[Openchrome-users] Problem getting Xorg to run on Fedora Core 12

George R. Kasica georgek
Fri Mar 12 16:16:22 PST 2010


OK, first off this was working on FC10 and no hardware has changed
here, only the FC10 to 12 upgrade...I've got the latest updates and
fixes as of today 3/12 via a nightly yum run, but this has been broken
since upgrade about a few days after release. I can run the server
without X in init level 3 but it would be really nice it have my X
sessions back....what am I doing wrong here, I'm totally stumped....

Hardware is as follows:

2 CPU's Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
4GB RAM
Linux agpgart interface v0.103
agpgart: Detected VIA P4M800 chipset

Display is a Dell ST2310 which windows-7 or 2003 runs well at
1600x1200 @ 60Hx and has a max resolution of 1920x1080 @ 60Hz per the
menu on the screen...docs don't list any more info.

here is the log of the setup and attempt to configure and run X from a
root command prompt with

and the config below it.

Xorg -configure

then 

X -config /root/xorg.conf.new



# more /var/log/Xorg.0.log
===========================
 
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: x86-04 2.6.18-164.6.1.el5 
Current Operating System: Linux saturn.fcst-office.com
2.6.31.12-174.2.22.fc12.i
686 #1 SMP Fri Feb 19 19:26:06 UTC 2010 i686
Kernel command line: ro root=LABEL=/root rhgb quiet resume=/dev/sda2
SYSFONT=lat
arcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rootfstype=ext4
Build Date: 16 February 2010  04:33:31AM
Build ID: xorg-x11-server 1.7.5-1.fc12 
Current version of pixman: 0.16.6
        Before reporting problems, check
http://bodhi.fedoraproject.org/
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar  2 18:10:39 2010
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
        catalogue:/etc/X11/fontpath.d,
        built-ins,
        catalogue:/etc/X11/fontpath.d,
        built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' wi
ll be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x821c900
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(--) using VT number 7
 
