[Openchrome-users] Resolution
Crash
userforum
Mon Jan 21 12:03:51 PST 2008
Re: Resolution
> Crash wrote:
> > Resolution
> > Xorg-log shows ->
> > (II) CHROME(0): Not using mode "1280x800" (no mode of this name)
> >
> > Is there any way to get openchrome use this resolution?
> > I tried modelines but didnt work...
> > thanks
> >
> No way to tell with so little informations. Please provide your
> xorg.conf and the full xorg log (compressed).
>
> Btw, you didn't answer to my last mail asking for basically the same
> informations.
> http://wiki.openchrome.org/pipermail/openchrome-users/2008-January/004038.html
>
> Regards,
> Xavier
>
oki here you go..
Xorg.0.log:
(II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, P4M800Pro/VN800/CN700,
K8M890/K8N890, P4M900/VN896/CN896, CX700/VX700, P4M890
(II) Primary Device is: PCI 01:00:0
(--) Chipset P4M900/VN896/CN896 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support, refer to http://www.openchrome.org/.
(!!) (development build, compiled on So 20 Jan 2008 12:28:46 CET)
...
(II) Setting vga for screen 0.
(II) CHROME(0): VIAPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) CHROME(0): VIAGetRec
(**) CHROME(0): Depth 16, (--) framebuffer bpp 16
(==) CHROME(0): RGB weight 565
(==) CHROME(0): Default visual is TrueColor
(--) CHROME(0): Chipset: P4M900/VN896/CN896
(--) CHROME(0): Chipset revision: 0
(--) CHROME(0): Probed amount of VideoRAM = 131072 kB
(II) CHROME(0): Setting up default chipset options.
(II) CHROME(0): VIASetupDefaultOptions
(II) CHROME(0): Reading config file...
(**) CHROME(0): Option "VBEModes" "true"
(**) CHROME(0): Option "SWCursor" "on"
(**) CHROME(0): Option "ActiveDevice" "LCD"
(**) CHROME(0): Option "ForcePanel" "On"
(**) CHROME(0): Option "EnableAGPDMA" "on"
(II) CHROME(0): Starting to parse config file options...
(==) CHROME(0): ShadowFB is disabled.
(==) CHROME(0): Acceleration is enabled.
(==) CHROME(0): Using XAA acceleration architecture.
(**) CHROME(0): Using software cursors.
(==) CHROME(0): GPU virtual command queue will be enabled.
(==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
(**) CHROME(0): AGP DMA will be enabled if DRI is enabled.
(==) CHROME(0): AGP DMA will be used for 2D acceleration.
(==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
(**) CHROME(0): Will enable VBE modes.
(==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
(==) CHROME(0): Xv Bandwidth check is enabled.
(==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
(==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
(==) CHROME(0): Digital output bus width is 12 bits.
(==) CHROME(0): DVI Center is disabled.
(==) CHROME(0): Panel size is not selected from config file.
(**) CHROME(0): Panel will be forced.
(==) CHROME(0): TV dotCrawl is disabled.
(==) CHROME(0): TV deflicker is set to 0.
(==) CHROME(0): No default TV type is set.
(==) CHROME(0): No default TV output signal type is set.
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xc9000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xc9200000 with size 0x20000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) CHROME(0): Will not print VGA registers.
(==) CHROME(0): Will not scan I2C buses.
(II) CHROME(0): ...Finished parsing config file options.
(--) CHROME(0): Detected Medion Notebook MD96483.
(II) CHROME(0): Detected MemClk 8
(II) CHROME(0): ViaGetMemoryBandwidth
(II) CHROME(0): Detected TV standard: PAL.
(==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) CHROME(0): ViaI2CInit
(II) CHROME(0): ViaI2CBus1Init
(II) CHROME(0): I2C bus "I2C bus 1" initialized.
(II) CHROME(0): ViaI2cBus2Init
(II) CHROME(0): I2C bus "I2C bus 2" initialized.
(II) CHROME(0): ViaI2CBus3Init
(II) CHROME(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) CHROME(0): I2C device "I2C bus 1:ddc2" removed.
(II) CHROME(0): ViaOutputsDetect
(II) CHROME(0): Enabling panel from config.
(II) CHROME(0): Will not try to detect TV encoder.
(II) CHROME(0): ViaOutputsSelect
(II) CHROME(0): ViaOutputsSelect: X Configuration: 0x02
(II) CHROME(0): ViaOutputsSelect: BIOS Initialised register: 0x07
(II) CHROME(0): ViaOutputsSelect: Panel.
(WW) CHROME(0): Panel on K8M800, PM800, VM800, P4M890, K8M890, CX700 or P4M900 is currently not supported.
(WW) CHROME(0): Using VBE to set modes to work around this.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) CHROME(0): initializing int10
(II) CHROME(0): Primary V_BIOS segment is: 0xc000
(II) CHROME(0): VESA BIOS detected
(II) CHROME(0): VESA VBE Version 3.0
(II) CHROME(0): VESA VBE Total Mem: 131072 kB
(II) CHROME(0): VESA VBE OEM: VIA N3364
(II) CHROME(0): VESA VBE OEM Software Rev: 1.0
(II) CHROME(0): VESA VBE OEM Vendor:
(II) CHROME(0): VESA VBE OEM Product:
(II) CHROME(0): VESA VBE OEM Product Rev:
(II) CHROME(0): Searching for matching VESA mode(s):
....
(II) CHROME(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) CHROME(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(II) CHROME(0): Not using mode "1280x800" (no mode of this name)
(II) CHROME(0): Not using built-in mode "1600x1200" (width too large for virtual size)
(II) CHROME(0): Not using built-in mode "1400x1050" (width too large for virtual size)
(II) CHROME(0): Not using built-in mode "1280x1024" (width too large for virtual size)
(II) CHROME(0): Not using built-in mode "1280x960" (width too large for virtual size)
(II) CHROME(0): Attempting to use 60Hz refresh for mode "800x600" (114)
(II) CHROME(0): Attempting to use 60Hz refresh for mode "640x480" (111)
(--) CHROME(0): Virtual size is 1024x768 (pitch 1024)
(**) CHROME(0): *Built-in mode "1024x768"
(**) CHROME(0): Built-in mode "800x600": 0.0 MHz, 37879.3 kHz, 60.8 Hz
(II) CHROME(0): Modeline "800x600"x60.8 0.00 800 0 0 0 600 0 0 0 (37879.3 kHz)
(**) CHROME(0): Built-in mode "640x480": 0.0 MHz, 31469.2 kHz, 60.4 Hz
(II) CHROME(0): Modeline "640x480"x60.4 0.00 640 0 0 0 480 0 0 0 (31469.2 kHz)
(==) CHROME(0): DPI set to (75, 75)
...
(II) CHROME(0): VIALoadPalette
(WW) CHROME(0): VIALoadPalette: Function not implemented for this chipset.
..
enough?
Xorg.conf is attached..thanks
----
Reply Link: <http://wiki.openchrome.org/tikiwiki/tiki-view_forum_thread.php?forumId=1&comments_reply_threadId=4610&comments_parentId=3709&post_reply=1#form>
More information about the Openchrome-users
mailing list