[Openchrome-users] VGA output is disable
James Simmons
jsimmons
Mon Aug 6 07:39:48 PDT 2012
> Without xorg.conf it is the same result. Monitor has not signal.
Does your monitor report EDID with another non VIA graphcis card?
Does this help :
https://wiki.archlinux.org/index.php/Xrandr#Adding_undetected_resolutions
Also can you tell me the output of read-edid. It's a command from user
space.
Then finally if you are willing to try the via KMS kernel tree? I'm
curiosity to see if the drm driver will pick up the EDID of the analog
port.
> logs:
>
> [ 15.739]
> X.Org X Server 1.12.3
> Release Date: 2012-07-09
> [ 15.739] X Protocol Version 11, Revision 0
> [ 15.739] Build Operating System: Linux 3.4.4-3-ARCH i686
> [ 15.739] Current Operating System: Linux recepce 3.0.38-1-lts #1 SMP
> PREEMPT Fri Jul 20 06:30:55 UTC 2012 i686
> [ 15.740] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts
> root=UUID=75fda088-c708-4274-b182-532e50add9e3 ro quiet
> [ 15.740] Build Date: 09 July 2012 04:03:16PM
> [ 15.740]
> [ 15.740] Current version of pixman: 0.26.2
> [ 15.740] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 15.740] Markers: (--) probed, (**) from config file, (==) default
> setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 15.741] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 2 00:41:07
> 2012
> [ 15.780] (==) Using config directory: "/etc/X11/xorg.conf.d"
> [ 15.812] (==) No Layout section. Using the first Screen section.
> [ 15.812] (==) No screen section available. Using defaults.
> [ 15.812] (**) |-->Screen "Default Screen Section" (0)
> [ 15.812] (**) | |-->Monitor "<default monitor>"
> [ 15.821] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 15.821] (==) Automatically adding devices
> [ 15.821] (==) Automatically enabling devices
> [ 15.884] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
> [ 15.884] Entry deleted from font path.
> [ 15.884] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
> [ 15.884] Entry deleted from font path.
> [ 15.911] (==) FontPath set to:
> /usr/share/fonts/misc/,
> /usr/share/fonts/TTF/,
> /usr/share/fonts/100dpi/,
> /usr/share/fonts/75dpi/
> [ 15.911] (==) ModulePath set to "/usr/lib/xorg/modules"
> [ 15.911] (II) The server relies on udev to provide the list of input
> devices.
> If no devices become available, reconfigure udev or disable
> AutoAddDevices.
> [ 15.911] (II) Loader magic: 0x82235a0
> [ 15.911] (II) Module ABI versions:
> [ 15.911] X.Org ANSI C Emulation: 0.4
> [ 15.911] X.Org Video Driver: 12.0
> [ 15.911] X.Org XInput driver : 16.0
> [ 15.911] X.Org Server Extension : 6.0
> [ 15.915] (--) PCI:*(0:1:0:0) 1106:3344:1462:7104 rev 1, Mem @
> 0xf0000000/67108864, 0xfb000000/16777216, BIOS @ 0x????????/65536
> [ 15.915] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or
> directory)
> [ 15.915] (II) LoadModule: "extmod"
> [ 15.919] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
> [ 15.948] (II) Module extmod: vendor="X.Org Foundation"
> [ 15.948] compiled for 1.12.3, module version = 1.0.0
> [ 15.948] Module class: X.Org Server Extension
> [ 15.948] ABI class: X.Org Server Extension, version 6.0
> [ 15.948] (II) Loading extension MIT-SCREEN-SAVER
> [ 15.948] (II) Loading extension XFree86-VidModeExtension
> [ 15.948] (II) Loading extension XFree86-DGA
> [ 15.948] (II) Loading extension DPMS
> [ 15.948] (II) Loading extension XVideo
> [ 15.948] (II) Loading extension XVideo-MotionCompensation
