[Openchrome-users] VGA output is disable
Filip Dvořák
fila
Wed Aug 1 15:56:48 PDT 2012
Without xorg.conf it is the same result. Monitor has not signal.
logs:
[ 15.739]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 15.739] X Protocol Version 11, Revision 0
[ 15.739] Build Operating System: Linux 3.4.4-3-ARCH i686
[ 15.739] Current Operating System: Linux recepce 3.0.38-1-lts #1 SMP
PREEMPT Fri Jul 20 06:30:55 UTC 2012 i686
[ 15.740] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts
root=UUID=75fda088-c708-4274-b182-532e50add9e3 ro quiet
[ 15.740] Build Date: 09 July 2012 04:03:16PM
[ 15.740]
[ 15.740] Current version of pixman: 0.26.2
[ 15.740] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.740] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.741] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 2
00:41:07 2012
[ 15.780] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.812] (==) No Layout section. Using the first Screen section.
[ 15.812] (==) No screen section available. Using defaults.
[ 15.812] (**) |-->Screen "Default Screen Section" (0)
[ 15.812] (**) | |-->Monitor "<default monitor>"
[ 15.821] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.821] (==) Automatically adding devices
[ 15.821] (==) Automatically enabling devices
[ 15.884] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.884] Entry deleted from font path.
[ 15.884] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.884] Entry deleted from font path.
[ 15.911] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 15.911] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.911] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 15.911] (II) Loader magic: 0x82235a0
[ 15.911] (II) Module ABI versions:
[ 15.911] X.Org ANSI C Emulation: 0.4
[ 15.911] X.Org Video Driver: 12.0
[ 15.911] X.Org XInput driver : 16.0
[ 15.911] X.Org Server Extension : 6.0
[ 15.915] (--) PCI:*(0:1:0:0) 1106:3344:1462:7104 rev 1, Mem @
0xf0000000/67108864, 0xfb000000/16777216, BIOS @ 0x????????/65536
[ 15.915] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file
or directory)
[ 15.915] (II) LoadModule: "extmod"
[ 15.919] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.948] (II) Module extmod: vendor="X.Org Foundation"
[ 15.948] compiled for 1.12.3, module version = 1.0.0
[ 15.948] Module class: X.Org Server Extension
[ 15.948] ABI class: X.Org Server Extension, version 6.0
[ 15.948] (II) Loading extension MIT-SCREEN-SAVER
[ 15.948] (II) Loading extension XFree86-VidModeExtension
[ 15.948] (II) Loading extension XFree86-DGA
[ 15.948] (II) Loading extension DPMS
[ 15.948] (II) Loading extension XVideo
[ 15.948] (II) Loading extension XVideo-MotionCompensation
[ 15.948] (II) Loading extension X-Resource
[ 15.948] (II) LoadModule: "dbe"
[ 15.949] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.963] (II) Module dbe: vendor="X.Org Foundation"
[ 15.963] compiled for 1.12.3, module version = 1.0.0
[ 15.964] Module class: X.Org Server Extension
[ 15.964] ABI class: X.Org Server Extension, version 6.0
[ 15.964] (II) Loading extension DOUBLE-BUFFER
[ 15.964] (II) LoadModule: "glx"
[ 15.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.990] (II) Module glx: vendor="X.Org Foundation"
[ 15.990] compiled for 1.12.3, module version = 1.0.0
[ 15.990] ABI class: X.Org Server Extension, version 6.0
[ 15.990] (==) AIGLX enabled
[ 15.991] (II) Loading extension GLX
[ 15.991] (II) LoadModule: "record"
[ 15.991] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.992] (II) Module record: vendor="X.Org Foundation"
[ 15.993] compiled for 1.12.3, module version = 1.13.0
[ 15.993] Module class: X.Org Server Extension
[ 15.993] ABI class: X.Org Server Extension, version 6.0
[ 15.993] (II) Loading extension RECORD
[ 15.993] (II) LoadModule: "dri"
[ 15.993] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.004] (II) Module dri: vendor="X.Org Foundation"
[ 16.004] compiled for 1.12.3, module version = 1.0.0
[ 16.004] ABI class: X.Org Server Extension, version 6.0
[ 16.004] (II) Loading extension XFree86-DRI
