at 75" 129.86 1280 1368 1504 1728 960 961 964 1002
> > -hsync +vsync
> > modeline "1400x1050 at 60" 122.61 1400 1488 1640 1880 1050 1051 1054
> 1087
> > -hsync +vsync
> > modeline "1400x1050 at 75" 155.85 1400 1496 1648 1896 1050 1051 1054
> 1096
> > -hsync +vsync
> > modeline "1600x1200 at 65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250
> > +hsync +vsync
> > modeline "1600x1200 at 60 " 162.0 1600 1664 1856 2160 1200 1201 1204
> 1250
> > +hsync +vsync
> > modeline "1792x1344 at 60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394
> > -hsync +vsync
> > Gamma 1.0
> > EndSection
> >
> > Section "Screen"
> > Identifier "Default Screen"
> > Device "Failsafe Device"
> > Monitor "Failsafe Monitor"
> > Defaultdepth 24
> > SubSection "Display"
> > Depth 24
> > Virtual 1024 768
> > Modes "1024x768 at 75 " "1024x768 at 70" "832x624 at 75 " "1024x768 at 60"
> "800x600 at 60"
> > EndSubSection
> > EndSection
> >
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > screen 0 "Default Screen" 0 0
> > Inputdevice "Generic Keyboard"
> > Inputdevice "Configured Mouse"
> > EndSection
> > Section "ServerFlags"
> > EndSection
> >
> > This is from hwinfo-2008-01-12-02: 51.txt
> >
> > version-stable: 0.1.1
> > -- -- -- -- --
> > 33: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_3371
> > Unique ID: VCu0.kqXiTutahq5
> > Parent ID: vSkL.S16qDHSKEeD
> > SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
> > SysFS BusID: 0000:01:00.0
> > Hardware Class: graphics card
> > Model: "Biostar Microtech Int'l VGA compatible controller"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x3371
> > SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp"
> > SubDevice: pci 0x1207
> > Revision: 0x01
> > Memory Range: 0xd0000000-0xd7ffffff (rw,prefetchable)
> > Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable)
> > Memory Range: 0xfc000000-0xfc00ffff (ro,prefetchable,disabled)
> > IRQ: 11 (no events)
> > I/O Ports: 0x3c0-0x3df (rw)
> > Module Alias: "pci:v00001106d00003371sv00001565sd00001207bc03sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> > Attached to: #18 (PCI bridge)
> >
> > Primary display adapter: #33
> > -- -- -- -- --
> > 10: PCI(AGP) 00.0: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_364
> > Unique ID: qLht.6OF83IMq_u8
> > SysFS ID: /devices/pci0000:00/0000:00:00.0
> > SysFS BusID: 0000:00:00.0
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x0364
> > SubVendor: pci 0x1106 "VIA Technologies, Inc."
> > SubDevice: pci 0x0364
> > Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable)
> > Module Alias: "pci:v00001106d00000364sv00001106sd00000364bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 11: PCI 00.1: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_1364
> > Unique ID: hgAj.MpMCJ1kBIz9
> > SysFS ID: /devices/pci0000:00/0000:00: 00.1
> > SysFS BusID: 0000:00:00.1
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x1364
> > Module Alias: "pci:v00001106d00001364sv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 12: PCI 00.2: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_2364
> > Unique ID: Z+fY.czyKNZlION5
> > SysFS ID: /devices/pci0000:00/0000:00: 00.2
> > SysFS BusID: 0000:00:00.2
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x2364
> > Module Alias: "pci:v00001106d00002364sv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 13: PCI 00.3: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_3364
> > Unique ID: QK9O.s7ZTRfJZWoD
> > SysFS ID: /devices/pci0000:00/0000:00: 00.3
> > SysFS BusID: 0000:00:00.3
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x3364
> > Module Alias: "pci:v00001106d00003364sv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 14: PCI 00.4: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_4364
> > Unique ID: HfeD.6I9cVBLgcC9
> > SysFS ID: /devices/pci0000:00/0000:00: 00.4
