[openchrome-users] Failed to open DRM device - DRM memory allocation failed -6

[Kevin Brace]

Hi Jochen,

I planned to reply to you on Friday, but there was some urgent business I had to take care of, so I am responding now.
Yes, as you correctly pointed out, you will be compiling  a special drm-next based Linux kernel with OpenChrome DRM.

https://cgit.freedesktop.org/openchrome/drm-openchrome/

The above location you stated is the correct location.
Right now, I am in the process of fixing the code of drm-next-5.10 branch.
I do have a rather large patch that fixes the issue of the current repository code of drm-next-5.10 branch, so that it will compile and run correctly (as of this writing, the code in the drm-next-5.10 will not compile correctly).
However, when I commit code changes, I typically break the code changes into small changes, and this takes some time to do it correctly.
For drm-next-5.10 development cycle, some other developers made big changes to one feature OpenChrome DRM uses, and as a result, I will likely need to commit 15 to 16 commits to get the code to compile and function correctly.
This is fairly unusual.
It took me about 5 days to get the code under control for drm-next-5.10 branch where 1 to 2 days is typical per Linux kernel development cycle (i.e., drm-next-5.7, drm-next-5.8, etc.).
Right now, I do have a different urgent business I need to take care of for the next 5 days, so I will need to reduce my workload.
I do not expect drm-next-5.10 branch to be useable until middle of next week.
    That being said, if you decide to proceed to compile drm-next-5.10 version of Linux kernel with OpenChrome, here is how you will do it.
Although the instructions are a little dated, largely follow the instructions listed in this mailing list post.

https://lists.freedesktop.org/archives/openchrome-devel/2017-November/003505.html

Since Linux kernel 4.16 or later, you will likely have to install flex, bison, and libelf-dev packages for the kernel compilation to succeed.

sudo apt-get install flex bison libelf-dev

Perform the above apt-get operation, in addition to what is specified for section 1.
Since you compiled the Ubuntu Linux kernel, you likely already have them installed.
For section 4, CONFIG_DRM_VIA has now changed to CONFIG_DRM_OPENCHROME.
Make sure "CONFIG_DRM_OPENCHROME=m" is in the .config file somewhere.
Other than that, the procedure for compiling and installing a custom, non-package manager based Linux kernel is pretty much the same.
When you encounter OpenChrome DRM related compilation errors, I can e-mail you a temporary large patch that resolves the compilation issues.
The patch will be no use after I make the 15 to 16 commits I have already discussed.
For this version (drm-next-5.10 branch code), OpenChrome DDX also needs changes to the code, and I can provide a patch for that as well.
    Regarding compiling Ubuntu Linux kernel images, I do not do this for OpenChrome DRM development, even though I do use Ubuntu based OS (Lubuntu / Xubuntu) as a primary development / test platform.
What this means is that Ubuntu Linux kernel compilation page is not going to be used, although it is sometimes helpful for reference purposes.
One major reason for not compiling Ubuntu Linux kernel is that Ubuntu Linux kernel does not contain OpenChrome DRM since it is yet to be mainlined into the Linux kernel tree in the first place.
Sorry, you had to waste time on compiling the Linux kernel.

Regards,

Kevin Brace
Brace Computer Laboratory blog
https://bracecomputerlab.com


> Sent: Wednesday, October 21, 2020 at 3:13 AM
> From: next.step.now at t-online.de
> To: openchrome-users at lists.freedesktop.org, "Kevin Brace" <kevinbrace at gmx.com>
> Subject: Re: Failed to open DRM device - DRM memory allocation failed -6
>
> Hi Kevin,
>
> Thanks for your reply.
>
> I was hoping there was just a configuration error, also because X does
> not seem to find a monitor at all.
>
> > Using this "out of tree" OpenChrome DRM requires the user
> > to compile and install a custom Linux kernel.
>
> Well, if this is the route to go ...
>
> So I set up the Igel for kernel building. I have not done anyhing like
> this before so followed the instructions given here:
> https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel
>
> It took 13 hours to build but eventually the test seemd to be
> successful. No error messages but 10 new .deb-files:
> linux-buildinfo-5.4.0-51-generic_5.4.0-51.56_amd64.deb
> linux-image-unsigned-5.4.0-51-generic_5.4.0-51.56_amd64.deb
> linux-cloud-tools-5.4.0-51_5.4.0-51.56_amd64.deb
> linux-modules-5.4.0-51-generic_5.4.0-51.56_amd64.deb
> linux-cloud-tools-5.4.0-51-generic_5.4.0-51.56_amd64.deb
> linux-modules-extra-5.4.0-51-generic_5.4.0-51.56_amd64.deb
> linux-headers-5.4.0-51_5.4.0-51.56_all.deb
> linux-tools-5.4.0-51_5.4.0-51.56_amd64.deb
> linux-headers-5.4.0-51-generic_5.4.0-51.56_amd64.deb
> linux-tools-5.4.0-51-generic_5.4.0-51.56_amd64.deb
>
>
> Could you please point me to some documentation about how to proceed
> from here?
>
> On https://cgit.freedesktop.org/openchrome/drm-openchrome/ I found
> various tree versions drm-next-5.x and master
>
> also this link
>
> git://anongit.freedesktop.org/openchrome/drm-openchrome
>
>
> Whether they are relevant for me and if so, how to use them - I do not know.
>
> Thank you.
>
> Regards
>
>
> Jochen
>
>
>
>
> Am 19.10.20 um 20:54 schrieb Kevin Brace:
> > Hi Jochen,
> >
> > I am not very familiar with this device (IGEL UD10).
> > It is possible that your previous OS installation used VIA Technologies written DDX.
> > I know that one supports VX900 chipset's integrated DVI / HDMI transmitter.
> > As of now, OpenChrome DDX does not support VX900 chipset's DVI / HDMI transmitter.
> > The only exception is to use in-development OpenChrome DRM with OpenChrome DDX.
> > The previous developer who worked on OpenChrome DRM ported VIA Technologies VX900 chipset's DVI / HDMI transmitter's code to OpenChrome DRM, but if the current OpenChrome DDX uses OpenChrome DRM, acceleration will be turned off.
> > Using this "out of tree" OpenChrome DRM requires the user to compile and install a custom Linux kernel.
> > It typically takes about 20 to 25 GB of free storage for doing this (I do work on this regularly.).