[ 16.004] (II) LoadModule: "dri2"
[ 16.004] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.006] (II) Module dri2: vendor="X.Org Foundation"
[ 16.006] compiled for 1.12.3, module version = 1.2.0
[ 16.006] ABI class: X.Org Server Extension, version 6.0
[ 16.006] (II) Loading extension DRI2
[ 16.006] (==) Matched openchrome as autoconfigured driver 0
[ 16.006] (==) Matched vesa as autoconfigured driver 1
[ 16.006] (==) Matched fbdev as autoconfigured driver 2
[ 16.006] (==) Assigned the driver to the xf86ConfigLayout
[ 16.006] (II) LoadModule: "openchrome"
[ 16.062] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[ 16.099] (II) Module openchrome: vendor="http://openchrome.org/"
[ 16.100] compiled for 1.12.3, module version = 0.3.0
[ 16.100] Module class: X.Org Video Driver
[ 16.100] ABI class: X.Org Video Driver, version 12.0
[ 16.100] (II) LoadModule: "vesa"
[ 16.101] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 16.118] (II) Module vesa: vendor="X.Org Foundation"
[ 16.118] compiled for 1.12.3, module version = 2.3.2
[ 16.118] Module class: X.Org Video Driver
[ 16.118] ABI class: X.Org Video Driver, version 12.0
[ 16.118] (II) LoadModule: "fbdev"
[ 16.119] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 16.125] (II) Module fbdev: vendor="X.Org Foundation"
[ 16.125] compiled for 1.12.2, module version = 0.4.3
[ 16.125] Module class: X.Org Video Driver
[ 16.125] ABI class: X.Org Video Driver, version 12.0
[ 16.125] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
VX855/VX875, VX900
[ 16.125] (II) VESA: driver for VESA chipsets: vesa
[ 16.125] (II) FBDEV: driver for framebuffer: fbdev
[ 16.126] (++) using VT number 7
[ 16.172] (!!) VIA Technologies does not support this driver in any way.
[ 16.172] (!!) For support, please refer to http://www.openchrome.org/.
[ 16.172] (!!) (openchrome 0.3.0 release)
[ 16.172] (WW) Falling back to old probe method for vesa
[ 16.172] (WW) Falling back to old probe method for fbdev
[ 16.172] (II) Loading sub module "fbdevhw"
[ 16.172] (II) LoadModule: "fbdevhw"
[ 16.173] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 16.179] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.179] compiled for 1.12.3, module version = 0.0.2
[ 16.179] ABI class: X.Org Video Driver, version 12.0
[ 16.179] (II) CHROME(0): VIAPreInit
[ 16.179] (II) CHROME(0): VIAGetRec
[ 16.180] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700
[ 16.180] (--) CHROME(0): Chipset revision: 0
[ 16.180] drmOpenDevice: node name is /dev/dri/card0
[ 16.284] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 16.285] drmOpenDevice: node name is /dev/dri/card0
[ 16.285] drmOpenDevice: open result is 9, (OK)
[ 16.285] drmOpenByBusid: drmOpenMinor returns 9
[ 16.285] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 16.286] (II) [drm] KMS not enabled
[ 16.286] (II) CHROME(0): [drm] via interface version: 2.11.1
[ 16.286] (II) CHROME(0): DRI 1 api supported
[ 16.296] (II) Loading sub module "vgahw"
[ 16.297] (II) LoadModule: "vgahw"
[ 16.297] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 16.299] (II) Module vgahw: vendor="X.Org Foundation"
[ 16.299] compiled for 1.12.3, module version = 0.1.0
[ 16.299] ABI class: X.Org Video Driver, version 12.0
[ 16.299] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[ 16.299] (II) CHROME(0): VIAMapMMIO
[ 16.300] (--) CHROME(0): mapping MMIO @ 0xfb000000 with size 0xd000
[ 16.300] (--) CHROME(0): mapping BitBlt MMIO @ 0xfb200000 with size
0x200000
[ 16.301] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 16.301] (II) CHROME(0): VIAMapFB
[ 16.301] (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size
0x4000000
[ 16.315] (--) CHROME(0): Frame buffer start: 0xb2f29000, free start:
0x0 end: 0x4000000
[ 16.315] (II) CHROME(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.315] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 16.315] (==) CHROME(0): RGB weight 888
[ 16.315] (==) CHROME(0): Default visual is TrueColor
[ 16.315] (II) CHROME(0): VIASetupDefaultOptions - Setting up default
chipset options.
