[openchrome-users] Failed to open DRM device - DRM memory allocation failed -6

Wed Oct 21 10:13:48 UTC 2020

Hi Kevin,

Thanks for your reply.

I was hoping there was just a configuration error, also because X does
not seem to find a monitor at all.

> Using this "out of tree" OpenChrome DRM requires the user
> to compile and install a custom Linux kernel.

Well, if this is the route to go ...

So I set up the Igel for kernel building. I have not done anyhing like
this before so followed the instructions given here:
https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel

It took 13 hours to build but eventually the test seemd to be
successful. No error messages but 10 new .deb-files:
linux-buildinfo-5.4.0-51-generic_5.4.0-51.56_amd64.deb
linux-image-unsigned-5.4.0-51-generic_5.4.0-51.56_amd64.deb
linux-cloud-tools-5.4.0-51_5.4.0-51.56_amd64.deb
linux-modules-5.4.0-51-generic_5.4.0-51.56_amd64.deb
linux-cloud-tools-5.4.0-51-generic_5.4.0-51.56_amd64.deb
linux-modules-extra-5.4.0-51-generic_5.4.0-51.56_amd64.deb
linux-headers-5.4.0-51_5.4.0-51.56_all.deb
linux-tools-5.4.0-51_5.4.0-51.56_amd64.deb
linux-headers-5.4.0-51-generic_5.4.0-51.56_amd64.deb
linux-tools-5.4.0-51-generic_5.4.0-51.56_amd64.deb

Could you please point me to some documentation about how to proceed
from here?

On https://cgit.freedesktop.org/openchrome/drm-openchrome/ I found
various tree versions drm-next-5.x and master

also this link

git://anongit.freedesktop.org/openchrome/drm-openchrome

Whether they are relevant for me and if so, how to use them - I do not know.

Thank you.