> >
> > Regards,
> >
> > Kevin Brace
> > Brace Computer Laboratory blog
> > https://bracecomputerlab.com
> >
> >
> >> Date: Sat, 17 Oct 2020 17:50:29 +0200
> >> From: next.step.now at t-online.de
> >> To: openchrome-users at lists.freedesktop.org
> >> Subject: [openchrome-users] Failed to open DRM device - DRM memory
> >> 	allocation failed -6
> >> Message-ID: <ef44d318-a962-3aba-3ce8-e54bfbdb6921 at t-online.de>
> >> Content-Type: text/plain; charset=utf-8
> >>
> >> Dear OpenChromers
> >>
> >> I cannot get OpenChrome to work.
> >>
> >> System: IGEL UD10 TC236, integrated Panel 1920x1080, no EDID
> >> Operating System: Xubuntu 20.04
> >>
> >> The system originally came with an bespoke IGEL-OS (Ubuntu 14.04
> >> actually) and had a VIA graphics-driver installed. Screen resolution
> >> 1920x1080 (which is not listed in vbeinfo!).
> >>
> >> I now want to use the system under (x)ubuntu 20.04. With OpenChrome
> >> (0.6.0-3) installed (xserver-xorg-video-openchrome), X fails to start
> >> and I get a black tty7:
> >>
> >> [??? 25.575] (EE) CHROME(0): [drm] Failed to open DRM device for
> >> pci:0000:00:01.0: No such file or directory
> >>
> >> [??? 25.631] (II) CHROME(0): EDID for output VGA-1
> >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
> >> [??? 25.631] (WW) CHROME(0): No outputs definitely connected, trying
> >> again...
> >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
> >> [??? 25.631] (WW) CHROME(0): Unable to find connected outputs - setting
> >> 1024x768 initial framebuffer
> >>
> >> [??? 25.654] DRM memory allocation failed -6
> >> ?
> >> What can I do? Any help is greatly appreciated.
> >>
> >> Do you need more detailed information? Let me know.
> >>
> >>
> >> Thank you!
> >>
> >> Jochen
> >>
> >>
> >>
> >>
> >> below this line: system information and logfiles
> >>
> >> #####
> >> $ hwinfo --cpu
> >> 01: None 00.0: 10103 CPU???????????????????????????????????????
> >> ? [Created at cpu.465]
> >> ? Unique ID: rdCR.j8NaKXDZtZ6
> >> ? Hardware Class: cpu
> >> ? Arch: X86-64
> >> ? Vendor: "CentaurHauls"
> >> ? Model: 6.15.13 "VIA Eden X2 U4200 @ 1.0+ GHz"
> >> ? Features:
> >> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,rep_good,nopl,cpuid,pni,monitor,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,popcnt,rng,rng_en,ace,ace_en,ace2,phe,phe_en,pmm,pmm_en,lahf_lm,pti,tpr_shadow,vnmi,ida
> >> ? Clock: 1000 MHz
> >> ? BogoMips: 2000.20
> >> ? Cache: 1024 kb
> >> ? Units/Processor: 4
> >> ? Config Status: cfg=new, avail=yes, need=no, active=unknown
> >>
> >> 02: None 01.0: 10103 CPU
> >> ? [Created at cpu.465]
> >> ? Unique ID: wkFv.j8NaKXDZtZ6
> >> ? Hardware Class: cpu
> >> ? Arch: X86-64
> >> ? Vendor: "CentaurHauls"
> >> ? Model: 6.15.13 "VIA Eden X2 U4200 @ 1.0+ GHz"
> >> ? Features:
> >> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,rep_good,nopl,cpuid,pni,monitor,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,popcnt,rng,rng_en,ace,ace_en,ace2,phe,phe_en,pmm,pmm_en,lahf_lm,pti,tpr_shadow,vnmi,ida
> >> ? Clock: 800 MHz
> >> ? BogoMips: 2000.20
> >> ? Cache: 1024 kb
> >> ? Units/Processor: 4
> >> ? Config Status: cfg=new, avail=yes, need=no, active=unknown
> >> $
> >>
> >> #####
> >> $ hwinfo --gfxcard
> >> 12: PCI 01.0: 0300 VGA compatible controller (VGA)?????????????
> >> ? [Created at pci.386]
> >> ? Unique ID: vSkL.wdvg1Nualz4
> >> ? SysFS ID: /devices/pci0000:00/0000:00:01.0
> >> ? SysFS BusID: 0000:00:01.0
> >> ? Hardware Class: graphics card
> >> ? Model: "VIA VX900 Graphics [Chrome9 HD]"
> >> ? Vendor: pci 0x1106 "VIA Technologies, Inc."
> >> ? Device: pci 0x7122 "VX900 Graphics [Chrome9 HD]"
> >> ? SubVendor: pci 0x6d86
> >> ? SubDevice: pci 0x62cc
> >> ? Memory Range: 0xf9000000-0xf9ffffff (rw,non-prefetchable)
> >> ? Memory Range: 0xf8000000-0xf8ffffff (rw,non-prefetchable)
> >> ? Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
> >> ? Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
> >> ? IRQ: 11 (no events)
> >> ? I/O Port: 0x00 (rw)
> >> ? Module Alias: "pci:v00001106d00007122sv00006D86sd000062CCbc03sc00i00"
> >> ? Driver Info #0:
> >> ??? Driver Status: viafb is not active
> >> ??? Driver Activation Cmd: "modprobe viafb"
> >> ? Config Status: cfg=new, avail=yes, need=no, active=unknown
> >>
> >> Primary display adapter: #12
> >>
> >>
> >> #####
> >> grubcommand line
> >> "quiet splash nomodeset video=VGA-1:e
> >> drm_kms_helper.edid_firmware=VGA-1:edid/1280x1024.bin"
> >>
> >> #####
> >> /etc/X11/xorg.conf
> >>
> >> Section "ServerLayout"
> >> ??? Identifier??? "Layout-0"
> >> ??? Screen??? ??? "Screen-0"
> >> EndSection
> >>
> >> Section "Screen"
> >> ??? Identifier??? "Screen-0"
> >> ??? Device??? ??? "Device-0"
> >> ??? Monitor??? ??? "Monitor-0"
> >> ??? DefaultDepth??? 32
> >> ??? Subsection??? "Display"
> >> ??? ??? #Depth??? 24