> [ 15.948] (II) Loading extension X-Resource
> [ 15.948] (II) LoadModule: "dbe"
> [ 15.949] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
> [ 15.963] (II) Module dbe: vendor="X.Org Foundation"
> [ 15.963] compiled for 1.12.3, module version = 1.0.0
> [ 15.964] Module class: X.Org Server Extension
> [ 15.964] ABI class: X.Org Server Extension, version 6.0
> [ 15.964] (II) Loading extension DOUBLE-BUFFER
> [ 15.964] (II) LoadModule: "glx"
> [ 15.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> [ 15.990] (II) Module glx: vendor="X.Org Foundation"
> [ 15.990] compiled for 1.12.3, module version = 1.0.0
> [ 15.990] ABI class: X.Org Server Extension, version 6.0
> [ 15.990] (==) AIGLX enabled
> [ 15.991] (II) Loading extension GLX
> [ 15.991] (II) LoadModule: "record"
> [ 15.991] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
> [ 15.992] (II) Module record: vendor="X.Org Foundation"
> [ 15.993] compiled for 1.12.3, module version = 1.13.0
> [ 15.993] Module class: X.Org Server Extension
> [ 15.993] ABI class: X.Org Server Extension, version 6.0
> [ 15.993] (II) Loading extension RECORD
> [ 15.993] (II) LoadModule: "dri"
> [ 15.993] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
> [ 16.004] (II) Module dri: vendor="X.Org Foundation"
> [ 16.004] compiled for 1.12.3, module version = 1.0.0
> [ 16.004] ABI class: X.Org Server Extension, version 6.0
> [ 16.004] (II) Loading extension XFree86-DRI
> [ 16.004] (II) LoadModule: "dri2"
> [ 16.004] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
> [ 16.006] (II) Module dri2: vendor="X.Org Foundation"
> [ 16.006] compiled for 1.12.3, module version = 1.2.0
> [ 16.006] ABI class: X.Org Server Extension, version 6.0
> [ 16.006] (II) Loading extension DRI2
> [ 16.006] (==) Matched openchrome as autoconfigured driver 0
> [ 16.006] (==) Matched vesa as autoconfigured driver 1
> [ 16.006] (==) Matched fbdev as autoconfigured driver 2
> [ 16.006] (==) Assigned the driver to the xf86ConfigLayout
> [ 16.006] (II) LoadModule: "openchrome"
> [ 16.062] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
> [ 16.099] (II) Module openchrome: vendor="http://openchrome.org/"
> [ 16.100] compiled for 1.12.3, module version = 0.3.0
> [ 16.100] Module class: X.Org Video Driver
> [ 16.100] ABI class: X.Org Video Driver, version 12.0
> [ 16.100] (II) LoadModule: "vesa"
> [ 16.101] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
> [ 16.118] (II) Module vesa: vendor="X.Org Foundation"
> [ 16.118] compiled for 1.12.3, module version = 2.3.2
> [ 16.118] Module class: X.Org Video Driver
> [ 16.118] ABI class: X.Org Video Driver, version 12.0
> [ 16.118] (II) LoadModule: "fbdev"
> [ 16.119] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
> [ 16.125] (II) Module fbdev: vendor="X.Org Foundation"
> [ 16.125] compiled for 1.12.2, module version = 0.4.3
> [ 16.125] Module class: X.Org Video Driver
> [ 16.125] ABI class: X.Org Video Driver, version 12.0
> [ 16.125] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
> KM400/KN400,
> K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
> CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
> VX855/VX875, VX900
> [ 16.125] (II) VESA: driver for VESA chipsets: vesa
> [ 16.125] (II) FBDEV: driver for framebuffer: fbdev
> [ 16.126] (++) using VT number 7
>
> [ 16.172] (!!) VIA Technologies does not support this driver in any way.
> [ 16.172] (!!) For support, please refer to http://www.openchrome.org/.