Regards

Jochen

Am 19.10.20 um 20:54 schrieb Kevin Brace:
> Hi Jochen,
> 
> I am not very familiar with this device (IGEL UD10).
> It is possible that your previous OS installation used VIA Technologies written DDX.
> I know that one supports VX900 chipset's integrated DVI / HDMI transmitter.
> As of now, OpenChrome DDX does not support VX900 chipset's DVI / HDMI transmitter.
> The only exception is to use in-development OpenChrome DRM with OpenChrome DDX.
> The previous developer who worked on OpenChrome DRM ported VIA Technologies VX900 chipset's DVI / HDMI transmitter's code to OpenChrome DRM, but if the current OpenChrome DDX uses OpenChrome DRM, acceleration will be turned off.
> Using this "out of tree" OpenChrome DRM requires the user to compile and install a custom Linux kernel.
> It typically takes about 20 to 25 GB of free storage for doing this (I do work on this regularly.).
> 
> Regards,
> 
> Kevin Brace
> Brace Computer Laboratory blog
> https://bracecomputerlab.com
> 
> 
>> Date: Sat, 17 Oct 2020 17:50:29 +0200
>> From: next.step.now at t-online.de
>> To: openchrome-users at lists.freedesktop.org
>> Subject: [openchrome-users] Failed to open DRM device - DRM memory
>> 	allocation failed -6
>> Message-ID: <ef44d318-a962-3aba-3ce8-e54bfbdb6921 at t-online.de>
>> Content-Type: text/plain; charset=utf-8
>>
>> Dear OpenChromers
>>
>> I cannot get OpenChrome to work.
>>
>> System: IGEL UD10 TC236, integrated Panel 1920x1080, no EDID
>> Operating System: Xubuntu 20.04
>>
>> The system originally came with an bespoke IGEL-OS (Ubuntu 14.04
>> actually) and had a VIA graphics-driver installed. Screen resolution
>> 1920x1080 (which is not listed in vbeinfo!).
>>
>> I now want to use the system under (x)ubuntu 20.04. With OpenChrome
>> (0.6.0-3) installed (xserver-xorg-video-openchrome), X fails to start
>> and I get a black tty7:
>>
>> [??? 25.575] (EE) CHROME(0): [drm] Failed to open DRM device for
>> pci:0000:00:01.0: No such file or directory
>>
>> [??? 25.631] (II) CHROME(0): EDID for output VGA-1
>> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
>> [??? 25.631] (WW) CHROME(0): No outputs definitely connected, trying
>> again...
>> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
>> [??? 25.631] (WW) CHROME(0): Unable to find connected outputs - setting
>> 1024x768 initial framebuffer
>>
>> [??? 25.654] DRM memory allocation failed -6
>> ?
>> What can I do? Any help is greatly appreciated.
>>
>> Do you need more detailed information? Let me know.
>>
>>
>> Thank you!
>>
>> Jochen
>>
>>
>>
>>
>> below this line: system information and logfiles
>>
>> #####
>> $ hwinfo --cpu
>> 01: None 00.0: 10103 CPU???????????????????????????????????????
>> ? [Created at cpu.465]
>> ? Unique ID: rdCR.j8NaKXDZtZ6
>> ? Hardware Class: cpu
>> ? Arch: X86-64
>> ? Vendor: "CentaurHauls"
>> ? Model: 6.15.13 "VIA Eden X2 U4200 @ 1.0+ GHz"
>> ? Features:
>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,rep_good,nopl,cpuid,pni,monitor,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,popcnt,rng,rng_en,ace,ace_en,ace2,phe,phe_en,pmm,pmm_en,lahf_lm,pti,tpr_shadow,vnmi,ida
>> ? Clock: 1000 MHz
>> ? BogoMips: 2000.20
>> ? Cache: 1024 kb
>> ? Units/Processor: 4
>> ? Config Status: cfg=new, avail=yes, need=no, active=unknown
>>
>> 02: None 01.0: 10103 CPU
>> ? [Created at cpu.465]
>> ? Unique ID: wkFv.j8NaKXDZtZ6
>> ? Hardware Class: cpu
>> ? Arch: X86-64
>> ? Vendor: "CentaurHauls"
>> ? Model: 6.15.13 "VIA Eden X2 U4200 @ 1.0+ GHz"
>> ? Features:
>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,rep_good,nopl,cpuid,pni,monitor,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,popcnt,rng,rng_en,ace,ace_en,ace2,phe,phe_en,pmm,pmm_en,lahf_lm,pti,tpr_shadow,vnmi,ida
>> ? Clock: 800 MHz
>> ? BogoMips: 2000.20
>> ? Cache: 1024 kb
>> ? Units/Processor: 4
>> ? Config Status: cfg=new, avail=yes, need=no, active=unknown
>> $
>>
>> #####
>> $ hwinfo --gfxcard
>> 12: PCI 01.0: 0300 VGA compatible controller (VGA)?????????????
>> ? [Created at pci.386]
>> ? Unique ID: vSkL.wdvg1Nualz4
>> ? SysFS ID: /devices/pci0000:00/0000:00:01.0
>> ? SysFS BusID: 0000:00:01.0
>> ? Hardware Class: graphics card
>> ? Model: "VIA VX900 Graphics [Chrome9 HD]"
>> ? Vendor: pci 0x1106 "VIA Technologies, Inc."
>> ? Device: pci 0x7122 "VX900 Graphics [Chrome9 HD]"
>> ? SubVendor: pci 0x6d86
>> ? SubDevice: pci 0x62cc
>> ? Memory Range: 0xf9000000-0xf9ffffff (rw,non-prefetchable)
>> ? Memory Range: 0xf8000000-0xf8ffffff (rw,non-prefetchable)
>> ? Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
>> ? Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
>> ? IRQ: 11 (no events)
>> ? I/O Port: 0x00 (rw)
>> ? Module Alias: "pci:v00001106d00007122sv00006D86sd000062CCbc03sc00i00"
>> ? Driver Info #0:
>> ??? Driver Status: viafb is not active
>> ??? Driver Activation Cmd: "modprobe viafb"
>> ? Config Status: cfg=new, avail=yes, need=no, active=unknown
>>
>> Primary display adapter: #12
>>
>>
>> #####
>> grubcommand line
>> "quiet splash nomodeset video=VGA-1:e
>> drm_kms_helper.edid_firmware=VGA-1:edid/1280x1024.bin"
>>
>> #####
>> /etc/X11/xorg.conf
>>
>> Section "ServerLayout"
>> ??? Identifier??? "Layout-0"
>> ??? Screen??? ??? "Screen-0"
>> EndSection
>>
>> Section "Screen"
>> ??? Identifier??? "Screen-0"
>> ??? Device??? ??? "Device-0"
>> ??? Monitor??? ??? "Monitor-0"
>> ??? DefaultDepth??? 32
>> ??? Subsection??? "Display"
>> ??? ??? #Depth??? 24
>> ??? ??? Depth??? 32
>> ??? ??? Virtual??? 1920??? 1080
>> ??? ??? #Virtual??? 2560??? 1440
>> ??? ??? #Virtual??? 2560??? 1600
>> ??? EndSubsection
>> EndSection
>>