> >> ??? ??? Depth??? 32
> >> ??? ??? Virtual??? 1920??? 1080
> >> ??? ??? #Virtual??? 2560??? 1440
> >> ??? ??? #Virtual??? 2560??? 1600
> >> ??? EndSubsection
> >> EndSection
> >>
> >> Section "Device"
> >> ??? Identifier??? "Device-0"
> >> ??? Driver??? ??? "openchrome"
> >> ??? BusID??? ??? "PCI:0:1:0"
> >> ??? Option??? ??? "ModeDebug"??? ??? "true"
> >> ??? Option??? ??? "ActiveDevice"??? ??? "VGA-1"??? ??? # not used
> >> ??? Option??? ??? "ExaScratchSize"??? "8192"??? ??? #
> >> https://www.freedesktop.org/wiki/Openchrome/Configuration/
> >> ??? Option??? ??? "MaxDRIMem"??? ??? "16384"??? ??? #
> >> https://www.freedesktop.org/wiki/Openchrome/Configuration/
> >> ??? Option??? ??? "MigrationHeuristic"??? "greedy"??? #
> >> https://www.freedesktop.org/wiki/Openchrome/Configuration/
> >> ??? Option??? ??? "Monitor-VGA-1"??? ??? "Monitor-0"??? #
> >> EndSection
> >>
> >> Section "Monitor"
> >> ??? Identifier??? "Monitor-0"
> >> ??? #Option??? ??? "PreferredMode"??? ??? "1920x1080"
> >> ??? Option??? ??? "PreferredMode"??? ??? "1280x1024"??? # not used
> >> ??? Option??? ??? "DPMS"??? ??? ??? "true"
> >> ??? #Option??? ??? "Swlinktraining"??? "true"??? ??? # not used
> >> EndSection
> >>
> >> Section "Modes"
> >> ??? Identifier??? "Modes-0"
> >> ??? #Modeline??? "1280x1024"??? 109.00??? 1280 1368 1496 1712??? 1024
> >> 1027 1034 1063??? -hsync??? +vsync
> >> ??? Modeline??? "1280x1024"??? 108.00??? 1280 1368 1496 1712??? 1024
> >> 1027 1034 1062??? -hsync??? +vsync
> >> ??? #Modeline??? "1920x1080"??? 175.50??? 1920 1968 2000 2080??? 1080
> >> 1083 1088 1111??? +hsync??? -vsync
> >> ??? Modeline??? "1920x1080"??? 175.50??? 1920 2048 2248 2576??? 1080
> >> 1083 1088 1121??? -hsync +vsync
> >> EndSection
> >>
> >> Section "Extensions"
> >> ??? Option??? "Composite"??? "true"
> >> EndSection
> >>
> >>
> >> #####
> >> /var/log/Xorg.0.log
> >>
> >> [??? 25.245]
> >> X.Org X Server 1.20.8
> >> X Protocol Version 11, Revision 0
> >> [??? 25.245] Build Operating System: Linux 4.15.0-115-generic x86_64 Ubuntu
> >> [??? 25.245] Current Operating System: Linux ws-ub-42 5.4.0-51-generic
> >> #56-Ubuntu SMP Mon Oct 5 14:28:49 UTC 2020 x86_64
> >> [??? 25.245] Kernel command line:
> >> BOOT_IMAGE=/boot/vmlinuz-5.4.0-51-generic
> >> root=UUID=07ab2756-f356-4058-ae7d-108a3d097463 ro quiet splash nomodeset
> >> video=VGA-1:e drm_kms_helper.edid_firmware=VGA-1:edid/1280x1024.bin
> >> vt.handoff=7
> >> [??? 25.248] Build Date: 04 September 2020? 01:34:27PM
> >> [??? 25.248] xorg-server 2:1.20.8-2ubuntu2.4 (For technical support
> >> please see http://www.ubuntu.com/support)
> >> [??? 25.248] Current version of pixman: 0.38.4
> >> [??? 25.248] ??? Before reporting problems, check http://wiki.x.org
> >> ??? to make sure that you have the latest version.
> >> [??? 25.248] Markers: (--) probed, (**) from config file, (==) default
> >> setting,
> >> ??? (++) from command line, (!!) notice, (II) informational,
> >> ??? (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> [??? 25.249] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 17
> >> 16:41:46 2020
> >> [??? 25.265] (==) Using config file: "/etc/X11/xorg.conf"
> >> [??? 25.265] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> >> [??? 25.271] (==) ServerLayout "Layout-0"
> >> [??? 25.271] (**) |-->Screen "Screen-0" (0)
> >> [??? 25.271] (**) |?? |-->Monitor "Monitor-0"
> >> [??? 25.273] (**) |?? |-->Device "Device-0"
> >> [??? 25.274] (==) Automatically adding devices
> >> [??? 25.274] (==) Automatically enabling devices
> >> [??? 25.274] (==) Automatically adding GPU devices
> >> [??? 25.274] (==) Automatically binding GPU devices
> >> [??? 25.274] (==) Max clients allowed: 256, resource mask: 0x1fffff
> >> [??? 25.279] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
> >> exist.
> >> [??? 25.279] ??? Entry deleted from font path.
> >> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not
> >> exist.
> >> [??? 25.280] ??? Entry deleted from font path.
> >> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not
> >> exist.
> >> [??? 25.280] ??? Entry deleted from font path.
> >> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/100dpi" does not
> >> exist.
> >> [??? 25.281] ??? Entry deleted from font path.
> >> [??? 25.281] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
> >> [??? 25.281] ??? Entry deleted from font path.
> >> [??? 25.281] (==) FontPath set to:
> >> ??? /usr/share/fonts/X11/misc,
> >> ??? /usr/share/fonts/X11/Type1,
> >> ??? built-ins
> >> [??? 25.281] (==) ModulePath set to "/usr/lib/xorg/modules"
> >> [??? 25.281] (**) Extension "Composite" is enabled
> >> [??? 25.281] (II) The server relies on udev to provide the list of input
> >> devices.
> >> ??? If no devices become available, reconfigure udev or disable
> >> AutoAddDevices.