> [ 16.172] (!!) (openchrome 0.3.0 release)
> [ 16.172] (WW) Falling back to old probe method for vesa
> [ 16.172] (WW) Falling back to old probe method for fbdev
> [ 16.172] (II) Loading sub module "fbdevhw"
> [ 16.172] (II) LoadModule: "fbdevhw"
> [ 16.173] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
> [ 16.179] (II) Module fbdevhw: vendor="X.Org Foundation"
> [ 16.179] compiled for 1.12.3, module version = 0.0.2
> [ 16.179] ABI class: X.Org Video Driver, version 12.0
> [ 16.179] (II) CHROME(0): VIAPreInit
> [ 16.179] (II) CHROME(0): VIAGetRec
> [ 16.180] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700
> [ 16.180] (--) CHROME(0): Chipset revision: 0
> [ 16.180] drmOpenDevice: node name is /dev/dri/card0
> [ 16.284] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> [ 16.285] drmOpenDevice: node name is /dev/dri/card0
> [ 16.285] drmOpenDevice: open result is 9, (OK)
> [ 16.285] drmOpenByBusid: drmOpenMinor returns 9
> [ 16.285] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> [ 16.286] (II) [drm] KMS not enabled
> [ 16.286] (II) CHROME(0): [drm] via interface version: 2.11.1
> [ 16.286] (II) CHROME(0): DRI 1 api supported
> [ 16.296] (II) Loading sub module "vgahw"
> [ 16.297] (II) LoadModule: "vgahw"
> [ 16.297] (II) Loading /usr/lib/xorg/modules/libvgahw.so
> [ 16.299] (II) Module vgahw: vendor="X.Org Foundation"
> [ 16.299] compiled for 1.12.3, module version = 0.1.0
> [ 16.299] ABI class: X.Org Video Driver, version 12.0
> [ 16.299] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
> [ 16.299] (II) CHROME(0): VIAMapMMIO
> [ 16.300] (--) CHROME(0): mapping MMIO @ 0xfb000000 with size 0xd000
> [ 16.300] (--) CHROME(0): mapping BitBlt MMIO @ 0xfb200000 with size
> 0x200000
> [ 16.301] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
> [ 16.301] (II) CHROME(0): VIAMapFB
> [ 16.301] (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size
> 0x4000000
> [ 16.315] (--) CHROME(0): Frame buffer start: 0xb2f29000, free start: 0x0
> end: 0x4000000
> [ 16.315] (II) CHROME(0): Creating default Display subsection in Screen
> section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 16.315] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
> [ 16.315] (==) CHROME(0): RGB weight 888
> [ 16.315] (==) CHROME(0): Default visual is TrueColor
> [ 16.315] (II) CHROME(0): VIASetupDefaultOptions - Setting up default
> chipset options.
> [ 16.316] (==) CHROME(0): Shadow framebuffer is disabled.
> [ 16.316] (==) CHROME(0): Hardware acceleration is enabled.
> [ 16.316] (==) CHROME(0): Using EXA acceleration architecture.
> [ 16.316] (==) CHROME(0): EXA composite acceleration disabled.
> [ 16.316] (==) CHROME(0): EXA scratch area size is 4096 kB.
> [ 16.316] (==) CHROME(0): Using hardware two-color cursors and software
> full-color cursors.
> [ 16.316] (==) CHROME(0): GPU virtual command queue will be enabled.
> [ 16.316] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
> [ 16.316] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
> [ 16.316] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
> [ 16.316] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI
> is enabled.
> [ 16.316] (==) CHROME(0): Will not enable VBE modes.
> [ 16.316] (==) CHROME(0): VBE VGA register save & restore will not be used
> if VBE modes are enabled.
> [ 16.316] (==) CHROME(0): Xv Bandwidth check is enabled.
> [ 16.316] (==) CHROME(0): Will not impose a limit on video RAM reserved for
> DRI.
> [ 16.316] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
> [ 16.316] (==) CHROME(0): TV dotCrawl is disabled.
> [ 16.317] (==) CHROME(0): TV deflicker is set to 0.
> [ 16.317] (==) CHROME(0): No default TV type is set.
> [ 16.317] (==) CHROME(0): No default TV output signal type is set.
> [ 16.317] (==) CHROME(0): No default TV output port is set.
> [ 16.317] (==) CHROME(0): Will not print VGA registers.
> [ 16.317] (==) CHROME(0): Will not scan I2C buses.
> [ 16.317] (II) CHROME(0): ...Finished parsing config file options.
> [ 16.317] (--) CHROME(0): Detected MSI PM8M-V. Card-Ids (1462|7104)
> [ 16.317] (II) CHROME(0): Detected MemClk 6
> [ 16.317] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 6
> [ 16.317] (II) CHROME(0): Detected TV standard: NTSC.