>> Section "Device"
>> ??? Identifier??? "Device-0"
>> ??? Driver??? ??? "openchrome"
>> ??? BusID??? ??? "PCI:0:1:0"
>> ??? Option??? ??? "ModeDebug"??? ??? "true"
>> ??? Option??? ??? "ActiveDevice"??? ??? "VGA-1"??? ??? # not used
>> ??? Option??? ??? "ExaScratchSize"??? "8192"??? ??? #
>> https://www.freedesktop.org/wiki/Openchrome/Configuration/
>> ??? Option??? ??? "MaxDRIMem"??? ??? "16384"??? ??? #
>> https://www.freedesktop.org/wiki/Openchrome/Configuration/
>> ??? Option??? ??? "MigrationHeuristic"??? "greedy"??? #
>> https://www.freedesktop.org/wiki/Openchrome/Configuration/
>> ??? Option??? ??? "Monitor-VGA-1"??? ??? "Monitor-0"??? #
>> EndSection
>>
>> Section "Monitor"
>> ??? Identifier??? "Monitor-0"
>> ??? #Option??? ??? "PreferredMode"??? ??? "1920x1080"
>> ??? Option??? ??? "PreferredMode"??? ??? "1280x1024"??? # not used
>> ??? Option??? ??? "DPMS"??? ??? ??? "true"
>> ??? #Option??? ??? "Swlinktraining"??? "true"??? ??? # not used
>> EndSection
>>
>> Section "Modes"
>> ??? Identifier??? "Modes-0"
>> ??? #Modeline??? "1280x1024"??? 109.00??? 1280 1368 1496 1712??? 1024
>> 1027 1034 1063??? -hsync??? +vsync
>> ??? Modeline??? "1280x1024"??? 108.00??? 1280 1368 1496 1712??? 1024
>> 1027 1034 1062??? -hsync??? +vsync
>> ??? #Modeline??? "1920x1080"??? 175.50??? 1920 1968 2000 2080??? 1080
>> 1083 1088 1111??? +hsync??? -vsync
>> ??? Modeline??? "1920x1080"??? 175.50??? 1920 2048 2248 2576??? 1080
>> 1083 1088 1121??? -hsync +vsync
>> EndSection
>>
>> Section "Extensions"
>> ??? Option??? "Composite"??? "true"
>> EndSection
>>
>>
>> #####
>> /var/log/Xorg.0.log
>>
>> [??? 25.245]
>> X.Org X Server 1.20.8
>> X Protocol Version 11, Revision 0
>> [??? 25.245] Build Operating System: Linux 4.15.0-115-generic x86_64 Ubuntu
>> [??? 25.245] Current Operating System: Linux ws-ub-42 5.4.0-51-generic
>> #56-Ubuntu SMP Mon Oct 5 14:28:49 UTC 2020 x86_64
>> [??? 25.245] Kernel command line:
>> BOOT_IMAGE=/boot/vmlinuz-5.4.0-51-generic
>> root=UUID=07ab2756-f356-4058-ae7d-108a3d097463 ro quiet splash nomodeset
>> video=VGA-1:e drm_kms_helper.edid_firmware=VGA-1:edid/1280x1024.bin
>> vt.handoff=7
>> [??? 25.248] Build Date: 04 September 2020? 01:34:27PM
>> [??? 25.248] xorg-server 2:1.20.8-2ubuntu2.4 (For technical support
>> please see http://www.ubuntu.com/support)
>> [??? 25.248] Current version of pixman: 0.38.4
>> [??? 25.248] ??? Before reporting problems, check http://wiki.x.org
>> ??? to make sure that you have the latest version.
>> [??? 25.248] Markers: (--) probed, (**) from config file, (==) default
>> setting,
>> ??? (++) from command line, (!!) notice, (II) informational,
>> ??? (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> [??? 25.249] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 17
>> 16:41:46 2020
>> [??? 25.265] (==) Using config file: "/etc/X11/xorg.conf"
>> [??? 25.265] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>> [??? 25.271] (==) ServerLayout "Layout-0"
>> [??? 25.271] (**) |-->Screen "Screen-0" (0)
>> [??? 25.271] (**) |?? |-->Monitor "Monitor-0"
>> [??? 25.273] (**) |?? |-->Device "Device-0"
>> [??? 25.274] (==) Automatically adding devices
>> [??? 25.274] (==) Automatically enabling devices
>> [??? 25.274] (==) Automatically adding GPU devices
>> [??? 25.274] (==) Automatically binding GPU devices
>> [??? 25.274] (==) Max clients allowed: 256, resource mask: 0x1fffff
>> [??? 25.279] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
>> exist.
>> [??? 25.279] ??? Entry deleted from font path.
>> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not
>> exist.
>> [??? 25.280] ??? Entry deleted from font path.
>> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not
>> exist.
>> [??? 25.280] ??? Entry deleted from font path.
>> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/100dpi" does not
>> exist.
>> [??? 25.281] ??? Entry deleted from font path.
>> [??? 25.281] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
>> [??? 25.281] ??? Entry deleted from font path.
>> [??? 25.281] (==) FontPath set to:
>> ??? /usr/share/fonts/X11/misc,
>> ??? /usr/share/fonts/X11/Type1,
>> ??? built-ins
>> [??? 25.281] (==) ModulePath set to "/usr/lib/xorg/modules"
>> [??? 25.281] (**) Extension "Composite" is enabled
>> [??? 25.281] (II) The server relies on udev to provide the list of input
>> devices.
>> ??? If no devices become available, reconfigure udev or disable
>> AutoAddDevices.
>> [??? 25.281] (II) Loader magic: 0x558a187a3020
>> [??? 25.281] (II) Module ABI versions:
>> [??? 25.281] ??? X.Org ANSI C Emulation: 0.4
>> [??? 25.281] ??? X.Org Video Driver: 24.1
>> [??? 25.281] ??? X.Org XInput driver : 24.1
>> [??? 25.281] ??? X.Org Server Extension : 10.0
>> [??? 25.284] (++) using VT number 7
>>
>> [??? 25.285] (II) systemd-logind: logind integration requires -keeptty
>> and -keeptty was not provided, disabling logind integration
>> [??? 25.321] (--) PCI:*(0 at 0:1:0) 1106:7122:6d86:62cc rev 0, Mem @
>> 0xf9000000/16777216, 0xf8000000/16777216, 0xd0000000/268435456, BIOS @
>> 0x????????/131072
>> [??? 25.322] (II) LoadModule: "glx"
>> [??? 25.328] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>> [??? 25.364] (II) Module glx: vendor="X.Org Foundation"
>> [??? 25.364] ??? compiled for 1.20.8, module version = 1.0.0
>> [??? 25.364] ??? ABI class: X.Org Server Extension, version 10.0
>> [??? 25.364] (II) LoadModule: "openchrome"
>> [??? 25.367] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
>> [??? 25.376] (II) Module openchrome:
>> vendor="https://www.freedesktop.org/wiki/Openchrome/"
>> [??? 25.376] ??? compiled for 1.20.0, module version = 0.6.0