> >> [??? 25.281] (II) Loader magic: 0x558a187a3020
> >> [??? 25.281] (II) Module ABI versions:
> >> [??? 25.281] ??? X.Org ANSI C Emulation: 0.4
> >> [??? 25.281] ??? X.Org Video Driver: 24.1
> >> [??? 25.281] ??? X.Org XInput driver : 24.1
> >> [??? 25.281] ??? X.Org Server Extension : 10.0
> >> [??? 25.284] (++) using VT number 7
> >>
> >> [??? 25.285] (II) systemd-logind: logind integration requires -keeptty
> >> and -keeptty was not provided, disabling logind integration
> >> [??? 25.321] (--) PCI:*(0 at 0:1:0) 1106:7122:6d86:62cc rev 0, Mem @
> >> 0xf9000000/16777216, 0xf8000000/16777216, 0xd0000000/268435456, BIOS @
> >> 0x????????/131072
> >> [??? 25.322] (II) LoadModule: "glx"
> >> [??? 25.328] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> >> [??? 25.364] (II) Module glx: vendor="X.Org Foundation"
> >> [??? 25.364] ??? compiled for 1.20.8, module version = 1.0.0
> >> [??? 25.364] ??? ABI class: X.Org Server Extension, version 10.0
> >> [??? 25.364] (II) LoadModule: "openchrome"
> >> [??? 25.367] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
> >> [??? 25.376] (II) Module openchrome:
> >> vendor="https://www.freedesktop.org/wiki/Openchrome/"
> >> [??? 25.376] ??? compiled for 1.20.0, module version = 0.6.0
> >> [??? 25.376] ??? Module class: X.Org Video Driver
> >> [??? 25.376] ??? ABI class: X.Org Video Driver, version 24.0
> >> [??? 25.376] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
> >> ??? KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
> >> ??? PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
> >> ??? CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
> >> ??? P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
> >> [??? 25.378] (!!) VIA Technologies does not support this driver in any way.
> >> [??? 25.378] (!!) For support, please refer to
> >> https://www.freedesktop.org/wiki/Openchrome/.
> >> [??? 25.378] (!!) (openchrome 0.6.0 release)
> >> [??? 25.378] (II) CHROME(0): viaPreInit
> >> [??? 25.378] (II) CHROME(0): VIAGetRec
> >> [??? 25.378] (--) CHROME(0): Chipset: VX900
> >> [??? 25.384] (--) CHROME(0): Chipset revision: 0
> >> [??? 25.575] (EE) CHROME(0): [drm] Failed to open DRM device for
> >> pci:0000:00:01.0: No such file or directory
> >> [??? 25.576] (II) Loading sub module "vgahw"
> >> [??? 25.576] (II) LoadModule: "vgahw"
> >> [??? 25.577] (II) Loading /usr/lib/xorg/modules/libvgahw.so
> >> [??? 25.578] (II) Module vgahw: vendor="X.Org Foundation"
> >> [??? 25.578] ??? compiled for 1.20.8, module version = 0.1.0
> >> [??? 25.579] ??? ABI class: X.Org Video Driver, version 24.1
> >> [??? 25.579] (--) CHROME(0): Probed amount of VideoRAM = 262144 kB
> >> [??? 25.579] (II) CHROME(0): Entered viaMapMMIO.
> >> [??? 25.579] (--) CHROME(0): Mapping MMIO at address 0xF8000000 with
> >> size 52 KB.
> >> [??? 25.579] (--) CHROME(0): Mapping 2D Host BitBLT space at address
> >> 0xF8200000 with size 2048 KB.
> >> [??? 25.579] (--) CHROME(0): Mapping the frame buffer at address
> >> 0xD0000000 with size 262144 KB.
> >> [??? 25.586] (--) CHROME(0): Frame buffer start address: 0x7f49ef542000,
> >> free start: 0x0 end: 0x10000000
> >> [??? 25.586] (II) CHROME(0): Entered viaMMIOEnable.
> >> [??? 25.587] (II) CHROME(0): Exiting viaMMIOEnable.
> >> [??? 25.587] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
> >> [??? 25.587] (II) CHROME(0): Exiting viaMapMMIO.
> >> [??? 25.587] (**) CHROME(0): Depth 32, (--) framebuffer bpp 32
> >> [??? 25.587] (==) CHROME(0): RGB weight 888
> >> [??? 25.587] (==) CHROME(0): Default visual is TrueColor
> >> [??? 25.587] (II) CHROME(0): VIASetupDefaultOptions - Setting up default
> >> chipset options.
> >> [??? 25.587] (**) CHROME(0): Option "ExaScratchSize" "8192"
> >> [??? 25.587] (**) CHROME(0): Option "MaxDRIMem" "16384"
> >> [??? 25.587] (==) CHROME(0): Shadow framebuffer is disabled.
> >> [??? 25.587] (==) CHROME(0): Hardware acceleration is enabled.
> >> [??? 25.587] (==) CHROME(0): Using EXA acceleration architecture.
> >> [??? 25.588] (==) CHROME(0): EXA composite acceleration enabled.
> >> [??? 25.591] (**) CHROME(0): EXA scratch area size is 8192 kB.
> >> [??? 25.591] (==) CHROME(0): Using hardware two-color cursors and
> >> software full-color cursors.
> >> [??? 25.591] (==) CHROME(0): GPU virtual command queue will be enabled.
> >> [??? 25.592] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
> >> [??? 25.592] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled.
> >> [??? 25.592] (==) CHROME(0): PCI DMA will not be used for XV image
> >> transfer if DRI is enabled.
> >> [??? 25.592] (==) CHROME(0): Xv Bandwidth check is enabled.
> >> [??? 25.592] (**) CHROME(0): Will impose a 16384 kB limit on video RAM
> >> reserved for DRI.
> >> [??? 25.592] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
> >> [??? 25.592] (==) CHROME(0): TV dotCrawl is disabled.
> >> [??? 25.592] (==) CHROME(0): TV deflicker is set to 0.
> >> [??? 25.592] (==) CHROME(0): No default TV type is set.
> >> [??? 25.592] (==) CHROME(0): No default TV output signal type is set.
> >> [??? 25.592] (==) CHROME(0): Will not print VGA registers.
> >> [??? 25.592] (==) CHROME(0): Will not scan I2C buses.
> >> [??? 25.592] (II) CHROME(0): Detected MemClk 10
> >> [??? 25.592] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 10
> >> [??? 25.592] (II) CHROME(0): Detected TV standard: NTSC.
> >> [??? 25.592] (II) Loading sub module "ramdac"
> >> [??? 25.593] (II) LoadModule: "ramdac"
> >> [??? 25.593] (II) Module "ramdac" already built-in
> >> [??? 25.593] (II) Loading sub module "i2c"
> >> [??? 25.593] (II) LoadModule: "i2c"
> >> [??? 25.593] (II) Module "i2c" already built-in
> >> [??? 25.593] (II) CHROME(0): Entered ViaI2CInit.
> >> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus1Init.
> >> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 1" initialized.
> >> [??? 25.593] (II) CHROME(0): Exiting ViaI2CBus1Init.
> >> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus2Init.
> >> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 2" initialized.