(--) PCI:*(0:1:0:0) 1106:7205:1462:7071 VIA Technologies, Inc.
KM400/KN400/P4M80
0 [S3 UniChrome] rev 1, Mem @ 0xf0000000/67108864,
0xf4000000/16777216, BIOS @ 0
x????????/65536
(II) "extmod" will be loaded. This was enabled by default and also
specified in 
the config file.
(II) "dbe" will be loaded. This was enabled by default and also
specified in the
 config file.
(II) "glx" will be loaded. This was enabled by default and also
specified in the
 config file.
(II) "record" will be loaded. This was enabled by default and also
specified in 
the config file.
(II) "dri" will be loaded. This was enabled by default and also
specified in the
 config file.
(II) "dri2" will be loaded. This was enabled by default and also
specified in th
e config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vnc"
(II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
dlopen: /usr/lib/xorg/modules/extensions/libvnc.so: undefined symbol:
CoreDevice
PrivateKey
(EE) Failed to load /usr/lib/xorg/modules/extensions/libvnc.so
(II) UnloadModule: "vnc"
(EE) Failed to load module "vnc" (loader failed, 7)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "openchrome"
(II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
(II) Module openchrome: vendor="http://openchrome.org/"
        compiled for 1.7.0, module version = 0.2.904
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
        K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
        K8M890/K8N890, P4M900/VN896/CN896, CX700/VX700, P4M890, VX800,
VX855
(II) Primary Device is: PCI 01 at 00:00:0
(!!) VIA Technologies does not support this driver in any way.
(!!) For support, please refer to http://www.openchrome.org/.
(!!) (openchrome 0.2.904 release)
(II) CHROME(0): VIAPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.7.5, module version = 0.1.0
        ABI class: X.Org Video Driver, version 6.0
(II) CHROME(0): VIAGetRec
(==) CHROME(0): Depth 24, (--) framebuffer bpp 32
(==) CHROME(0): RGB weight 888
(==) CHROME(0): Default visual is TrueColor
(--) CHROME(0): Chipset: KM400/KN400
(--) CHROME(0): Chipset revision: 0
(--) CHROME(0): Probed amount of VideoRAM = 1024 kB
(II) CHROME(0): Setting up default chipset options.
(II) CHROME(0): VIASetupDefaultOptions
(II) CHROME(0): Reading config file...
(II) CHROME(0): Starting to parse config file options...
(==) CHROME(0): Shadow framebuffer is disabled.
(==) CHROME(0): Hardware acceleration is enabled.
(==) CHROME(0): Using XAA acceleration architecture.
(==) CHROME(0): Using hardware two-color cursors and software
full-color cursors
.
(==) CHROME(0): GPU virtual command queue will be enabled.
(==) CHROME(0): DRI IRQ will be disabled if DRI is enabled.
(==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
(==) CHROME(0): AGP DMA will be used for 2D acceleration.
(==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is
enabled.
(==) CHROME(0): Will not enable VBE modes.
(==) CHROME(0): VBE VGA register save & restore will not be used
        if VBE modes are enabled.
(==) CHROME(0): Xv Bandwidth check is enabled.
(==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
(==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
(==) CHROME(0): Digital output bus width is 12 bits.
(==) CHROME(0): DVI Center is disabled.
(==) CHROME(0): Panel size is not selected from config file.
(==) CHROME(0): Panel will not be forced.
(==) CHROME(0): TV dotCrawl is disabled.
(==) CHROME(0): TV deflicker is set to 0.
(==) CHROME(0): No default TV type is set.
(==) CHROME(0): No default TV output signal type is set.
(==) CHROME(0): No default TV output port is set.
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xf4000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xf4200000 with size 0x200000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
is 0x0000
(==) CHROME(0): Will not print VGA registers.
(==) CHROME(0): Will not scan I2C buses.
(II) CHROME(0): ...Finished parsing config file options.
(--) CHROME(0): Detected MSI PM8M2-V. Card-Ids (1462|7071)
(II) CHROME(0): Detected MemClk 4
(II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 4
(II) CHROME(0): Detected TV standard: NTSC.
(==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) CHROME(0): ViaI2CInit
(II) CHROME(0): ViaI2CBus1Init
(II) CHROME(0): I2C bus "I2C bus 1" initialized.
(II) CHROME(0): ViaI2cBus2Init
(II) CHROME(0): I2C bus "I2C bus 2" initialized.
(II) CHROME(0): ViaI2CBus3Init
(II) CHROME(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address
0xA0.
(II) CHROME(0): ViaOutputsDetect
(II) CHROME(0): VIATVDetect
(II) CHROME(0): ViaOutputsSelect
(II) CHROME(0): ViaOutputsSelect: X Configuration: 0x00
(II) CHROME(0): ViaOutputsSelect: BIOS Initialised register: 0x00
(II) CHROME(0): ViaOutputsSelect: CRT.
(II) CHROME(0): ViaModesAttach
(II) CHROME(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) CHROME(0): Monitor0: Using default vrefresh range of 50.00-70.00
Hz
(WW) CHROME(0): Unable to estimate virtual size
(II) CHROME(0): Clock range:  20.00 to 230.00 MHz
(II) CHROME(0): ViaValidMode: Validating 640x350 (Clock: 31500)
(II) CHROME(0): ViaFirstCRTCModeValid
(II) CHROME(0): ViaComputeDotClock 31500 : c558 : 050b
(II) CHROME(0): Not using default mode "640x350" (vrefresh out of
range)
(II) CHROME(0): Not using default mode "320x175" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): ViaValidMode: Validating 640x400 (Clock: 31500)
(II) CHROME(0): ViaFirstCRTCModeValid
(II) CHROME(0): ViaComputeDotClock 31500 : c558 : 050b
(II) CHROME(0): Not using default mode "640x400" (vrefresh out of
range)
(II) CHROME(0): Not using default mode "320x200" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "720x400" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "360x200" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "640x480" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "320x240" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "640x480" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "320x240" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "640x480" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "320x240" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "640x480" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "320x240" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "400x300" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "400x300" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "400x300" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "400x300" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "400x300" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "512x384" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "512x384" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "512x384" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "512x384" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "512x384" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1152x864" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "576x432" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1280x960" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "640x480" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1280x960" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "640x480" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1280x1024" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "640x512" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1280x1024" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "640x512" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1280x1024" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "640x512" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1600x1200" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1600x1200" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1600x1200" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1600x1200" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1600x1200" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "800x600" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1792x1344" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "896x672" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1792x1344" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "896x672" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1856x1392" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "928x696" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1856x1392" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "928x696" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1920x1440" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "960x720" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1920x1440" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "960x720" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "832x624" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "416x312" (bad mode
clock/interlace/doubl
escan)
(II) CHROME(0): Not using default mode "1400x1050" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "700x525" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1400x1050" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "700x525" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "1920x1440" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "960x720" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "2048x1536" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "2048x1536" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) CHROME(0): Not using default mode "2048x1536" (insufficient
memory for mode
)
(II) CHROME(0): Not using default mode "1024x768" (insufficient memory
for mode)
(WW) CHROME(0): Mode pool is empty
(EE) CHROME(0): No valid modes found
(II) CHROME(0): VIAFreeRec
(II) CHROME(0): VIAUnmapMem
(II) CHROME(0): VIAFreeScreen
(II) CHROME(0): VIAFreeRec
(II) UnloadModule: "openchrome"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules/libvgahw.so
(EE) Screen(s) found, but none have a usable configuration.
 