> > SysFS BusID: 0000:00:00.4
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x4364
> > Module Alias: "pci:v00001106d00004364sv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 16: PCI 00.6: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_6364
> > Unique ID: 0Jdu.ccLtdpw1r1D
> > SysFS ID: /devices/pci0000:00/0000:00: 00.6
> > SysFS BusID: 0000:00:00.6
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x6364
> > Module Alias: "pci:v00001106d00006364sv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 17: PCI 00.7: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_7364
> > Unique ID: ud6k.smx+hvUIzS5
> > SysFS ID: /devices/pci0000:00/0000:00: 00.7
> > SysFS BusID: 0000:00:00.7
> > Hardware Class: bridge
> > Model: "VIA Host bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x7364
> > Module Alias: "pci:v00001106d00007364sv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 18: PCI 01.0: 0604 PCI bridge (Normal decode)
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_b198
> > Unique ID: vSkL.S16qDHSKEeD
> > SysFS ID: /devices/pci0000:00/0000:00:01.0
> > SysFS BusID: 0000:00:01.0
> > Hardware Class: bridge
> > Model: "VIA VT8237 PCI Bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0xb198 "VT8237 PCI Bridge"
> > Module Alias: "pci:v00001106d0000B198sv00000000sd00000000bc06sc0
> 4i00"
> > Driver Info #0:
> > Driver Status: shpchp is active
> > Driver Activation Cmd: "modprobe shpchp"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 19: PCI 02.0: 0604 PCI bridge (Normal decode)
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_a364
> > Unique ID: _Znp.g78+51qvkd0
> > SysFS ID: /devices/pci0000:00/0000:00:02.0
> > SysFS BusID: 0000:00: 02.0
> > Hardware Class: bridge
> > Model: "VIA PCI bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0xa364
> > Revision: 0x80
> > Driver: "pcieport-driver"
> > IRQ: 16 (no events)
> > Module Alias: "pci:v00001106d0000A364sv00000000sd00000000bc06sc0
> 4i00"
> > Driver Info #0:
> > Driver Status: shpchp is active
> > Driver Activation Cmd: "modprobe shpchp"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 20: PCI 03.0: 0604 PCI bridge (Normal decode)
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_c364
> > Unique ID: 3hqH.ASKGEfPHzS4
> > SysFS ID: /devices/pci0000:00/0000:00:03.0
> > SysFS BusID: 0000:00: 03.0
> > Hardware Class: bridge
> > Model: "VIA PCI bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0xc364
> > Revision: 0x80
> > Driver: "pcieport-driver"
> > IRQ: 17 (no events)
> > Module Alias: "pci:v00001106d0000C364sv00000000sd00000000bc06sc0
> 4i00"
> > Driver Info #0:
> > Driver Status: shpchp is active
> > Driver Activation Cmd: "modprobe shpchp"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 28: PCI 11.0: 0601 ISA bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_3337
> > Unique ID: 7EWs.srXdOY83sLD
> > SysFS ID: /devices/pci0000:00/0000:00:11.0
> > SysFS BusID: 0000:00:11.0
> > Hardware Class: bridge
> > Model: "Biostar Microtech Int'l VT8237A PCI to ISA Bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x3337 "VT8237A PCI to ISA Bridge"
> > SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp"
> > SubDevice: pci 0x3206
> > Module Alias: "pci:v00001106d00003337sv00001565sd00003206bc06sc0
> 1i00"
> > Driver Info #0:
> > Driver Status: i2c_viapro is active
> > Driver Activation Cmd: "modprobe i2c_viapro"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 29: PCI 11.7: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_287e
> > Unique ID: BWxi.NhM1uBZ0XP5
> > SysFS ID: /devices/pci0000:00/0000:00: 11.7
> > SysFS BusID: 0000:00:11.7
> > Hardware Class: bridge
> > Model: "VIA VT8251 Ultra VLINK Controller"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x287e "VT8251 Ultra VLINK Controller"
> > SubVendor: pci 0x1106 "VIA Technologies, Inc."