> >> [??? 25.593] (II) CHROME(0): Exiting ViaI2CBus2Init.
> >> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus3Init.
> >> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 3" initialized.
> >> [??? 25.594] (II) CHROME(0): Exiting ViaI2CBus3Init.
> >> [??? 25.594] (II) CHROME(0): Exiting ViaI2CInit.
> >> [??? 25.594] (II) Loading sub module "ddc"
> >> [??? 25.594] (II) LoadModule: "ddc"
> >> [??? 25.594] (II) Module "ddc" already built-in
> >> [??? 25.594] (II) CHROME(0): Entered viaOutputDetect.
> >> [??? 25.594] (II) CHROME(0): Entered viaProbePinStrapping.
> >> [??? 25.594] (II) CHROME(0): Probing VIA Technologies IGP pin strapping
> >> . . .
> >> [??? 25.594] (II) CHROME(0): SR5A: 0x00
> >> [??? 25.594] (II) CHROME(0): Setting 3C5.5A[0] to 0.
> >> [??? 25.594] (II) CHROME(0): SR12: 0x00
> >> [??? 25.594] (II) CHROME(0): SR13: 0x00
> >> [??? 25.594] (II) CHROME(0): Setting 3C5.5A[0] to 1.
> >> [??? 25.594] (II) CHROME(0): SR12: 0x00
> >> [??? 25.594] (II) CHROME(0): SR13: 0x00
> >> [??? 25.595] (II) CHROME(0): LVDS1 + LVDS2 detected.
> >> [??? 25.595] (II) CHROME(0): Exiting viaProbePinStrapping.
> >> [??? 25.595] (II) CHROME(0): Entered via_analog_init.
> >> [??? 25.595] (II) CHROME(0): Output VGA-1 using monitor section Monitor-0
> >> [??? 25.595] (**) CHROME(0): Option "PreferredMode" "1280x1024"
> >> [??? 25.595] (II) CHROME(0): Exiting via_analog_init.
> >> [??? 25.595] (II) CHROME(0): Entered via_tv_init.
> >> [??? 25.597] (--) CHROME(0): Did not detect a TV encoder.
> >> [??? 25.599] (II) CHROME(0): Exiting via_tv_init.
> >> [??? 25.599] (II) CHROME(0): Entered via_dvi_init.
> >> [??? 25.599] (II) CHROME(0): Entered viaTMDSInit.
> >> [??? 25.599] (II) CHROME(0): SR13: 0x00
> >> [??? 25.599] (II) CHROME(0): Integrated TMDS transmitter not found.
> >> [??? 25.599] (II) CHROME(0): Exiting viaTMDSInit.
> >> [??? 25.599] (II) CHROME(0): Integrated TMDS transmitter for DVI not found.
> >> [??? 25.599] (II) CHROME(0): Probing I2C Bus 2 for VT1632.
> >> [??? 25.599] (II) CHROME(0): Entered viaVT1632Init.
> >> [??? 25.600] (--) CHROME(0): I2C device not found.
> >> [??? 25.600] (II) CHROME(0): Exiting viaVT1632Init.
> >> [??? 25.600] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
> >> [??? 25.600] (II) CHROME(0): Probing I2C Bus 3 for VT1632.
> >> [??? 25.600] (II) CHROME(0): Entered viaVT1632Init.
> >> [??? 25.601] (--) CHROME(0): I2C device not found.
> >> [??? 25.601] (II) CHROME(0): Exiting viaVT1632Init.
> >> [??? 25.601] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
> >> [??? 25.601] (II) CHROME(0): Probing I2C Bus 2 for SiI 164.
> >> [??? 25.601] (II) CHROME(0): Entered viaSiI164Init.
> >> [??? 25.602] (--) CHROME(0): I2C device not found.
> >> [??? 25.602] (II) CHROME(0): Exiting viaSiI164Init.
> >> [??? 25.602] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
> >> [??? 25.602] (II) CHROME(0): Probing I2C Bus 3 for SiI 164.
> >> [??? 25.602] (II) CHROME(0): Entered viaSiI164Init.
> >> [??? 25.603] (--) CHROME(0): I2C device not found.
> >> [??? 25.603] (II) CHROME(0): Exiting viaSiI164Init.
> >> [??? 25.603] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
> >> [??? 25.603] (II) CHROME(0): Exiting via_dvi_init.
> >> [??? 25.603] (II) CHROME(0): Exiting viaOutputDetect.
> >> [??? 25.603] (**) CHROME(0): Option "ModeDebug" "true"
> >> [??? 25.603] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
> >> [??? 25.603] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at
> >> address 0xA0.
> >> [??? 25.624] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
> >> [??? 25.624] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
> >> [??? 25.624] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at
> >> address 0xA0.
> >> [??? 25.628] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
> >> [??? 25.628] (--) CHROME(0): Now perform manual detection of a VGA monitor.
> >> [??? 25.631] (II) CHROME(0): EDID for output VGA-1
> >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
> >> [??? 25.631] (WW) CHROME(0): No outputs definitely connected, trying
> >> again...
> >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected
> >> [??? 25.631] (WW) CHROME(0): Unable to find connected outputs - setting
> >> 1024x768 initial framebuffer
> >> [??? 25.631] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
> >> [??? 25.631] (==) CHROME(0): DPI set to (96, 96)
> >> [??? 25.631] (II) Loading sub module "fb"
> >> [??? 25.631] (II) LoadModule: "fb"
> >> [??? 25.632] (II) Loading /usr/lib/xorg/modules/libfb.so
> >> [??? 25.638] (II) Module fb: vendor="X.Org Foundation"
> >> [??? 25.638] ??? compiled for 1.20.8, module version = 1.0.0
> >> [??? 25.638] ??? ABI class: X.Org ANSI C Emulation, version 0.4
> >> [??? 25.638] (II) Loading sub module "exa"
> >> [??? 25.638] (II) LoadModule: "exa"
> >> [??? 25.639] (II) Loading /usr/lib/xorg/modules/libexa.so
> >> [??? 25.641] (II) Module exa: vendor="X.Org Foundation"
> >> [??? 25.642] ??? compiled for 1.20.8, module version = 2.6.0
> >> [??? 25.642] ??? ABI class: X.Org Video Driver, version 24.1
> >> [??? 25.642] (II) CHROME(0): VIAScreenInit
> >> [??? 25.642] (II) CHROME(0): Frame Buffer From (0,0) To (1920,32767)
> >> [??? 25.642] (II) CHROME(0): Using 31687 lines for offscreen memory.