>> [??? 25.376] ??? Module class: X.Org Video Driver
>> [??? 25.376] ??? ABI class: X.Org Video Driver, version 24.0
>> [??? 25.376] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
>> ??? KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
>> ??? PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
>> ??? CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
>> ??? P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
>> [??? 25.378] (!!) VIA Technologies does not support this driver in any way.
>> [??? 25.378] (!!) For support, please refer to
>> https://www.freedesktop.org/wiki/Openchrome/.
>> [??? 25.378] (!!) (openchrome 0.6.0 release)
>> [??? 25.378] (II) CHROME(0): viaPreInit
>> [??? 25.378] (II) CHROME(0): VIAGetRec
>> [??? 25.378] (--) CHROME(0): Chipset: VX900
>> [??? 25.384] (--) CHROME(0): Chipset revision: 0
>> [??? 25.575] (EE) CHROME(0): [drm] Failed to open DRM device for
>> pci:0000:00:01.0: No such file or directory
>> [??? 25.576] (II) Loading sub module "vgahw"
>> [??? 25.576] (II) LoadModule: "vgahw"
>> [??? 25.577] (II) Loading /usr/lib/xorg/modules/libvgahw.so
>> [??? 25.578] (II) Module vgahw: vendor="X.Org Foundation"
>> [??? 25.578] ??? compiled for 1.20.8, module version = 0.1.0
>> [??? 25.579] ??? ABI class: X.Org Video Driver, version 24.1
>> [??? 25.579] (--) CHROME(0): Probed amount of VideoRAM = 262144 kB
>> [??? 25.579] (II) CHROME(0): Entered viaMapMMIO.
>> [??? 25.579] (--) CHROME(0): Mapping MMIO at address 0xF8000000 with
>> size 52 KB.
>> [??? 25.579] (--) CHROME(0): Mapping 2D Host BitBLT space at address
>> 0xF8200000 with size 2048 KB.
>> [??? 25.579] (--) CHROME(0): Mapping the frame buffer at address
>> 0xD0000000 with size 262144 KB.
>> [??? 25.586] (--) CHROME(0): Frame buffer start address: 0x7f49ef542000,
>> free start: 0x0 end: 0x10000000
>> [??? 25.586] (II) CHROME(0): Entered viaMMIOEnable.
>> [??? 25.587] (II) CHROME(0): Exiting viaMMIOEnable.
>> [??? 25.587] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
>> [??? 25.587] (II) CHROME(0): Exiting viaMapMMIO.
>> [??? 25.587] (**) CHROME(0): Depth 32, (--) framebuffer bpp 32
>> [??? 25.587] (==) CHROME(0): RGB weight 888
>> [??? 25.587] (==) CHROME(0): Default visual is TrueColor
>> [??? 25.587] (II) CHROME(0): VIASetupDefaultOptions - Setting up default
>> chipset options.
>> [??? 25.587] (**) CHROME(0): Option "ExaScratchSize" "8192"
>> [??? 25.587] (**) CHROME(0): Option "MaxDRIMem" "16384"
>> [??? 25.587] (==) CHROME(0): Shadow framebuffer is disabled.
>> [??? 25.587] (==) CHROME(0): Hardware acceleration is enabled.
>> [??? 25.587] (==) CHROME(0): Using EXA acceleration architecture.
>> [??? 25.588] (==) CHROME(0): EXA composite acceleration enabled.
>> [??? 25.591] (**) CHROME(0): EXA scratch area size is 8192 kB.
>> [??? 25.591] (==) CHROME(0): Using hardware two-color cursors and
>> software full-color cursors.
>> [??? 25.591] (==) CHROME(0): GPU virtual command queue will be enabled.
>> [??? 25.592] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
>> [??? 25.592] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled.
>> [??? 25.592] (==) CHROME(0): PCI DMA will not be used for XV image
>> transfer if DRI is enabled.
>> [??? 25.592] (==) CHROME(0): Xv Bandwidth check is enabled.
>> [??? 25.592] (**) CHROME(0): Will impose a 16384 kB limit on video RAM
>> reserved for DRI.
>> [??? 25.592] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
>> [??? 25.592] (==) CHROME(0): TV dotCrawl is disabled.
>> [??? 25.592] (==) CHROME(0): TV deflicker is set to 0.
>> [??? 25.592] (==) CHROME(0): No default TV type is set.
>> [??? 25.592] (==) CHROME(0): No default TV output signal type is set.
>> [??? 25.592] (==) CHROME(0): Will not print VGA registers.
>> [??? 25.592] (==) CHROME(0): Will not scan I2C buses.
>> [??? 25.592] (II) CHROME(0): Detected MemClk 10
>> [??? 25.592] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 10
>> [??? 25.592] (II) CHROME(0): Detected TV standard: NTSC.
>> [??? 25.592] (II) Loading sub module "ramdac"
>> [??? 25.593] (II) LoadModule: "ramdac"
>> [??? 25.593] (II) Module "ramdac" already built-in
>> [??? 25.593] (II) Loading sub module "i2c"
>> [??? 25.593] (II) LoadModule: "i2c"
>> [??? 25.593] (II) Module "i2c" already built-in
>> [??? 25.593] (II) CHROME(0): Entered ViaI2CInit.
>> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus1Init.
>> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 1" initialized.
>> [??? 25.593] (II) CHROME(0): Exiting ViaI2CBus1Init.
>> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus2Init.
>> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 2" initialized.
>> [??? 25.593] (II) CHROME(0): Exiting ViaI2CBus2Init.
>> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus3Init.
>> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 3" initialized.
>> [??? 25.594] (II) CHROME(0): Exiting ViaI2CBus3Init.
>> [??? 25.594] (II) CHROME(0): Exiting ViaI2CInit.
>> [??? 25.594] (II) Loading sub module "ddc"
>> [??? 25.594] (II) LoadModule: "ddc"
>> [??? 25.594] (II) Module "ddc" already built-in
>> [??? 25.594] (II) CHROME(0): Entered viaOutputDetect.
>> [??? 25.594] (II) CHROME(0): Entered viaProbePinStrapping.
>> [??? 25.594] (II) CHROME(0): Probing VIA Technologies IGP pin strapping
>> . . .
>> [??? 25.594] (II) CHROME(0): SR5A: 0x00
>> [??? 25.594] (II) CHROME(0): Setting 3C5.5A[0] to 0.
>> [??? 25.594] (II) CHROME(0): SR12: 0x00
>> [??? 25.594] (II) CHROME(0): SR13: 0x00
>> [??? 25.594] (II) CHROME(0): Setting 3C5.5A[0] to 1.
>> [??? 25.594] (II) CHROME(0): SR12: 0x00