> [ 16.317] (II) Loading sub module "ramdac"
> [ 16.317] (II) LoadModule: "ramdac"
> [ 16.317] (II) Module "ramdac" already built-in
> [ 16.317] (II) Loading sub module "i2c"
> [ 16.318] (II) LoadModule: "i2c"
> [ 16.318] (II) Module "i2c" already built-in
> [ 16.318] (II) CHROME(0): ViaI2CInit
> [ 16.318] (II) CHROME(0): ViaI2CBus1Init
> [ 16.318] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
> [ 16.318] (II) CHROME(0): ViaI2cBus2Init
> [ 16.318] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
> [ 16.318] (II) CHROME(0): ViaI2CBus3Init
> [ 16.318] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
> [ 16.318] (II) Loading sub module "ddc"
> [ 16.318] (II) LoadModule: "ddc"
> [ 16.318] (II) Module "ddc" already built-in
> [ 16.318] (II) CHROME(0): ViaOutputsDetect
> [ 16.319] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
> [ 16.319] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
> [ 16.319] (==) CHROME(0): LVDS Panel will not be forced.
> [ 16.319] (==) CHROME(0): Panel size is not selected from config file.
> [ 16.319] (II) CHROME(0): Output VGA-1 has no monitor section
> [ 16.320] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address
> 0xA0.
> [ 16.323] (II) CHROME(0): ViaDisplayDisableCRT
> [ 16.323] (II) CHROME(0): EDID for output VGA-1
> [ 16.323] (II) CHROME(0): Output VGA-1 disconnected
> [ 16.323] (WW) CHROME(0): No outputs definitely connected, trying again...
> [ 16.323] (II) CHROME(0): Output VGA-1 disconnected
> [ 16.323] (WW) CHROME(0): Unable to find connected outputs - setting
> 1024x768 initial framebuffer
> [ 16.324] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless
> otherwise stated.
> [ 16.324] (==) CHROME(0): DPI set to (96, 96)
> [ 16.324] (II) Loading sub module "fb"
> [ 16.324] (II) LoadModule: "fb"
> [ 16.351] (II) Loading /usr/lib/xorg/modules/libfb.so
> [ 16.366] (II) Module fb: vendor="X.Org Foundation"
> [ 16.366] compiled for 1.12.3, module version = 1.0.0
> [ 16.366] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 16.366] (II) Loading sub module "exa"
> [ 16.367] (II) LoadModule: "exa"
> [ 16.367] (II) Loading /usr/lib/xorg/modules/libexa.so
> [ 16.398] (II) Module exa: vendor="X.Org Foundation"
> [ 16.398] compiled for 1.12.3, module version = 2.5.0
> [ 16.398] ABI class: X.Org Video Driver, version 12.0
> [ 16.398] (II) UnloadModule: "vesa"
> [ 16.399] (II) Unloading vesa
> [ 16.399] (II) UnloadModule: "fbdev"
> [ 16.399] (II) Unloading fbdev
> [ 16.399] (II) UnloadSubModule: "fbdevhw"
> [ 16.399] (II) Unloading fbdevhw
> [ 16.399] (--) Depth 24 pixmap format is 32 bpp
> [ 16.399] (II) CHROME(0): VIAScreenInit
> [ 16.400] drmOpenDevice: node name is /dev/dri/card0
> [ 16.400] drmOpenDevice: open result is 9, (OK)
> [ 16.400] drmOpenDevice: node name is /dev/dri/card0
> [ 16.400] drmOpenDevice: open result is 9, (OK)
> [ 16.400] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> [ 16.400] drmOpenDevice: node name is /dev/dri/card0
> [ 16.400] drmOpenDevice: open result is 9, (OK)
> [ 16.401] drmOpenByBusid: drmOpenMinor returns 9
> [ 16.401] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> [ 16.401] (II) [drm] DRM interface version 1.4
> [ 16.401] (II) [drm] DRM open master succeeded.
> [ 16.401] (II) CHROME(0): [drm] Using the DRM lock SAREA also for
> drawables.
> [ 16.401] (II) CHROME(0): [drm] framebuffer handle = 0xf0000000
> [ 16.402] (II) CHROME(0): [drm] added 1 reserved context for kernel
> [ 16.402] (II) CHROME(0): X context handle = 0x1
> [ 16.402] (II) CHROME(0): [drm] installed DRM signal handler
> [ 16.402] (II) CHROME(0): [dri] visual configs initialized.
> [ 16.402] (II) CHROME(0): [drm] register handle = 0xfb000000
> [ 16.402] (II) CHROME(0): [drm] framebuffer handle = 0xf0000000
> [ 16.403] (II) CHROME(0): [drm] mmio Registers = 0xfb000000
> [ 16.403] (II) CHROME(0): [dri] mmio mapped.