> >> [??? 25.642] 8294400 bytes of Linear memory allocated at f000000, handle
> >> 94051632263088
> >> [??? 25.642] (II) CHROME(0): Entered umsAccelInit.
> >> [??? 25.642] 262144 bytes of Linear memory allocated at f7e9000, handle
> >> 94051632276352
> >> [??? 25.642] (II) CHROME(0): Initializing the 2D engine.
> >> [??? 25.642] (II) CHROME(0): Initializing the 3D engine.
> >> [??? 25.643] 32 bytes of Linear memory allocated at f829000, handle
> >> 94051632276496
> >> [??? 25.643] 32 bytes of Linear memory allocated at f829080, handle
> >> 94051632276784
> >> [??? 25.643] (II) CHROME(0): Exiting umsAccelInit.
> >> [??? 25.644] (II) CHROME(0): - Visuals set up
> >> [??? 25.645] (II) CHROME(0): - B & W
> >> [??? 25.647] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
> >> [??? 25.647] (II) EXA(0): Offscreen pixmap area of 260141056 bytes
> >> [??? 25.647] (II) EXA(0): Driver registered support for the following
> >> operations:
> >> [??? 25.647] (II)???????? Solid
> >> [??? 25.647] (II)???????? Copy
> >> [??? 25.647] (II)???????? Composite (RENDER acceleration)
> >> [??? 25.647] (II) CHROME(0): [EXA] Enabled EXA acceleration.
> >> [??? 25.647] (==) CHROME(0): Backing store enabled
> >> [??? 25.647] (II) CHROME(0): - Backing store set up
> >> [??? 25.649] (II) CHROME(0): - SW cursor set up
> >> [??? 25.649] (II) CHROME(0): HWCursor ARGB enabled
> >> [??? 25.649] 16384 bytes of Linear memory allocated at f829100, handle
> >> 94051632300352
> >> [??? 25.649] 16384 bytes of Linear memory allocated at f82d100, handle
> >> 94051632300432
> >> [??? 25.650] (II) CHROME(0): - Def Color map set up
> >> [??? 25.651] (II) CHROME(0): - Palette loaded
> >> [??? 25.651] (II) CHROME(0): - Color maps etc. set up
> >> [??? 25.651] (**) CHROME(0): DPMS enabled
> >> [??? 25.651] (II) CHROME(0): - DPMS set up
> >> [??? 25.651] (II) CHROME(0): VIAEnterVT
> >> [??? 25.651] (II) CHROME(0): Entered viaIGA1Save.
> >> [??? 25.652] (II) CHROME(0): Saving sequencer registers.
> >> [??? 25.652] (II) CHROME(0): Finished saving sequencer registers.
> >> [??? 25.652] (II) CHROME(0): Saving IGA1 registers.
> >> [??? 25.652] (II) CHROME(0): Finished saving IGA1 registers.
> >> [??? 25.652] (II) CHROME(0): Exiting viaIGA1Save.
> >> [??? 25.652] (II) CHROME(0): Entered iga2_crtc_save.
> >> [??? 25.652] (II) CHROME(0): Entered viaIGA2Save.
> >> [??? 25.652] (II) CHROME(0): Saving IGA2 registers.
> >> [??? 25.652] (II) CHROME(0): Finished saving IGA2 registers.
> >> [??? 25.652] (II) CHROME(0): Exiting viaIGA2Save.
> >> [??? 25.652] (II) CHROME(0): Exiting iga2_crtc_save.
> >> [??? 25.652] (II) CHROME(0): Entered via_analog_dpms.
> >> [??? 25.652] (II) CHROME(0): Entered viaAnalogOutput.
> >> [??? 25.653] (II) CHROME(0): Analog VGA Output: Off
> >> [??? 25.653] (II) CHROME(0): Exiting viaAnalogOutput.
> >> [??? 25.653] (II) CHROME(0): Exiting via_analog_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered iga1_crtc_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered viaIGA1DPMSControl.
> >> [??? 25.653] (II) CHROME(0): Exiting viaIGA1DPMSControl.
> >> [??? 25.653] (II) CHROME(0): Exiting iga1_crtc_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered iga2_crtc_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered viaIGA2DisplayOutput.
> >> [??? 25.653] (II) CHROME(0): IGA2 Display Output: Off
> >> [??? 25.653] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
> >> [??? 25.653] (II) CHROME(0): Exiting iga2_crtc_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered via_analog_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered viaAnalogOutput.
> >> [??? 25.653] (II) CHROME(0): Analog VGA Output: Off
> >> [??? 25.653] (II) CHROME(0): Exiting viaAnalogOutput.
> >> [??? 25.653] (II) CHROME(0): Exiting via_analog_dpms.
> >> [??? 25.653] (II) CHROME(0): Entered iga1_crtc_dpms.
> >> [??? 25.654] (II) CHROME(0): Entered viaIGA1DPMSControl.
> >> [??? 25.654] (II) CHROME(0): Exiting viaIGA1DPMSControl.
> >> [??? 25.654] (II) CHROME(0): Exiting iga1_crtc_dpms.
> >> [??? 25.654] (II) CHROME(0): Entered iga2_crtc_dpms.
> >> [??? 25.654] (II) CHROME(0): Entered viaIGA2DisplayOutput.
> >> [??? 25.654] (II) CHROME(0): IGA2 Display Output: Off
> >> [??? 25.654] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
> >> [??? 25.654] (II) CHROME(0): Exiting iga2_crtc_dpms.
> >> [??? 25.654] DRM memory allocation failed -6
> >> [??? 25.654] (II) CHROME(0): Using default xfree86 memcpy for video.