>> [??? 25.594] (II) CHROME(0): SR13: 0x00
>> [??? 25.595] (II) CHROME(0): LVDS1 + LVDS2 detected.
>> [??? 25.595] (II) CHROME(0): Exiting viaProbePinStrapping.
>> [??? 25.595] (II) CHROME(0): Entered via_analog_init.
>> [??? 25.595] (II) CHROME(0): Output VGA-1 using monitor section Monitor-0
>> [??? 25.595] (**) CHROME(0): Option "PreferredMode" "1280x1024"
>> [??? 25.595] (II) CHROME(0): Exiting via_analog_init.
>> [??? 25.595] (II) CHROME(0): Entered via_tv_init.
>> [??? 25.597] (--) CHROME(0): Did not detect a TV encoder.
>> [??? 25.599] (II) CHROME(0): Exiting via_tv_init.
>> [??? 25.599] (II) CHROME(0): Entered via_dvi_init.
>> [??? 25.599] (II) CHROME(0): Entered viaTMDSInit.
>> [??? 25.599] (II) CHROME(0): SR13: 0x00
>> [??? 25.599] (II) CHROME(0): Integrated TMDS transmitter not found.
>> [??? 25.599] (II) CHROME(0): Exiting viaTMDSInit.
>> [??? 25.599] (II) CHROME(0): Integrated TMDS transmitter for DVI not found.
>> [??? 25.599] (II) CHROME(0): Probing I2C Bus 2 for VT1632.
>> [??? 25.599] (II) CHROME(0): Entered viaVT1632Init.
>> [??? 25.600] (--) CHROME(0): I2C device not found.
>> [??? 25.600] (II) CHROME(0): Exiting viaVT1632Init.
>> [??? 25.600] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
>> [??? 25.600] (II) CHROME(0): Probing I2C Bus 3 for VT1632.
>> [??? 25.600] (II) CHROME(0): Entered viaVT1632Init.
>> [??? 25.601] (--) CHROME(0): I2C device not found.
>> [??? 25.601] (II) CHROME(0): Exiting viaVT1632Init.
>> [??? 25.601] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
>> [??? 25.601] (II) CHROME(0): Probing I2C Bus 2 for SiI 164.
>> [??? 25.601] (II) CHROME(0): Entered viaSiI164Init.
>> [??? 25.602] (--) CHROME(0): I2C device not found.
>> [??? 25.602] (II) CHROME(0): Exiting viaSiI164Init.
>> [??? 25.602] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
>> [??? 25.602] (II) CHROME(0): Probing I2C Bus 3 for SiI 164.
>> [??? 25.602] (II) CHROME(0): Entered viaSiI164Init.
>> [??? 25.603] (--) CHROME(0): I2C device not found.
>> [??? 25.603] (II) CHROME(0): Exiting viaSiI164Init.
>> [??? 25.603] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
>> [??? 25.603] (II) CHROME(0): Exiting via_dvi_init.
>> [??? 25.603] (II) CHROME(0): Exiting viaOutputDetect.
>> [??? 25.603] (**) CHROME(0): Option "ModeDebug" "true"
>> [??? 25.603] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
>> [??? 25.603] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at
>> address 0xA0.
>> [??? 25.624] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
>> [??? 25.624] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
>> [??? 25.624] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at
>> address 0xA0.
>> [??? 25.628] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
>> [??? 25.628] (--) CHROME(0): Now perform manual detection of a VGA monitor.
>> [??? 25.631] (II) CHROME(0): EDID for output VGA-1
>> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
>> [??? 25.631] (WW) CHROME(0): No outputs definitely connected, trying
>> again...
>> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
>> [??? 25.631] (WW) CHROME(0): Unable to find connected outputs - setting
>> 1024x768 initial framebuffer
>> [??? 25.631] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
>> [??? 25.631] (==) CHROME(0): DPI set to (96, 96)
>> [??? 25.631] (II) Loading sub module "fb"
>> [??? 25.631] (II) LoadModule: "fb"
>> [??? 25.632] (II) Loading /usr/lib/xorg/modules/libfb.so
>> [??? 25.638] (II) Module fb: vendor="X.Org Foundation"
>> [??? 25.638] ??? compiled for 1.20.8, module version = 1.0.0
>> [??? 25.638] ??? ABI class: X.Org ANSI C Emulation, version 0.4
>> [??? 25.638] (II) Loading sub module "exa"
>> [??? 25.638] (II) LoadModule: "exa"
>> [??? 25.639] (II) Loading /usr/lib/xorg/modules/libexa.so
>> [??? 25.641] (II) Module exa: vendor="X.Org Foundation"
>> [??? 25.642] ??? compiled for 1.20.8, module version = 2.6.0
>> [??? 25.642] ??? ABI class: X.Org Video Driver, version 24.1
>> [??? 25.642] (II) CHROME(0): VIAScreenInit
>> [??? 25.642] (II) CHROME(0): Frame Buffer From (0,0) To (1920,32767)
>> [??? 25.642] (II) CHROME(0): Using 31687 lines for offscreen memory.
>> [??? 25.642] 8294400 bytes of Linear memory allocated at f000000, handle
>> 94051632263088
>> [??? 25.642] (II) CHROME(0): Entered umsAccelInit.
>> [??? 25.642] 262144 bytes of Linear memory allocated at f7e9000, handle
>> 94051632276352
>> [??? 25.642] (II) CHROME(0): Initializing the 2D engine.
>> [??? 25.642] (II) CHROME(0): Initializing the 3D engine.
>> [??? 25.643] 32 bytes of Linear memory allocated at f829000, handle
>> 94051632276496
>> [??? 25.643] 32 bytes of Linear memory allocated at f829080, handle
>> 94051632276784
>> [??? 25.643] (II) CHROME(0): Exiting umsAccelInit.
>> [??? 25.644] (II) CHROME(0): - Visuals set up
>> [??? 25.645] (II) CHROME(0): - B & W
>> [??? 25.647] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
>> [??? 25.647] (II) EXA(0): Offscreen pixmap area of 260141056 bytes
>> [??? 25.647] (II) EXA(0): Driver registered support for the following
>> operations:
>> [??? 25.647] (II)???????? Solid
>> [??? 25.647] (II)???????? Copy
>> [??? 25.647] (II)???????? Composite (RENDER acceleration)
>> [??? 25.647] (II) CHROME(0): [EXA] Enabled EXA acceleration.
>> [??? 25.647] (==) CHROME(0): Backing store enabled
>> [??? 25.647] (II) CHROME(0): - Backing store set up
>> [??? 25.649] (II) CHROME(0): - SW cursor set up
>> [??? 25.649] (II) CHROME(0): HWCursor ARGB enabled
>> [??? 25.649] 16384 bytes of Linear memory allocated at f829100, handle
>> 94051632300352
