[Openchrome-users] garbled display

[Konstantin Svist]

On 08/09/2011 12:45 PM, Konstantin Svist wrote:
> On 08/09/2011 01:15 AM, Xavier Bachelot wrote:
>> On 08/09/2011 02:04 AM, Konstantin Svist wrote:
>>> I have a box with a via chip (cx700). LVDS panel is at 800x480.
>>> Booting into Fedora results in a garbled display (Fedora 15 xrandr
>>> reports the resolution is set at 1024x768, I can't seem to be able to
>>> set it to anything else)
>>> The distortion is similar to this one:
>>> http://img249.imageshack.us/img249/495/20100423.jpg (though there is no
>>> cursor visible)
>>>
>>> lspci -v is here:
>>> http://permalink.gmane.org/gmane.linux.drivers.unichrome.devel/922
>>>
>>> There is no xorg.conf (Fedora stopped using it by default)
>>>
>> I'd try to both use ForcePanel and PanelSize options.
>> You need to create an /etc/X11/xorg.conf file with only a device 
>> section :
>>
>> Section "Device"
>>           Identifier  "Card0"
>>           Driver      "openchrome"
>>           Option      "ForcePanel"
>>           Option      "PanelSize" "800x480"
>> EndSection
>>
>> I'm not sure such a partial xorg conf will work, but in case it's not
>> just follow the doc in the link below to create a conf file and add the
>> 2 Option lines.
>>
>> https://fedoraproject.org/wiki/How_to_create_xorg.conf
>>
>> Also please provide your xorg log (and please compress it so it'll not
>> hit the mailing list size limit).
>
> Wow, that's the closest I've seen it to working! Not quite there yet, 
> though -- see http://i.imgur.com/Z5kVg.jpg
>
> Xorg.0.log is attached (don't mind screen1 and screen2; screen0 is the 
> only one attached)
>


So uhh.. what's the next step? I'd like to get the screen working, if at 
all possible