> >> [??? 25.654] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
> >> [??? 25.654] (WW) CHROME(0): Option "ActiveDevice" is not used
> >> [??? 25.654] (WW) CHROME(0): Option "PreferredMode" is not used
> >> [??? 25.655] (II) CHROME(0): - Done
> >> [??? 25.655] (II) Initializing extension Generic Event Extension
> >> [??? 25.655] (II) Initializing extension SHAPE
> >> [??? 25.656] (II) Initializing extension MIT-SHM
> >> [??? 25.657] (II) Initializing extension XInputExtension
> >> [??? 25.660] (II) Initializing extension XTEST
> >> [??? 25.661] (II) Initializing extension BIG-REQUESTS
> >> [??? 25.661] (II) Initializing extension SYNC
> >> [??? 25.662] (II) Initializing extension XKEYBOARD
> >> [??? 25.663] (II) Initializing extension XC-MISC
> >> [??? 25.663] (II) Initializing extension SECURITY
> >> [??? 25.664] (II) Initializing extension XFIXES
> >> [??? 25.665] (II) Initializing extension RENDER
> >> [??? 25.665] (II) Initializing extension RANDR
> >> [??? 25.666] (II) Initializing extension COMPOSITE
> >> [??? 25.667] (II) Initializing extension DAMAGE
> >> [??? 25.671] (II) Initializing extension MIT-SCREEN-SAVER
> >> [??? 25.672] (II) Initializing extension DOUBLE-BUFFER
> >> [??? 25.673] (II) Initializing extension RECORD
> >> [??? 25.673] (II) Initializing extension DPMS
> >> [??? 25.674] (II) Initializing extension Present
> >> [??? 25.674] (II) Initializing extension DRI3
> >> [??? 25.675] (II) Initializing extension X-Resource
> >> [??? 25.675] (II) Initializing extension XVideo
> >> [??? 25.676] (II) Initializing extension XVideo-MotionCompensation
> >> [??? 25.676] (II) Initializing extension SELinux
> >> [??? 25.676] (II) SELinux: Disabled on system
> >> [??? 25.676] (II) Initializing extension GLX
> >> [??? 25.677] (II) AIGLX: Screen 0 is not DRI2 capable
> >> [??? 26.147] (II) IGLX: Loaded and initialized swrast
> >> [??? 26.149] (II) GLX: Initialized DRISWRAST GL provider for screen 0
> >> [??? 26.149] (II) Initializing extension XFree86-VidModeExtension
> >> [??? 26.150] (II) Initializing extension XFree86-DGA
> >> [??? 26.151] (II) Initializing extension XFree86-DRI
> >> [??? 26.152] (II) Initializing extension DRI2
> >> [??? 26.542] (II) config/udev: Adding input device Power Button
> >> (/dev/input/event2)
> >> [??? 26.543] (**) Power Button: Applying InputClass "libinput keyboard
> >> catchall"
> >> [??? 26.543] (II) LoadModule: "libinput"
> >> [??? 26.545] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
> >> [??? 26.561] (II) Module libinput: vendor="X.Org Foundation"
> >> [??? 26.561] ??? compiled for 1.20.4, module version = 0.29.0
> >> [??? 26.561] ??? Module class: X.Org XInput Driver
> >> [??? 26.561] ??? ABI class: X.Org XInput driver, version 24.1
> >> [??? 26.561] (II) Using input driver 'libinput' for 'Power Button'
> >> [??? 26.561] (**) Power Button: always reports core events
> >> [??? 26.561] (**) Option "Device" "/dev/input/event2"
> >> [??? 26.561] (**) Option "_source" "server/udev"
> >> [??? 26.582] (II) event2? - Power Button: is tagged by udev as: Keyboard
> >> [??? 26.583] (II) event2? - Power Button: device is a keyboard
> >> [??? 26.583] (II) event2? - Power Button: device removed
> >> [??? 26.600] (**) Option "config_info"
> >> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
> >> [??? 26.600] (II) XINPUT: Adding extended input device "Power Button"
> >> (type: KEYBOARD, id 6)
> >> [??? 26.600] (**) Option "xkb_model" "pc105"
> >> [??? 26.600] (**) Option "xkb_layout" "de"
> >> [??? 26.739] (II) event2? - Power Button: is tagged by udev as: Keyboard
> >> [??? 26.740] (II) event2? - Power Button: device is a keyboard
> >> [??? 26.744] (II) config/udev: Adding input device Video Bus
> >> (/dev/input/event3)
> >> [??? 26.745] (**) Video Bus: Applying InputClass "libinput keyboard
> >> catchall"
> >> [??? 26.745] (II) Using input driver 'libinput' for 'Video Bus'
> >> [??? 26.745] (**) Video Bus: always reports core events
> >> [??? 26.745] (**) Option "Device" "/dev/input/event3"
> >> [??? 26.745] (**) Option "_source" "server/udev"
> >> [??? 26.752] (II) event3? - Video Bus: is tagged by udev as: Keyboard
> >> [??? 26.752] (II) event3? - Video Bus: device is a keyboard
> >> [??? 26.753] (II) event3? - Video Bus: device removed
> >> [??? 26.776] (**) Option "config_info"
> >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event3"
> >> [??? 26.776] (II) XINPUT: Adding extended input device "Video Bus"
> >> (type: KEYBOARD, id 7)
> >> [??? 26.776] (**) Option "xkb_model" "pc105"
> >> [??? 26.776] (**) Option "xkb_layout" "de"
> >> [??? 26.784] (II) event3? - Video Bus: is tagged by udev as: Keyboard
> >> [??? 26.784] (II) event3? - Video Bus: device is a keyboard
> >> [??? 26.788] (II) config/udev: Adding input device Power Button
> >> (/dev/input/event1)
> >> [??? 26.788] (**) Power Button: Applying InputClass "libinput keyboard
> >> catchall"
> >> [??? 26.789] (II) Using input driver 'libinput' for 'Power Button'
> >> [??? 26.789] (**) Power Button: always reports core events
> >> [??? 26.789] (**) Option "Device" "/dev/input/event1"
> >> [??? 26.789] (**) Option "_source" "server/udev"
> >> [??? 26.795] (II) event1? - Power Button: is tagged by udev as: Keyboard
> >> [??? 26.795] (II) event1? - Power Button: device is a keyboard
> >> [??? 26.796] (II) event1? - Power Button: device removed
> >> [??? 26.812] (**) Option "config_info"
> >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
> >> [??? 26.812] (II) XINPUT: Adding extended input device "Power Button"
> >> (type: KEYBOARD, id 8)
> >> [??? 26.812] (**) Option "xkb_model" "pc105"
> >> [??? 26.812] (**) Option "xkb_layout" "de"
> >> [??? 26.819] (II) event1? - Power Button: is tagged by udev as: Keyboard
> >> [??? 26.820] (II) event1? - Power Button: device is a keyboard
> >> [??? 26.824] (II) config/udev: Adding input device Sleep Button
> >> (/dev/input/event0)
> >> [??? 26.824] (**) Sleep Button: Applying InputClass "libinput keyboard
> >> catchall"
> >> [??? 26.824] (II) Using input driver 'libinput' for 'Sleep Button'
> >> [??? 26.824] (**) Sleep Button: always reports core events
> >> [??? 26.824] (**) Option "Device" "/dev/input/event0"
> >> [??? 26.824] (**) Option "_source" "server/udev"
> >> [??? 26.830] (II) event0? - Sleep Button: is tagged by udev as: Keyboard
> >> [??? 26.831] (II) event0? - Sleep Button: device is a keyboard
> >> [??? 26.831] (II) event0? - Sleep Button: device removed
> >> [??? 26.836] (**) Option "config_info"
> >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
> >> [??? 26.836] (II) XINPUT: Adding extended input device "Sleep Button"
> >> (type: KEYBOARD, id 9)
> >> [??? 26.836] (**) Option "xkb_model" "pc105"
> >> [??? 26.837] (**) Option "xkb_layout" "de"
> >> [??? 26.844] (II) event0? - Sleep Button: is tagged by udev as: Keyboard
> >> [??? 26.844] (II) event0? - Sleep Button: device is a keyboard
> >> [??? 26.847] (II) config/udev: Adding input device HD-Audio Generic
> >> HDMI/DP,pcm=3 (/dev/input/event8)
> >> [??? 26.848] (II) No input driver specified, ignoring this device.