> > SubDevice: pci 0x337e
> > Module Alias: "pci:v00001106d0000287Esv00001106sd0000337Ebc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 31: PCI 13.0: 0600 Host bridge
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_337b
> > Unique ID: HSco.jfGiUiN+dB5
> > SysFS ID: /devices/pci0000:00/0000:00:13.0
> > SysFS BusID: 0000:00:13.0
> > Hardware Class: bridge
> > Model: "VIA VT8237A PCI to PCIE Bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x337b "VT8237A PCI to PCIE Bridge"
> > Module Alias: "pci:v00001106d0000337Bsv00000000sd00000000bc06sc0
> 0i00"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> >
> > 32: PCI 13.1: 0604 PCI bridge (Subtractive decode)
> > [Created at pci.296]
> > UDI: /org/freedesktop/Hal/devices/pci_1106_337a
> > Unique ID: 9n5e.HHSMJjh6gC5
> > SysFS ID: /devices/pci0000:00/0000:00:13.1
> > SysFS BusID: 0000:00:13.1
> > Hardware Class: bridge
> > Model: "VIA VT8237A PCI to PCI Bridge"
> > Vendor: pci 0x1106 "VIA Technologies, Inc."
> > Device: pci 0x337a "VT8237A PCI to PCI Bridge"
> > Module Alias: "pci:v00001106d0000337Asv00000000sd00000000bc06sc0
> 4i01"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> > -- -- -- -- --
> > 00:00.0 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
> > 00:00.1 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
> > 00:00.2 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
> > 00:00.3 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
> > 00:00.4 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
> > 00:00.5 PIC: VIA Technologies, Inc. P4M900 I/O APIC Interrupt
> Controller
> > 00:00.6 Host bridge: VIA Technologies, Inc. P4M900 Security Device
> > 00:00.7 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
> > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> > 00: 02.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge
> > Controller (rev 80)
> > 00:03.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge
> > Controller (rev 80)
> > 00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 5337
> (rev 80)
> > 00:0f.1 IDE interface: VIA Technologies, Inc.
> > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
> > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev a0)
> > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev a0)
> > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev a0)
> > 00: 10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
> USB 1.1
> > Controller (rev a0)
> > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
> > 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK
> Controller
> > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
> > (rev 7c)
> > 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
> > 00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
> > 01:00.0 VGA compatible controller: VIA Technologies, Inc. Chrome9
> HC IGP
> > (rev 01)
> > 80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition
> Audio
> > Controller (rev 10)
> > -- -- -- -- --
> > # xorg.conf (xorg X Window System server configuration file)
> > #
> > # This file was generated by failsafeDexconf, using
> > # values from the debconf database and some overrides to use vesa
> mode.
> > #
> > # You should use dexconf or another such tool for creating a "real"
> > xorg.conf
> > # For example:
> > # sudo dpkg-reconfigure -phigh xserver-xorg
> > Section "Files"
> > EndSection
> >
> > Section "Module"
> > Load "glx"
> > Load "GLcore"
> > Load "v4l"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Generic Keyboard"
> > Driver "kbd"
> > Option "CoreKeyboard"
> > Option "XkbRules" "xorg"
> > Option "XkbModel" "pc105"
> > Option "XkbLayout" "us"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Configured Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/input/mice"
> > Option "Protocol" "ImPS/2"
> > Option "ZAxisMapping" "4 5"