[ 16.316] (==) CHROME(0): Shadow framebuffer is disabled.
[ 16.316] (==) CHROME(0): Hardware acceleration is enabled.
[ 16.316] (==) CHROME(0): Using EXA acceleration architecture.
[ 16.316] (==) CHROME(0): EXA composite acceleration disabled.
[ 16.316] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 16.316] (==) CHROME(0): Using hardware two-color cursors and software
full-color cursors.
[ 16.316] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 16.316] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 16.316] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[ 16.316] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[ 16.316] (==) CHROME(0): PCI DMA will be used for XV image transfer if
DRI is enabled.
[ 16.316] (==) CHROME(0): Will not enable VBE modes.
[ 16.316] (==) CHROME(0): VBE VGA register save & restore will not be
used
if VBE modes are enabled.
[ 16.316] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 16.316] (==) CHROME(0): Will not impose a limit on video RAM reserved
for DRI.
[ 16.316] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 16.316] (==) CHROME(0): TV dotCrawl is disabled.
[ 16.317] (==) CHROME(0): TV deflicker is set to 0.
[ 16.317] (==) CHROME(0): No default TV type is set.
[ 16.317] (==) CHROME(0): No default TV output signal type is set.
[ 16.317] (==) CHROME(0): No default TV output port is set.
[ 16.317] (==) CHROME(0): Will not print VGA registers.
[ 16.317] (==) CHROME(0): Will not scan I2C buses.
[ 16.317] (II) CHROME(0): ...Finished parsing config file options.
[ 16.317] (--) CHROME(0): Detected MSI PM8M-V. Card-Ids (1462|7104)
[ 16.317] (II) CHROME(0): Detected MemClk 6
[ 16.317] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 6
[ 16.317] (II) CHROME(0): Detected TV standard: NTSC.
[ 16.317] (II) Loading sub module "ramdac"
[ 16.317] (II) LoadModule: "ramdac"
[ 16.317] (II) Module "ramdac" already built-in
[ 16.317] (II) Loading sub module "i2c"
[ 16.318] (II) LoadModule: "i2c"
[ 16.318] (II) Module "i2c" already built-in
[ 16.318] (II) CHROME(0): ViaI2CInit
[ 16.318] (II) CHROME(0): ViaI2CBus1Init
[ 16.318] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[ 16.318] (II) CHROME(0): ViaI2cBus2Init
[ 16.318] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[ 16.318] (II) CHROME(0): ViaI2CBus3Init
[ 16.318] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[ 16.318] (II) Loading sub module "ddc"
[ 16.318] (II) LoadModule: "ddc"
[ 16.318] (II) Module "ddc" already built-in
[ 16.318] (II) CHROME(0): ViaOutputsDetect
[ 16.319] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
[ 16.319] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[ 16.319] (==) CHROME(0): LVDS Panel will not be forced.
[ 16.319] (==) CHROME(0): Panel size is not selected from config file.
[ 16.319] (II) CHROME(0): Output VGA-1 has no monitor section
[ 16.320] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at
address 0xA0.
[ 16.323] (II) CHROME(0): ViaDisplayDisableCRT
[ 16.323] (II) CHROME(0): EDID for output VGA-1
[ 16.323] (II) CHROME(0): Output VGA-1 disconnected
[ 16.323] (WW) CHROME(0): No outputs definitely connected, trying
again...