>> [??? 25.649] 16384 bytes of Linear memory allocated at f82d100, handle
>> 94051632300432
>> [??? 25.650] (II) CHROME(0): - Def Color map set up
>> [??? 25.651] (II) CHROME(0): - Palette loaded
>> [??? 25.651] (II) CHROME(0): - Color maps etc. set up
>> [??? 25.651] (**) CHROME(0): DPMS enabled
>> [??? 25.651] (II) CHROME(0): - DPMS set up
>> [??? 25.651] (II) CHROME(0): VIAEnterVT
>> [??? 25.651] (II) CHROME(0): Entered viaIGA1Save.
>> [??? 25.652] (II) CHROME(0): Saving sequencer registers.
>> [??? 25.652] (II) CHROME(0): Finished saving sequencer registers.
>> [??? 25.652] (II) CHROME(0): Saving IGA1 registers.
>> [??? 25.652] (II) CHROME(0): Finished saving IGA1 registers.
>> [??? 25.652] (II) CHROME(0): Exiting viaIGA1Save.
>> [??? 25.652] (II) CHROME(0): Entered iga2_crtc_save.
>> [??? 25.652] (II) CHROME(0): Entered viaIGA2Save.
>> [??? 25.652] (II) CHROME(0): Saving IGA2 registers.
>> [??? 25.652] (II) CHROME(0): Finished saving IGA2 registers.
>> [??? 25.652] (II) CHROME(0): Exiting viaIGA2Save.
>> [??? 25.652] (II) CHROME(0): Exiting iga2_crtc_save.
>> [??? 25.652] (II) CHROME(0): Entered via_analog_dpms.
>> [??? 25.652] (II) CHROME(0): Entered viaAnalogOutput.
>> [??? 25.653] (II) CHROME(0): Analog VGA Output: Off
>> [??? 25.653] (II) CHROME(0): Exiting viaAnalogOutput.
>> [??? 25.653] (II) CHROME(0): Exiting via_analog_dpms.
>> [??? 25.653] (II) CHROME(0): Entered iga1_crtc_dpms.
>> [??? 25.653] (II) CHROME(0): Entered viaIGA1DPMSControl.
>> [??? 25.653] (II) CHROME(0): Exiting viaIGA1DPMSControl.
>> [??? 25.653] (II) CHROME(0): Exiting iga1_crtc_dpms.
>> [??? 25.653] (II) CHROME(0): Entered iga2_crtc_dpms.
>> [??? 25.653] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>> [??? 25.653] (II) CHROME(0): IGA2 Display Output: Off
>> [??? 25.653] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>> [??? 25.653] (II) CHROME(0): Exiting iga2_crtc_dpms.
>> [??? 25.653] (II) CHROME(0): Entered via_analog_dpms.
>> [??? 25.653] (II) CHROME(0): Entered viaAnalogOutput.
>> [??? 25.653] (II) CHROME(0): Analog VGA Output: Off
>> [??? 25.653] (II) CHROME(0): Exiting viaAnalogOutput.
>> [??? 25.653] (II) CHROME(0): Exiting via_analog_dpms.
>> [??? 25.653] (II) CHROME(0): Entered iga1_crtc_dpms.
>> [??? 25.654] (II) CHROME(0): Entered viaIGA1DPMSControl.
>> [??? 25.654] (II) CHROME(0): Exiting viaIGA1DPMSControl.
>> [??? 25.654] (II) CHROME(0): Exiting iga1_crtc_dpms.
>> [??? 25.654] (II) CHROME(0): Entered iga2_crtc_dpms.
>> [??? 25.654] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>> [??? 25.654] (II) CHROME(0): IGA2 Display Output: Off
>> [??? 25.654] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>> [??? 25.654] (II) CHROME(0): Exiting iga2_crtc_dpms.
>> [??? 25.654] DRM memory allocation failed -6
>> [??? 25.654] (II) CHROME(0): Using default xfree86 memcpy for video.
>> [??? 25.654] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
>> [??? 25.654] (WW) CHROME(0): Option "ActiveDevice" is not used
>> [??? 25.654] (WW) CHROME(0): Option "PreferredMode" is not used
>> [??? 25.655] (II) CHROME(0): - Done
>> [??? 25.655] (II) Initializing extension Generic Event Extension
>> [??? 25.655] (II) Initializing extension SHAPE
>> [??? 25.656] (II) Initializing extension MIT-SHM
>> [??? 25.657] (II) Initializing extension XInputExtension
>> [??? 25.660] (II) Initializing extension XTEST
>> [??? 25.661] (II) Initializing extension BIG-REQUESTS
>> [??? 25.661] (II) Initializing extension SYNC
>> [??? 25.662] (II) Initializing extension XKEYBOARD
>> [??? 25.663] (II) Initializing extension XC-MISC
>> [??? 25.663] (II) Initializing extension SECURITY
>> [??? 25.664] (II) Initializing extension XFIXES
>> [??? 25.665] (II) Initializing extension RENDER
>> [??? 25.665] (II) Initializing extension RANDR
>> [??? 25.666] (II) Initializing extension COMPOSITE
>> [??? 25.667] (II) Initializing extension DAMAGE
>> [??? 25.671] (II) Initializing extension MIT-SCREEN-SAVER
>> [??? 25.672] (II) Initializing extension DOUBLE-BUFFER
>> [??? 25.673] (II) Initializing extension RECORD
>> [??? 25.673] (II) Initializing extension DPMS
>> [??? 25.674] (II) Initializing extension Present
>> [??? 25.674] (II) Initializing extension DRI3
>> [??? 25.675] (II) Initializing extension X-Resource
>> [??? 25.675] (II) Initializing extension XVideo
>> [??? 25.676] (II) Initializing extension XVideo-MotionCompensation
>> [??? 25.676] (II) Initializing extension SELinux
>> [??? 25.676] (II) SELinux: Disabled on system
>> [??? 25.676] (II) Initializing extension GLX
>> [??? 25.677] (II) AIGLX: Screen 0 is not DRI2 capable
>> [??? 26.147] (II) IGLX: Loaded and initialized swrast
>> [??? 26.149] (II) GLX: Initialized DRISWRAST GL provider for screen 0
>> [??? 26.149] (II) Initializing extension XFree86-VidModeExtension
>> [??? 26.150] (II) Initializing extension XFree86-DGA
>> [??? 26.151] (II) Initializing extension XFree86-DRI
>> [??? 26.152] (II) Initializing extension DRI2
>> [??? 26.542] (II) config/udev: Adding input device Power Button
>> (/dev/input/event2)
>> [??? 26.543] (**) Power Button: Applying InputClass "libinput keyboard
>> catchall"
>> [??? 26.543] (II) LoadModule: "libinput"
>> [??? 26.545] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
>> [??? 26.561] (II) Module libinput: vendor="X.Org Foundation"
>> [??? 26.561] ??? compiled for 1.20.4, module version = 0.29.0
>> [??? 26.561] ??? Module class: X.Org XInput Driver
>> [??? 26.561] ??? ABI class: X.Org XInput driver, version 24.1
>> [??? 26.561] (II) Using input driver 'libinput' for 'Power Button'
>> [??? 26.561] (**) Power Button: always reports core events