> [ 16.403] (II) CHROME(0): DRI1 ScreenInit commplete
> [ 16.403] (II) CHROME(0): [drm] Detected AGP vendor 0x1106, device 0x0314
> [ 16.403] (II) CHROME(0): [drm] Found AGP v3 compatible device. Trying AGP
> 8X mode.
> [ 16.403] (II) CHROME(0): [drm] Trying to enable AGP fast writes.
> [ 16.467] (II) CHROME(0): [drm] drmAgpEnabled succeeded
> [ 16.473] (II) CHROME(0): [drm] agpAddr = 0xf4000000
> [ 16.473] (II) CHROME(0): [drm] agpSize = 0x01e00000
> [ 16.473] (II) CHROME(0): [drm] agp physical addr = 0xb10ed000
> [ 16.473] (II) CHROME(0): [dri] Using AGP.
> [ 16.473] (II) CHROME(0): [drm] Using 65536 KB for DRM memory heap.
> [ 16.473] (II) CHROME(0): [dri] Frame buffer initialized.
> [ 16.473] (II) CHROME(0): [dri] Kernel data initialized.
> [ 16.473] 3145728 bytes of DRI memory allocated at 0, handle 703552736
> [ 16.473] 262144 bytes of DRI memory allocated at 300000, handle 4075772896
> [ 16.474] 32 bytes of DRI memory allocated at 340000, handle 313481760
> [ 16.474] 32 bytes of DRI memory allocated at 340020, handle 3685701920
> [ 16.486] (II) CHROME(0): - Visuals set up
> [ 16.497] (II) CHROME(0): - B & W
> [ 16.499] (II) CHROME(0): [EXA] Disabling EXA accelerated composite.
> [ 16.499] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
> [ 16.499] (II) EXA(0): Offscreen pixmap area of 63963136 bytes
> [ 16.499] (II) EXA(0): Driver registered support for the following
> operations:
> [ 16.499] (II) Solid
> [ 16.500] (II) Copy
> [ 16.500] (II) DownloadFromScreen
> [ 16.500] (II) CHROME(0): [EXA] Enabled EXA acceleration.
> [ 16.500] (==) CHROME(0): Backing store disabled
> [ 16.500] (II) CHROME(0): - Backing store set up
> [ 16.500] (II) CHROME(0): - SW cursor set up
> [ 16.500] (II) CHROME(0): HWCursor ARGB enabled
> [ 16.500] 16384 bytes of DRI memory allocated at 340040, handle 846157920
> [ 16.500] 16384 bytes of DRI memory allocated at 344040, handle 2727303488
> [ 16.500] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR
> disabled message.
> [ 16.501] (II) CHROME(0): - Def Color map set up
> [ 16.501] (II) CHROME(0): - Palette loaded
> [ 16.501] (II) CHROME(0): - Color maps etc. set up
> [ 16.501] (==) CHROME(0): DPMS enabled
> [ 16.501] (II) CHROME(0): - DPMS set up
> [ 16.501] (II) CHROME(0): VIAEnterVT
> [ 16.501] (II) CHROME(0): VIASave
> [ 16.501] (II) CHROME(0): Primary
> [ 16.503] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
> [ 16.503] (II) CHROME(0): Crtc...
> [ 16.503] (II) CHROME(0): TVSave...
> [ 16.503] (II) CHROME(0): VIASave
> [ 16.503] (II) CHROME(0): Primary
> [ 16.503] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
> [ 16.503] (II) CHROME(0): Crtc...
> [ 16.503] (II) CHROME(0): TVSave...
> [ 16.503] (II) CHROME(0): ViaDisplayDisableCRT
> [ 16.504] (II) CHROME(0): ViaDisplayDisableCRT
> [ 16.504] 16777216 bytes of DRI memory allocated at 348040, handle
> 4040121600
> [ 16.504] (II) CHROME(0): [DRI] installation complete
> [ 16.504] (II) CHROME(0): [drm] IRQ handler installed, using IRQ 16.
> [ 16.505] (II) CHROME(0): [drm] Initialized AGP ring-buffer, size 0x200000
> at AGP offset 0x1e00000.