> > Option "Emulate3Buttons" "true"
> > EndSection
> >
> > Section "Device"
> > Identifier "Failsafe Device"
> > Boardname "vesa"
> > Busid "PCI:1:0:0"
> > Driver "openchrome"
> > Screen 0
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Failsafe Monitor"
> > Vendorname "Acer"
> > Modelname "Acer AL1914"
> > Horizsync 30.0-83.0
> > Vertrefresh 55.0-75.0
> > modeline "640x480 at 60" 25.2 640 656 752 800 480 490 492 525 -vsync
> -hsync
> > modeline "640x480 at 72" 31.5 640 664 704 832 480 489 491 520 -vsync
> -hsync
> > modeline "640x480 at 75" 31.5 640 656 720 840 480 481 484 500 -vsync
> -hsync
> > modeline "800x600 at 56" 36.0 800 824 896 1024 600 601 603 625
> +hsync +vsync
> > modeline "800x600 at 72" 50.0 800 856 976 1040 600 637 643 666
> +hsync +vsync
> > modeline "800x600 at 75" 49.5 800 816 896 1056 600 601 604 625
> +hsync +vsync
> > modeline "800x600 at 60" 40.0 800 840 968 1056 600 601 605 628
> +hsync +vsync
> > modeline "832x624 at 75" 57.284 832 864 928 1152 624 625 628 667
> -vsync -hsync
> > modeline "1024x768 at 75" 78.8 1024 1040 1136 1312 768 769 772 800
> +hsync
> > +vsync
> > modeline " 1024x768 at 70" 75.0 1024 1048 1184 1328 768 771 777 806
> -vsync
> > -hsync
> > modeline "1024x768 at 60" 65.0 1024 1048 1184 1344 768 771 777 806
> -vsync
> > -hsync
> > modeline "1152x864 at 75" 108.0 1152 1216 1344 1600 864 865 868 900
> +hsync
> > +vsync
> > modeline "1280x1024 at 75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync +vsync
> > modeline "1280x960 at 60" 102.1 1280 1360 1496 1712 960 961 964 994
> -hsync
> > +vsync
> > modeline "1280x1024 at 60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync +vsync
> > modeline "1280x960 at 75" 129.86 1280 1368 1504 1728 960 961 964 1002
> > -hsync +vsync
> > modeline "1400x1050 at 60" 122.61 1400 1488 1640 1880 1050 1051 1054
> 1087
> > -hsync +vsync
> > modeline "1400x1050 at 75" 155.85 1400 1496 1648 1896 1050 1051 1054
> 1096
> > -hsync +vsync
> > modeline "1600x1200 at 65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250
> > +hsync +vsync
> > modeline "1600x1200 at 60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250
> > +hsync +vsync
> > modeline "1792x1344 at 60 " 204.8 1792 1920 2120 2448 1344 1345 1348
> 1394
> > -hsync +vsync
> > Gamma 1.0
> > EndSection
> >
> > Section "Screen"
> > Identifier "Default Screen"
> > Device "Failsafe Device"
> > Monitor "Failsafe Monitor"
> > Defaultdepth 24
> > SubSection "Display"
> > Depth 24
> > Virtual 1792 1344
> > Modes "1024x768 at 75 " "1024x768 at 70" "832x624 at 75" "1024x768 at 60"
> > "800x600 at 60" "1152x864 at 75 " "800x600 at 75" "1280x1024 at 75" "800x600 at 72"
> > "1280x960 at 60 " "800x600 at 56" "1280x1024 at 60" "640x480 at 75" "1280x960 at 75"
> > "640x480 at 72" " 1400x1050 at 60" "640x480 at 60" "1400x1050 at 75"
> "1600x1200 at 65 "
> > "1600x1200 at 60" "1792x1344 at 60"
> > EndSubSection
> > EndSection
> >
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > screen 0 "Default Screen" 0 0
> > Inputdevice "Generic Keyboard"
> > Inputdevice "Configured Mouse"
> > EndSection
> > Section "ServerFlags"
> > EndSection
> >
> >
> >
> ------------------------------------------------------------------------
>
>
>
> Hi Richard,
>
> I assume that you are using my Ubuntu openchrome-stable.sh script from
> the ubuntu forum topic
>
> I advise you to backup your xorg.conf file and delete the ones you have
> now. Then run sudo dpkg-reconfigure -phigh xserver-xorg. Make sure you
> select the openchrome driver.
>
> Then restart your computer. If this does not work then sent us a email
> with the following files compressed and included as attacement!
> /var/log/Xorg.0.log
> /etc/X11/xorg.conf
>
> Best regards,
>
> Jelle (TuxCrafter)
>
>
More information about the Openchrome-users
mailing list