[ 16.323] (II) CHROME(0): Output VGA-1 disconnected
[ 16.323] (WW) CHROME(0): Unable to find connected outputs - setting
1024x768 initial framebuffer
[ 16.324] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 16.324] (==) CHROME(0): DPI set to (96, 96)
[ 16.324] (II) Loading sub module "fb"
[ 16.324] (II) LoadModule: "fb"
[ 16.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.366] (II) Module fb: vendor="X.Org Foundation"
[ 16.366] compiled for 1.12.3, module version = 1.0.0
[ 16.366] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.366] (II) Loading sub module "exa"
[ 16.367] (II) LoadModule: "exa"
[ 16.367] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 16.398] (II) Module exa: vendor="X.Org Foundation"
[ 16.398] compiled for 1.12.3, module version = 2.5.0
[ 16.398] ABI class: X.Org Video Driver, version 12.0
[ 16.398] (II) UnloadModule: "vesa"
[ 16.399] (II) Unloading vesa
[ 16.399] (II) UnloadModule: "fbdev"
[ 16.399] (II) Unloading fbdev
[ 16.399] (II) UnloadSubModule: "fbdevhw"
[ 16.399] (II) Unloading fbdevhw
[ 16.399] (--) Depth 24 pixmap format is 32 bpp
[ 16.399] (II) CHROME(0): VIAScreenInit
[ 16.400] drmOpenDevice: node name is /dev/dri/card0
[ 16.400] drmOpenDevice: open result is 9, (OK)
[ 16.400] drmOpenDevice: node name is /dev/dri/card0
[ 16.400] drmOpenDevice: open result is 9, (OK)
[ 16.400] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 16.400] drmOpenDevice: node name is /dev/dri/card0
[ 16.400] drmOpenDevice: open result is 9, (OK)
[ 16.401] drmOpenByBusid: drmOpenMinor returns 9
[ 16.401] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 16.401] (II) [drm] DRM interface version 1.4
[ 16.401] (II) [drm] DRM open master succeeded.
[ 16.401] (II) CHROME(0): [drm] Using the DRM lock SAREA also for
drawables.
[ 16.401] (II) CHROME(0): [drm] framebuffer handle = 0xf0000000
[ 16.402] (II) CHROME(0): [drm] added 1 reserved context for kernel
[ 16.402] (II) CHROME(0): X context handle = 0x1
[ 16.402] (II) CHROME(0): [drm] installed DRM signal handler
[ 16.402] (II) CHROME(0): [dri] visual configs initialized.
[ 16.402] (II) CHROME(0): [drm] register handle = 0xfb000000
[ 16.402] (II) CHROME(0): [drm] framebuffer handle = 0xf0000000
[ 16.403] (II) CHROME(0): [drm] mmio Registers = 0xfb000000
[ 16.403] (II) CHROME(0): [dri] mmio mapped.
[ 16.403] (II) CHROME(0): DRI1 ScreenInit commplete
[ 16.403] (II) CHROME(0): [drm] Detected AGP vendor 0x1106, device
0x0314
[ 16.403] (II) CHROME(0): [drm] Found AGP v3 compatible device. Trying
AGP 8X mode.
[ 16.403] (II) CHROME(0): [drm] Trying to enable AGP fast writes.
[ 16.467] (II) CHROME(0): [drm] drmAgpEnabled succeeded
[ 16.473] (II) CHROME(0): [drm] agpAddr = 0xf4000000
[ 16.473] (II) CHROME(0): [drm] agpSize = 0x01e00000
[ 16.473] (II) CHROME(0): [drm] agp physical addr = 0xb10ed000
[ 16.473] (II) CHROME(0): [dri] Using AGP.
[ 16.473] (II) CHROME(0): [drm] Using 65536 KB for DRM memory heap.
[ 16.473] (II) CHROME(0): [dri] Frame buffer initialized.
[ 16.473] (II) CHROME(0): [dri] Kernel data initialized.
[ 16.473] 3145728 bytes of DRI memory allocated at 0, handle 703552736
[ 16.473] 262144 bytes of DRI memory allocated at 300000, handle
4075772896
[ 16.474] 32 bytes of DRI memory allocated at 340000, handle 313481760
[ 16.474] 32 bytes of DRI memory allocated at 340020, handle 3685701920
[ 16.486] (II) CHROME(0): - Visuals set up
[ 16.497] (II) CHROME(0): - B & W
[ 16.499] (II) CHROME(0): [EXA] Disabling EXA accelerated composite.