> [ 16.505] (II) CHROME(0): direct rendering enabled
> [ 16.505] 4194304 bytes of DRI memory allocated at 0, handle 788922336
> [ 16.505] (II) CHROME(0): Allocated 4096 kiB of AGP memory for EXA scratch
> area.
> [ 16.505] (II) CHROME(0): [Xv] Using PCI DMA for Xv image transfer.
> [ 16.505] 635904 bytes of DRI memory allocated at 1348040, handle
> 1285947200
> [ 16.507] (II) CHROME(0): Benchmarking video copy. Less time is better.
> [ 16.514] (--) CHROME(0): Timed libc YUV420 copy... 2724092. Throughput:
> 435.6 MiB/s.
> [ 16.518] (--) CHROME(0): Timed kernel YUV420 copy... 2658316. Throughput:
> 446.4 MiB/s.
> [ 16.522] (--) CHROME(0): Timed SSE YUV420 copy... 2361744. Throughput:
> 502.5 MiB/s.
> [ 16.526] (--) CHROME(0): Timed MMX YUV420 copy... 2492364. Throughput:
> 476.1 MiB/s.
> [ 16.527] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by
> CPU.
> [ 16.531] (--) CHROME(0): Timed MMX2 YUV420 copy... 2428196. Throughput:
> 488.7 MiB/s.
> [ 16.531] Freed 20217920 (pool 4)
> [ 16.531] (--) CHROME(0): Using SSE YUV42X copy for video.
> [ 16.531] (II) CHROME(0): [XvMC] Registering chromeXvMC.
> [ 16.531] (II) CHROME(0): [XvMC] Initialized XvMC extension.
> [ 16.532] (II) CHROME(0): - Done
> [ 16.532] (--) RandR disabled
> [ 16.532] (II) Initializing built-in extension Generic Event Extension
> [ 16.532] (II) Initializing built-in extension SHAPE
> [ 16.532] (II) Initializing built-in extension MIT-SHM
> [ 16.532] (II) Initializing built-in extension XInputExtension
> [ 16.532] (II) Initializing built-in extension XTEST
> [ 16.532] (II) Initializing built-in extension BIG-REQUESTS
> [ 16.532] (II) Initializing built-in extension SYNC
> [ 16.532] (II) Initializing built-in extension XKEYBOARD
> [ 16.532] (II) Initializing built-in extension XC-MISC
> [ 16.532] (II) Initializing built-in extension SECURITY
> [ 16.532] (II) Initializing built-in extension XINERAMA
> [ 16.532] (II) Initializing built-in extension XFIXES
> [ 16.532] (II) Initializing built-in extension RENDER
> [ 16.533] (II) Initializing built-in extension RANDR
> [ 16.533] (II) Initializing built-in extension COMPOSITE
> [ 16.533] (II) Initializing built-in extension DAMAGE
> [ 16.564] (II) AIGLX: Screen 0 is not DRI2 capable
> [ 16.564] drmOpenDevice: node name is /dev/dri/card0
> [ 16.564] drmOpenDevice: open result is 10, (OK)
> [ 16.565] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> [ 16.565] drmOpenDevice: node name is /dev/dri/card0
> [ 16.565] drmOpenDevice: open result is 10, (OK)
> [ 16.565] drmOpenByBusid: drmOpenMinor returns 10
> [ 16.565] drmOpenByBusid: Interface 1.4 failed, trying 1.1
> [ 16.565] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> [ 16.565] (EE) AIGLX error: dlopen of
> /usr/lib/xorg/modules/dri/unichrome_dri.so failed
> (/usr/lib/xorg/modules/dri/unichrome_dri.so: cannot open shared object file:
> No such file or directory)
> [ 16.566] (EE) AIGLX: reverting to software rendering
> [ 16.933] (II) AIGLX: Loaded and initialized swrast
> [ 16.933] (II) GLX: Initialized DRISWRAST GL provider for screen 0
> [ 18.030] (II) config/udev: Adding input device Power Button
> (/dev/input/event3)
> [ 18.031] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 18.031] (II) LoadModule: "evdev"
> [ 18.031] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 18.047] (II) Module evdev: vendor="X.Org Foundation"
> [ 18.047] compiled for 1.12.3, module version = 2.7.1
> [ 18.047] Module class: X.Org XInput Driver
> [ 18.048] ABI class: X.Org XInput driver, version 16.0
> [ 18.048] (II) Using input driver 'evdev' for 'Power Button'
> [ 18.048] (**) Power Button: always reports core events
> [ 18.048] (**) evdev: Power Button: Device: "/dev/input/event3"