>> [??? 26.561] (**) Option "Device" "/dev/input/event2"
>> [??? 26.561] (**) Option "_source" "server/udev"
>> [??? 26.582] (II) event2? - Power Button: is tagged by udev as: Keyboard
>> [??? 26.583] (II) event2? - Power Button: device is a keyboard
>> [??? 26.583] (II) event2? - Power Button: device removed
>> [??? 26.600] (**) Option "config_info"
>> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
>> [??? 26.600] (II) XINPUT: Adding extended input device "Power Button"
>> (type: KEYBOARD, id 6)
>> [??? 26.600] (**) Option "xkb_model" "pc105"
>> [??? 26.600] (**) Option "xkb_layout" "de"
>> [??? 26.739] (II) event2? - Power Button: is tagged by udev as: Keyboard
>> [??? 26.740] (II) event2? - Power Button: device is a keyboard
>> [??? 26.744] (II) config/udev: Adding input device Video Bus
>> (/dev/input/event3)
>> [??? 26.745] (**) Video Bus: Applying InputClass "libinput keyboard
>> catchall"
>> [??? 26.745] (II) Using input driver 'libinput' for 'Video Bus'
>> [??? 26.745] (**) Video Bus: always reports core events
>> [??? 26.745] (**) Option "Device" "/dev/input/event3"
>> [??? 26.745] (**) Option "_source" "server/udev"
>> [??? 26.752] (II) event3? - Video Bus: is tagged by udev as: Keyboard
>> [??? 26.752] (II) event3? - Video Bus: device is a keyboard
>> [??? 26.753] (II) event3? - Video Bus: device removed
>> [??? 26.776] (**) Option "config_info"
>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event3"
>> [??? 26.776] (II) XINPUT: Adding extended input device "Video Bus"
>> (type: KEYBOARD, id 7)
>> [??? 26.776] (**) Option "xkb_model" "pc105"
>> [??? 26.776] (**) Option "xkb_layout" "de"
>> [??? 26.784] (II) event3? - Video Bus: is tagged by udev as: Keyboard
>> [??? 26.784] (II) event3? - Video Bus: device is a keyboard
>> [??? 26.788] (II) config/udev: Adding input device Power Button
>> (/dev/input/event1)
>> [??? 26.788] (**) Power Button: Applying InputClass "libinput keyboard
>> catchall"
>> [??? 26.789] (II) Using input driver 'libinput' for 'Power Button'
>> [??? 26.789] (**) Power Button: always reports core events
>> [??? 26.789] (**) Option "Device" "/dev/input/event1"
>> [??? 26.789] (**) Option "_source" "server/udev"
>> [??? 26.795] (II) event1? - Power Button: is tagged by udev as: Keyboard
>> [??? 26.795] (II) event1? - Power Button: device is a keyboard
>> [??? 26.796] (II) event1? - Power Button: device removed
>> [??? 26.812] (**) Option "config_info"
>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
>> [??? 26.812] (II) XINPUT: Adding extended input device "Power Button"
>> (type: KEYBOARD, id 8)
>> [??? 26.812] (**) Option "xkb_model" "pc105"
>> [??? 26.812] (**) Option "xkb_layout" "de"
>> [??? 26.819] (II) event1? - Power Button: is tagged by udev as: Keyboard
>> [??? 26.820] (II) event1? - Power Button: device is a keyboard
>> [??? 26.824] (II) config/udev: Adding input device Sleep Button
>> (/dev/input/event0)
>> [??? 26.824] (**) Sleep Button: Applying InputClass "libinput keyboard
>> catchall"
>> [??? 26.824] (II) Using input driver 'libinput' for 'Sleep Button'
>> [??? 26.824] (**) Sleep Button: always reports core events
>> [??? 26.824] (**) Option "Device" "/dev/input/event0"
>> [??? 26.824] (**) Option "_source" "server/udev"
>> [??? 26.830] (II) event0? - Sleep Button: is tagged by udev as: Keyboard
>> [??? 26.831] (II) event0? - Sleep Button: device is a keyboard
>> [??? 26.831] (II) event0? - Sleep Button: device removed
>> [??? 26.836] (**) Option "config_info"
>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
>> [??? 26.836] (II) XINPUT: Adding extended input device "Sleep Button"
>> (type: KEYBOARD, id 9)
>> [??? 26.836] (**) Option "xkb_model" "pc105"
>> [??? 26.837] (**) Option "xkb_layout" "de"
>> [??? 26.844] (II) event0? - Sleep Button: is tagged by udev as: Keyboard
>> [??? 26.844] (II) event0? - Sleep Button: device is a keyboard
>> [??? 26.847] (II) config/udev: Adding input device HD-Audio Generic
>> HDMI/DP,pcm=3 (/dev/input/event8)
>> [??? 26.848] (II) No input driver specified, ignoring this device.
>> [??? 26.848] (II) This device may have been added with another device file.
>> [??? 26.855] (II) config/udev: Adding input device Logitech USB Optical
>> Mouse (/dev/input/event4)
>> [??? 26.855] (**) Logitech USB Optical Mouse: Applying InputClass
>> "libinput pointer catchall"
>> [??? 26.855] (II) Using input driver 'libinput' for 'Logitech USB
>> Optical Mouse'
>> [??? 26.855] (**) Logitech USB Optical Mouse: always reports core events
>> [??? 26.855] (**) Option "Device" "/dev/input/event4"
>> [??? 26.855] (**) Option "_source" "server/udev"
>> [??? 26.865] (II) event4? - Logitech USB Optical Mouse: is tagged by
>> udev as: Mouse
>> [??? 26.865] (II) event4? - Logitech USB Optical Mouse: device is a pointer
>> [??? 26.866] (II) event4? - Logitech USB Optical Mouse: device removed
>> [??? 26.900] (**) Option "config_info"
>> "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C077.0001/input/input7/event4"
>> [??? 26.900] (II) XINPUT: Adding extended input device "Logitech USB
>> Optical Mouse" (type: MOUSE, id 10)
>> [??? 26.901] (**) Option "AccelerationScheme" "none"
>> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
>> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) acceleration
>> factor: 2.000
>> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) acceleration
>> threshold: 4
>> [??? 26.911] (II) event4? - Logitech USB Optical Mouse: is tagged by
>> udev as: Mouse
>> [??? 26.912] (II) event4? - Logitech USB Optical Mouse: device is a pointer
>> [??? 26.917] (II) config/udev: Adding input device Logitech USB Optical