[ 16.499] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[ 16.499] (II) EXA(0): Offscreen pixmap area of 63963136 bytes
[ 16.499] (II) EXA(0): Driver registered support for the following
operations:
[ 16.499] (II) Solid
[ 16.500] (II) Copy
[ 16.500] (II) DownloadFromScreen
[ 16.500] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[ 16.500] (==) CHROME(0): Backing store disabled
[ 16.500] (II) CHROME(0): - Backing store set up
[ 16.500] (II) CHROME(0): - SW cursor set up
[ 16.500] (II) CHROME(0): HWCursor ARGB enabled
[ 16.500] 16384 bytes of DRI memory allocated at 340040, handle
846157920
[ 16.500] 16384 bytes of DRI memory allocated at 344040, handle
2727303488
[ 16.500] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 16.501] (II) CHROME(0): - Def Color map set up
[ 16.501] (II) CHROME(0): - Palette loaded
[ 16.501] (II) CHROME(0): - Color maps etc. set up
[ 16.501] (==) CHROME(0): DPMS enabled
[ 16.501] (II) CHROME(0): - DPMS set up
[ 16.501] (II) CHROME(0): VIAEnterVT
[ 16.501] (II) CHROME(0): VIASave
[ 16.501] (II) CHROME(0): Primary
[ 16.503] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[ 16.503] (II) CHROME(0): Crtc...
[ 16.503] (II) CHROME(0): TVSave...
[ 16.503] (II) CHROME(0): VIASave
[ 16.503] (II) CHROME(0): Primary
[ 16.503] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[ 16.503] (II) CHROME(0): Crtc...
[ 16.503] (II) CHROME(0): TVSave...
[ 16.503] (II) CHROME(0): ViaDisplayDisableCRT
[ 16.504] (II) CHROME(0): ViaDisplayDisableCRT
[ 16.504] 16777216 bytes of DRI memory allocated at 348040, handle
4040121600
[ 16.504] (II) CHROME(0): [DRI] installation complete
[ 16.504] (II) CHROME(0): [drm] IRQ handler installed, using IRQ 16.
[ 16.505] (II) CHROME(0): [drm] Initialized AGP ring-buffer, size
0x200000 at AGP offset 0x1e00000.
[ 16.505] (II) CHROME(0): direct rendering enabled
[ 16.505] 4194304 bytes of DRI memory allocated at 0, handle 788922336
[ 16.505] (II) CHROME(0): Allocated 4096 kiB of AGP memory for EXA
scratch area.
[ 16.505] (II) CHROME(0): [Xv] Using PCI DMA for Xv image transfer.
[ 16.505] 635904 bytes of DRI memory allocated at 1348040, handle
1285947200
[ 16.507] (II) CHROME(0): Benchmarking video copy. Less time is better.
[ 16.514] (--) CHROME(0): Timed libc YUV420 copy... 2724092.
Throughput: 435.6 MiB/s.
[ 16.518] (--) CHROME(0): Timed kernel YUV420 copy... 2658316.
Throughput: 446.4 MiB/s.
[ 16.522] (--) CHROME(0): Timed SSE YUV420 copy... 2361744.
Throughput: 502.5 MiB/s.
[ 16.526] (--) CHROME(0): Timed MMX YUV420 copy... 2492364.
Throughput: 476.1 MiB/s.
[ 16.527] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by
CPU.
[ 16.531] (--) CHROME(0): Timed MMX2 YUV420 copy... 2428196.
Throughput: 488.7 MiB/s.
[ 16.531] Freed 20217920 (pool 4)
[ 16.531] (--) CHROME(0): Using SSE YUV42X copy for video.
[ 16.531] (II) CHROME(0): [XvMC] Registering chromeXvMC.
[ 16.531] (II) CHROME(0): [XvMC] Initialized XvMC extension.