> [ 18.048] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 18.048] (--) evdev: Power Button: Found keys
> [ 18.048] (II) evdev: Power Button: Configuring as keyboard
> [ 18.048] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
> [ 18.049] (II) XINPUT: Adding extended input device "Power Button" (type:
> KEYBOARD, id 6)
> [ 18.049] (**) Option "xkb_rules" "evdev"
> [ 18.049] (**) Option "xkb_model" "evdev"
> [ 18.049] (**) Option "xkb_layout" "us"
> [ 18.164] (II) config/udev: Adding input device Power Button
> (/dev/input/event1)
> [ 18.164] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 18.164] (II) Using input driver 'evdev' for 'Power Button'
> [ 18.164] (**) Power Button: always reports core events
> [ 18.164] (**) evdev: Power Button: Device: "/dev/input/event1"
> [ 18.164] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 18.165] (--) evdev: Power Button: Found keys
> [ 18.165] (II) evdev: Power Button: Configuring as keyboard
> [ 18.165] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
> [ 18.165] (II) XINPUT: Adding extended input device "Power Button" (type:
> KEYBOARD, id 7)
> [ 18.165] (**) Option "xkb_rules" "evdev"
> [ 18.165] (**) Option "xkb_model" "evdev"
> [ 18.165] (**) Option "xkb_layout" "us"
> [ 18.168] (II) config/udev: Adding input device Sleep Button
> (/dev/input/event2)
> [ 18.168] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
> [ 18.168] (II) Using input driver 'evdev' for 'Sleep Button'
> [ 18.168] (**) Sleep Button: always reports core events
> [ 18.168] (**) evdev: Sleep Button: Device: "/dev/input/event2"
> [ 18.168] (--) evdev: Sleep Button: Vendor 0 Product 0x3
> [ 18.168] (--) evdev: Sleep Button: Found keys
> [ 18.168] (II) evdev: Sleep Button: Configuring as keyboard
> [ 18.169] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
> [ 18.169] (II) XINPUT: Adding extended input device "Sleep Button" (type:
> KEYBOARD, id 8)
> [ 18.169] (**) Option "xkb_rules" "evdev"
> [ 18.169] (**) Option "xkb_model" "evdev"
> [ 18.169] (**) Option "xkb_layout" "us"
> [ 18.172] (II) config/udev: Adding input device AT Translated Set 2
> keyboard (/dev/input/event0)
> [ 18.172] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
> keyboard catchall"
> [ 18.172] (II) Using input driver 'evdev' for 'AT Translated Set 2
> keyboard'
> [ 18.172] (**) AT Translated Set 2 keyboard: always reports core events
> [ 18.172] (**) evdev: AT Translated Set 2 keyboard: Device:
> "/dev/input/event0"
> [ 18.172] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
> [ 18.172] (--) evdev: AT Translated Set 2 keyboard: Found keys
> [ 18.172] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
> [ 18.173] (**) Option "config_info"
> "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
> [ 18.173] (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD, id 9)
> [ 18.173] (**) Option "xkb_rules" "evdev"
> [ 18.173] (**) Option "xkb_model" "evdev"
> [ 18.173] (**) Option "xkb_layout" "us"
> [ 18.175] (II) config/udev: Adding input device PC Speaker
> (/dev/input/event4)
> [ 18.176] (II) No input driver specified, ignoring this device.
> [ 18.176] (II) This device may have been added with another device file.
> [ 20.350] (II) CHROME(0): ViaDisplayDisableCRT
> [ 22.224] (II) CHROME(0): ViaDisplayDisableCRT
>
>
>
>
> Dne Thu, 02 Aug 2012 00:07:03 +0200 James Simmons <jsimmons at infradead.org>
> napsal(a):
>
> >
> > > Hi Xavier again,
> > >
> > > The modeline is copied from working setting with shorter cable.
> > >
> > > The mode is added. I see it by VNC. But the CRT output is closed.
> > > The openchrome driver closes CRT output and
> > > xrandr can not open the CRT output because it does not see it.
> > >
> > > Wondering if any options exist to say openchrome driver: Don`t close CRT
> > > output.