Fatal server error:
no screens found
 
Please consult the Fedora Project support 
         at http://bodhi.fedoraproject.org/
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.



# cat xorg.conf.new 
======================
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
 
Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "catalogue:/etc/X11/fontpath.d"
        FontPath     "built-ins"
EndSection
 
Section "Module"
        Load  "dri2"
        Load  "vnc"
        Load  "record"
        Load  "dbe"
        Load  "extmod"
        Load  "dri"
        Load  "glx"
EndSection
 
Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection
 
Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection
 
Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection
 
Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "PrintVGARegs"              # [<bool>]
        #Option     "PrintTVRegs"               # [<bool>]
        #Option     "I2CScan"                   # [<bool>]
        #Option     "VBEModes"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "AccelMethod"               # <str>
        #Option     "ExaNoComposite"            # [<bool>]
        #Option     "ExaScratchSize"            # <i>
        #Option     "SWCursor"                  # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoRAM"                  # <i>
        #Option     "ActiveDevice"              # [<str>]
        #Option     "BusWidth"                  # [<str>]
        #Option     "Center"                    # [<bool>]
        #Option     "PanelSize"                 # [<str>]
        #Option     "ForcePanel"                # [<bool>]
        #Option     "TVDotCrawl"                # [<bool>]
        #Option     "TVDeflicker"               # <i>
        #Option     "TVType"                    # [<str>]
        #Option     "TVOutput"                  # [<str>]
        #Option     "TVPort"                    # [<str>]
        #Option     "DisableVQ"                 # [<bool>]
        #Option     "DisableIRQ"                # [<bool>]
        #Option     "EnableAGPDMA"              # [<bool>]
        #Option     "NoAGPFor2D"                # [<bool>]
        #Option     "NoXVDMA"                   # [<bool>]
        #Option     "VbeSaveRestore"            # [<bool>]
        #Option     "DisableXvBWCheck"          # [<bool>]
        #Option     "ModeSwitchMethod"          # [<str>]
        #Option     "MaxDRIMem"                 # <i>
        #Option     "AGPMem"                    # <i>
        Identifier  "Card0"
        Driver      "openchrome"
        VendorName  "VIA Technologies, Inc."
        BoardName   "KM400/KN400/P4M800 [S3 UniChrome]"
        BusID       "PCI:1:0:0"
EndSection
 
Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection


-- 
===[George R. Kasica]===        +1 262 677 0766
President                       +1 206 374 6482 FAX 
Netwrx Consulting Inc.          Jackson, WI USA 
http://www.netwrx1.com
georgek at netwrx1.com
ICQ #12862186




More information about the Openchrome-users mailing list