>> Mouse (/dev/input/mouse0)
>> [??? 26.917] (II) No input driver specified, ignoring this device.
>> [??? 26.917] (II) This device may have been added with another device file.
>> [??? 26.922] (II) config/udev: Adding input device Chicony HP Elite USB
>> Keyboard (/dev/input/event5)
>> [??? 26.922] (**) Chicony HP Elite USB Keyboard: Applying InputClass
>> "libinput keyboard catchall"
>> [??? 26.922] (II) Using input driver 'libinput' for 'Chicony HP Elite
>> USB Keyboard'
>> [??? 26.923] (**) Chicony HP Elite USB Keyboard: always reports core events
>> [??? 26.923] (**) Option "Device" "/dev/input/event5"
>> [??? 26.923] (**) Option "_source" "server/udev"
>> [??? 26.933] (II) event5? - Chicony HP Elite USB Keyboard: is tagged by
>> udev as: Keyboard
>> [??? 26.934] (II) event5? - Chicony HP Elite USB Keyboard: device is a
>> keyboard
>> [??? 26.935] (II) event5? - Chicony HP Elite USB Keyboard: device removed
>> [??? 26.944] (**) Option "config_info"
>> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/0003:03F0:034A.0002/input/input8/event5"
>> [??? 26.944] (II) XINPUT: Adding extended input device "Chicony HP Elite
>> USB Keyboard" (type: KEYBOARD, id 11)
>> [??? 26.944] (**) Option "xkb_model" "pc105"
>> [??? 26.945] (**) Option "xkb_layout" "de"
>> [??? 26.956] (II) event5? - Chicony HP Elite USB Keyboard: is tagged by
>> udev as: Keyboard
>> [??? 26.957] (II) event5? - Chicony HP Elite USB Keyboard: device is a
>> keyboard
>> [??? 26.964] (II) config/udev: Adding input device Chicony HP Elite USB
>> Keyboard Consumer Control (/dev/input/event7)
>> [??? 26.964] (**) Chicony HP Elite USB Keyboard Consumer Control:
>> Applying InputClass "libinput keyboard catchall"
>> [??? 26.964] (II) Using input driver 'libinput' for 'Chicony HP Elite
>> USB Keyboard Consumer Control'
>> [??? 26.964] (**) Chicony HP Elite USB Keyboard Consumer Control: always
>> reports core events
>> [??? 26.964] (**) Option "Device" "/dev/input/event7"
>> [??? 26.964] (**) Option "_source" "server/udev"
>> [??? 26.975] (II) event7? - Chicony HP Elite USB Keyboard Consumer
>> Control: is tagged by udev as: Keyboard
>> [??? 26.976] (II) event7? - Chicony HP Elite USB Keyboard Consumer
>> Control: device is a keyboard
>> [??? 26.977] (II) event7? - Chicony HP Elite USB Keyboard Consumer
>> Control: device removed
>> [??? 26.996] (II) libinput: Chicony HP Elite USB Keyboard Consumer
>> Control: needs a virtual subdevice
>> [??? 26.996] (**) Option "config_info"
>> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input10/event7"
>> [??? 26.996] (II) XINPUT: Adding extended input device "Chicony HP Elite
>> USB Keyboard Consumer Control" (type: MOUSE, id 12)
>> [??? 26.997] (**) Option "AccelerationScheme" "none"
>> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control:
>> (accel) selected scheme none/0
>> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control:
>> (accel) acceleration factor: 2.000
>> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control:
>> (accel) acceleration threshold: 4
>> [??? 27.008] (II) event7? - Chicony HP Elite USB Keyboard Consumer
>> Control: is tagged by udev as: Keyboard
>> [??? 27.008] (II) event7? - Chicony HP Elite USB Keyboard Consumer
>> Control: device is a keyboard
>> [??? 27.015] (II) config/udev: Adding input device Chicony HP Elite USB
>> Keyboard System Control (/dev/input/event6)
>> [??? 27.015] (**) Chicony HP Elite USB Keyboard System Control: Applying
>> InputClass "libinput keyboard catchall"
>> [??? 27.015] (II) Using input driver 'libinput' for 'Chicony HP Elite
>> USB Keyboard System Control'
>> [??? 27.015] (**) Chicony HP Elite USB Keyboard System Control: always
>> reports core events
>> [??? 27.015] (**) Option "Device" "/dev/input/event6"
>> [??? 27.015] (**) Option "_source" "server/udev"
>> [??? 27.026] (II) event6? - Chicony HP Elite USB Keyboard System
>> Control: is tagged by udev as: Keyboard
>> [??? 27.026] (II) event6? - Chicony HP Elite USB Keyboard System
>> Control: device is a keyboard
>> [??? 27.028] (II) event6? - Chicony HP Elite USB Keyboard System
>> Control: device removed
>> [??? 27.044] (**) Option "config_info"
>> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input9/event6"
>> [??? 27.044] (II) XINPUT: Adding extended input device "Chicony HP Elite
>> USB Keyboard System Control" (type: KEYBOARD, id 13)
>> [??? 27.044] (**) Option "xkb_model" "pc105"
>> [??? 27.044] (**) Option "xkb_layout" "de"
>> [??? 27.056] (II) event6? - Chicony HP Elite USB Keyboard System
>> Control: is tagged by udev as: Keyboard
>> [??? 27.056] (II) event6? - Chicony HP Elite USB Keyboard System
>> Control: device is a keyboard
>> [??? 27.110] (**) Chicony HP Elite USB Keyboard Consumer Control:
>> Applying InputClass "libinput keyboard catchall"
>> [??? 27.111] (II) Using input driver 'libinput' for 'Chicony HP Elite
>> USB Keyboard Consumer Control'
>> [??? 27.111] (**) Chicony HP Elite USB Keyboard Consumer Control: always
>> reports core events
>> [??? 27.111] (**) Option "Device" "/dev/input/event7"
>> [??? 27.111] (**) Option "_source" "_driver/libinput"
>> [??? 27.111] (II) libinput: Chicony HP Elite USB Keyboard Consumer
>> Control: is a virtual subdevice
>> [??? 27.111] (**) Option "config_info"
>> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input10/event7"
>> [??? 27.111] (II) XINPUT: Adding extended input device "Chicony HP Elite
>> USB Keyboard Consumer Control" (type: KEYBOARD, id 14)
>> [??? 27.111] (**) Option "xkb_model" "pc105"
>> [??? 27.112] (**) Option "xkb_layout" "de"
>>
>>
>>
> 
> 