> >
> > Can you try running x server without xorg.conf file. Also if that works I
> > like to see your xrandr output besides Xorg.logs. Thanks.
> >
> >
> > > Regards
> > > Filip
> > >
> > > Dne Wed, 01 Aug 2012 22:09:56 +0200 Filip Dvo??k <fila at pruda.com>
> > > napsal(a):
> > >
> > > > Hi Xavier,
> > > >
> > > > No the other laptops don`t use openchrome.
> > > > But I have tried openchrome version 0.2.906 today. It works.
> > > >
> > > > This setup works with shorter cable.
> > > >
> > > > I`m sure that the resolution is 1366x768.
> > > >
> > > >
> > > > Dne Wed, 01 Aug 2012 21:52:51 +0200 Xavier Bachelot
> > > > <xavier at bachelot.org>
> > > > napsal(a):
> > > >
> > > > > Hi Filip,
> > > > >
> > > > > On 08/01/2012 11:18 AM, Filip Dvo??k wrote:
> > > > > >
> > > > > > Hello,
> > > > > >
> > > > > > I have been trying to use openchrome with longer cabel (5 metres).
> > > > > > The problem is that randr don`t see the monitor.
> > > > > > Cable is OK. I have tried 3 laptops and VESA driver.
> > > > > > I can not use VESA becouse VESA don`t know resolution 1366x768.
> > > > > >
> > > > > I'm not sure to fully understand what you tried, so I have a few
> > > > > questions.
> > > > > Are the other laptops all using openchrome ?
> > > > > Did this setup work with any of the other laptops ?
> > > > > Does this setup works with a standard length VGA cable ?
> > > > > Also, the resolution looks weird. Are you sure the native resolution
> > > > > of
> > > > > your external screen is 1366x768 ? It looks like a laptop's screen
> > > > > resolution.
> > > > >
> > > > > > It`s also impossible to open CRT(VGA) output without monitor.
> > > > > >
> > > > > >
> > > > > > The last lines in logs are:
> > > > > > [ 18.967] (II) CHROME(0): ViaDisplayEnableCRT
> > > > > > [ 21.514] (II) CHROME(0): ViaDisplayDisableCRT
> > > > > > [ 23.456] (II) CHROME(0): ViaDisplayDisableCRT
> > > > > >
> > > > > > My question is it possible to switch on CRT manually?
> > > > > >
> > > > > A quick search on the net turned out that it should be possible to do
> > > > > that by manually adding a mode to the output. Something like that :
> > > > >
> > > > > $ xrandr --addmode VGA1 1366x768
> > > > > xrandr --output VGA1 --mode 1366x768
> > > > >
> > > > > Possibly you might also need to add a modeline before doing the above
> > > > > :
> > > > > $ gtf 1366 768 60
> > > > >
> > > > > # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
> > > > > Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772
> > > > > 795
> > > > > -HSync +Vsync
> > > > >
> > > > > $ xrandr --newmode 1366x768 85.86 1368 1440 1584 1800 768 769 772
> > > > > 795
> > > > > -HSync +Vsync
> > > > >
> > > > >
> > > > > Never tried that myself, so your mileage may vary...
> > > > >
> > > > > Regards,
> > > > > Xavier
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > openchrome-users mailing list
> > > > > openchrome-users at openchrome.org
> > > > > http://wiki.openchrome.org/mailman/listinfo/openchrome-users
> > > > > Main page:
> > > > > http://www.openchrome.org
> > > > > Wiki:
> > > > > http://www.openchrome.org/trac/wiki/TOC
> > > >
> > > > _______________________________________________
> > > > openchrome-users mailing list
> > > > openchrome-users at openchrome.org
> > > > http://wiki.openchrome.org/mailman/listinfo/openchrome-users
> > > > Main page:
> > > > http://www.openchrome.org
> > > > Wiki:
> > > > http://www.openchrome.org/trac/wiki/TOC
> > >
> > > _______________________________________________
> > > openchrome-users mailing list
> > > openchrome-users at openchrome.org
> > > http://wiki.openchrome.org/mailman/listinfo/openchrome-users
> > > Main page:
> > > http://www.openchrome.org
> > > Wiki:
> > > http://www.openchrome.org/trac/wiki/TOC
More information about the Openchrome-users
mailing list