[ 16.532] (II) CHROME(0): - Done
[ 16.532] (--) RandR disabled
[ 16.532] (II) Initializing built-in extension Generic Event Extension
[ 16.532] (II) Initializing built-in extension SHAPE
[ 16.532] (II) Initializing built-in extension MIT-SHM
[ 16.532] (II) Initializing built-in extension XInputExtension
[ 16.532] (II) Initializing built-in extension XTEST
[ 16.532] (II) Initializing built-in extension BIG-REQUESTS
[ 16.532] (II) Initializing built-in extension SYNC
[ 16.532] (II) Initializing built-in extension XKEYBOARD
[ 16.532] (II) Initializing built-in extension XC-MISC
[ 16.532] (II) Initializing built-in extension SECURITY
[ 16.532] (II) Initializing built-in extension XINERAMA
[ 16.532] (II) Initializing built-in extension XFIXES
[ 16.532] (II) Initializing built-in extension RENDER
[ 16.533] (II) Initializing built-in extension RANDR
[ 16.533] (II) Initializing built-in extension COMPOSITE
[ 16.533] (II) Initializing built-in extension DAMAGE
[ 16.564] (II) AIGLX: Screen 0 is not DRI2 capable
[ 16.564] drmOpenDevice: node name is /dev/dri/card0
[ 16.564] drmOpenDevice: open result is 10, (OK)
[ 16.565] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 16.565] drmOpenDevice: node name is /dev/dri/card0
[ 16.565] drmOpenDevice: open result is 10, (OK)
[ 16.565] drmOpenByBusid: drmOpenMinor returns 10
[ 16.565] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 16.565] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 16.565] (EE) AIGLX error: dlopen of
/usr/lib/xorg/modules/dri/unichrome_dri.so failed
(/usr/lib/xorg/modules/dri/unichrome_dri.so: cannot open shared object
file: No such file or directory)
[ 16.566] (EE) AIGLX: reverting to software rendering
[ 16.933] (II) AIGLX: Loaded and initialized swrast
[ 16.933] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 18.030] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 18.031] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 18.031] (II) LoadModule: "evdev"
[ 18.031] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.047] (II) Module evdev: vendor="X.Org Foundation"
[ 18.047] compiled for 1.12.3, module version = 2.7.1
[ 18.047] Module class: X.Org XInput Driver
[ 18.048] ABI class: X.Org XInput driver, version 16.0
[ 18.048] (II) Using input driver 'evdev' for 'Power Button'
[ 18.048] (**) Power Button: always reports core events
[ 18.048] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 18.048] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.048] (--) evdev: Power Button: Found keys
[ 18.048] (II) evdev: Power Button: Configuring as keyboard
[ 18.048] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.049] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 18.049] (**) Option "xkb_rules" "evdev"
[ 18.049] (**) Option "xkb_model" "evdev"
[ 18.049] (**) Option "xkb_layout" "us"
[ 18.164] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 18.164] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 18.164] (II) Using input driver 'evdev' for 'Power Button'
[ 18.164] (**) Power Button: always reports core events
[ 18.164] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 18.164] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.165] (--) evdev: Power Button: Found keys
[ 18.165] (II) evdev: Power Button: Configuring as keyboard
[ 18.165] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 18.165] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 18.165] (**) Option "xkb_rules" "evdev"
[ 18.165] (**) Option "xkb_model" "evdev"
[ 18.165] (**) Option "xkb_layout" "us"
[ 18.168] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 18.168] (**) Sleep Button: Applying InputClass "evdev keyboard
catchall"
[ 18.168] (II) Using input driver 'evdev' for 'Sleep Button'
[ 18.168] (**) Sleep Button: always reports core events
[ 18.168] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 18.168] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 18.168] (--) evdev: Sleep Button: Found keys
[ 18.168] (II) evdev: Sleep Button: Configuring as keyboard
[ 18.169] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 18.169] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8)
[ 18.169] (**) Option "xkb_rules" "evdev"
[ 18.169] (**) Option "xkb_model" "evdev"
[ 18.169] (**) Option "xkb_layout" "us"
[ 18.172] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 18.172] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 18.172] (II) Using input driver 'evdev' for 'AT Translated Set 2
keyboard'
[ 18.172] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.172] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 18.172] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product
0x1
[ 18.172] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 18.172] (II) evdev: AT Translated Set 2 keyboard: Configuring as
keyboard
[ 18.173] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.173] (II) XINPUT: Adding extended input device "AT Translated Set
2 keyboard" (type: KEYBOARD, id 9)
[ 18.173] (**) Option "xkb_rules" "evdev"
[ 18.173] (**) Option "xkb_model" "evdev"
[ 18.173] (**) Option "xkb_layout" "us"
[ 18.175] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 18.176] (II) No input driver specified, ignoring this device.
[ 18.176] (II) This device may have been added with another device file.
[ 20.350] (II) CHROME(0): ViaDisplayDisableCRT
[ 22.224] (II) CHROME(0): ViaDisplayDisableCRT
Dne Thu, 02 Aug 2012 00:07:03 +0200 James Simmons <jsimmons at infradead.org>
napsal(a):
>
>> Hi Xavier again,
>>
>> The modeline is copied from working setting with shorter cable.
>>
>> The mode is added. I see it by VNC. But the CRT output is closed.
>> The openchrome driver closes CRT output and
>> xrandr can not open the CRT output because it does not see it.
>>
>> Wondering if any options exist to say openchrome driver: Don`t close CRT
>> output.
>
> Can you try running x server without xorg.conf file. Also if that works I
> like to see your xrandr output besides Xorg.logs. Thanks.
>
>
>> Regards
>> Filip
>>
>> Dne Wed, 01 Aug 2012 22:09:56 +0200 Filip Dvo??k <fila at pruda.com>
>> napsal(a):
>>
>> > Hi Xavier,
>> >
>> > No the other laptops don`t use openchrome.
>> > But I have tried openchrome version 0.2.906 today. It works.
>> >
>> > This setup works with shorter cable.
>> >
>> > I`m sure that the resolution is 1366x768.
>> >
>> >
>> > Dne Wed, 01 Aug 2012 21:52:51 +0200 Xavier Bachelot
>> <xavier at bachelot.org>
>> > napsal(a):
>> >
>> >> Hi Filip,
>> >>
>> >> On 08/01/2012 11:18 AM, Filip Dvo??k wrote:
>> >>>
>> >>> Hello,
>> >>>
>> >>> I have been trying to use openchrome with longer cabel (5 metres).
>> >>> The problem is that randr don`t see the monitor.
>> >>> Cable is OK. I have tried 3 laptops and VESA driver.
>> >>> I can not use VESA becouse VESA don`t know resolution 1366x768.
>> >>>
>> >> I'm not sure to fully understand what you tried, so I have a few
>> >> questions.
>> >> Are the other laptops all using openchrome ?
>> >> Did this setup work with any of the other laptops ?
>> >> Does this setup works with a standard length VGA cable ?
>> >> Also, the resolution looks weird. Are you sure the native resolution
>> of
>> >> your external screen is 1366x768 ? It looks like a laptop's screen
>> >> resolution.
>> >>
>> >>> It`s also impossible to open CRT(VGA) output without monitor.
>> >>>
>> >>>
>> >>> The last lines in logs are:
>> >>> [ 18.967] (II) CHROME(0): ViaDisplayEnableCRT
>> >>> [ 21.514] (II) CHROME(0): ViaDisplayDisableCRT
>> >>> [ 23.456] (II) CHROME(0): ViaDisplayDisableCRT
>> >>>
>> >>> My question is it possible to switch on CRT manually?
>> >>>
>> >> A quick search on the net turned out that it should be possible to do
>> >> that by manually adding a mode to the output. Something like that :
>> >>
>> >> $ xrandr --addmode VGA1 1366x768
>> >> xrandr --output VGA1 --mode 1366x768
>> >>
>> >> Possibly you might also need to add a modeline before doing the
>> above :
>> >> $ gtf 1366 768 60
>> >>
>> >> # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
>> >> Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772
>> 795
>> >> -HSync +Vsync
>> >>
>> >> $ xrandr --newmode 1366x768 85.86 1368 1440 1584 1800 768 769 772
>> 795
>> >> -HSync +Vsync
>> >>
>> >>
>> >> Never tried that myself, so your mileage may vary...
>> >>
>> >> Regards,
>> >> Xavier
>> >>
>> >>
>> >> _______________________________________________
>> >> openchrome-users mailing list
>> >> openchrome-users at openchrome.org
>> >> http://wiki.openchrome.org/mailman/listinfo/openchrome-users
>> >> Main page:
>> >> http://www.openchrome.org
>> >> Wiki:
>> >> http://www.openchrome.org/trac/wiki/TOC
>> >
>> > _______________________________________________
>> > openchrome-users mailing list
>> > openchrome-users at openchrome.org
>> > http://wiki.openchrome.org/mailman/listinfo/openchrome-users
>> > Main page:
>> > http://www.openchrome.org
>> > Wiki:
>> > http://www.openchrome.org/trac/wiki/TOC
>>
>> _______________________________________________
>> openchrome-users mailing list
>> openchrome-users at openchrome.org
>> http://wiki.openchrome.org/mailman/listinfo/openchrome-users
>> Main page:
>> http://www.openchrome.org
>> Wiki:
>> http://www.openchrome.org/trac/wiki/TOC
More information about the Openchrome-users
mailing list