> >> [??? 26.848] (II) This device may have been added with another device file.
> >> [??? 26.855] (II) config/udev: Adding input device Logitech USB Optical
> >> Mouse (/dev/input/event4)
> >> [??? 26.855] (**) Logitech USB Optical Mouse: Applying InputClass
> >> "libinput pointer catchall"
> >> [??? 26.855] (II) Using input driver 'libinput' for 'Logitech USB
> >> Optical Mouse'
> >> [??? 26.855] (**) Logitech USB Optical Mouse: always reports core events
> >> [??? 26.855] (**) Option "Device" "/dev/input/event4"
> >> [??? 26.855] (**) Option "_source" "server/udev"
> >> [??? 26.865] (II) event4? - Logitech USB Optical Mouse: is tagged by
> >> udev as: Mouse
> >> [??? 26.865] (II) event4? - Logitech USB Optical Mouse: device is a pointer
> >> [??? 26.866] (II) event4? - Logitech USB Optical Mouse: device removed
> >> [??? 26.900] (**) Option "config_info"
> >> "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C077.0001/input/input7/event4"
> >> [??? 26.900] (II) XINPUT: Adding extended input device "Logitech USB
> >> Optical Mouse" (type: MOUSE, id 10)
> >> [??? 26.901] (**) Option "AccelerationScheme" "none"
> >> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
> >> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) acceleration
> >> factor: 2.000
> >> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) acceleration
> >> threshold: 4
> >> [??? 26.911] (II) event4? - Logitech USB Optical Mouse: is tagged by
> >> udev as: Mouse
> >> [??? 26.912] (II) event4? - Logitech USB Optical Mouse: device is a pointer
> >> [??? 26.917] (II) config/udev: Adding input device Logitech USB Optical
> >> Mouse (/dev/input/mouse0)
> >> [??? 26.917] (II) No input driver specified, ignoring this device.
> >> [??? 26.917] (II) This device may have been added with another device file.
> >> [??? 26.922] (II) config/udev: Adding input device Chicony HP Elite USB
> >> Keyboard (/dev/input/event5)
> >> [??? 26.922] (**) Chicony HP Elite USB Keyboard: Applying InputClass
> >> "libinput keyboard catchall"
> >> [??? 26.922] (II) Using input driver 'libinput' for 'Chicony HP Elite
> >> USB Keyboard'
> >> [??? 26.923] (**) Chicony HP Elite USB Keyboard: always reports core events
> >> [??? 26.923] (**) Option "Device" "/dev/input/event5"
> >> [??? 26.923] (**) Option "_source" "server/udev"
> >> [??? 26.933] (II) event5? - Chicony HP Elite USB Keyboard: is tagged by
> >> udev as: Keyboard
> >> [??? 26.934] (II) event5? - Chicony HP Elite USB Keyboard: device is a
> >> keyboard
> >> [??? 26.935] (II) event5? - Chicony HP Elite USB Keyboard: device removed
> >> [??? 26.944] (**) Option "config_info"
> >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/0003:03F0:034A.0002/input/input8/event5"
> >> [??? 26.944] (II) XINPUT: Adding extended input device "Chicony HP Elite
> >> USB Keyboard" (type: KEYBOARD, id 11)
> >> [??? 26.944] (**) Option "xkb_model" "pc105"
> >> [??? 26.945] (**) Option "xkb_layout" "de"
> >> [??? 26.956] (II) event5? - Chicony HP Elite USB Keyboard: is tagged by
> >> udev as: Keyboard
> >> [??? 26.957] (II) event5? - Chicony HP Elite USB Keyboard: device is a
> >> keyboard
> >> [??? 26.964] (II) config/udev: Adding input device Chicony HP Elite USB
> >> Keyboard Consumer Control (/dev/input/event7)
> >> [??? 26.964] (**) Chicony HP Elite USB Keyboard Consumer Control:
> >> Applying InputClass "libinput keyboard catchall"
> >> [??? 26.964] (II) Using input driver 'libinput' for 'Chicony HP Elite
> >> USB Keyboard Consumer Control'
> >> [??? 26.964] (**) Chicony HP Elite USB Keyboard Consumer Control: always
> >> reports core events
> >> [??? 26.964] (**) Option "Device" "/dev/input/event7"
> >> [??? 26.964] (**) Option "_source" "server/udev"
> >> [??? 26.975] (II) event7? - Chicony HP Elite USB Keyboard Consumer
> >> Control: is tagged by udev as: Keyboard
> >> [??? 26.976] (II) event7? - Chicony HP Elite USB Keyboard Consumer
> >> Control: device is a keyboard
> >> [??? 26.977] (II) event7? - Chicony HP Elite USB Keyboard Consumer
> >> Control: device removed
> >> [??? 26.996] (II) libinput: Chicony HP Elite USB Keyboard Consumer
> >> Control: needs a virtual subdevice
> >> [??? 26.996] (**) Option "config_info"
> >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input10/event7"
> >> [??? 26.996] (II) XINPUT: Adding extended input device "Chicony HP Elite
> >> USB Keyboard Consumer Control" (type: MOUSE, id 12)
> >> [??? 26.997] (**) Option "AccelerationScheme" "none"
> >> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control:
> >> (accel) selected scheme none/0
> >> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control:
> >> (accel) acceleration factor: 2.000
> >> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control:
> >> (accel) acceleration threshold: 4
> >> [??? 27.008] (II) event7? - Chicony HP Elite USB Keyboard Consumer
> >> Control: is tagged by udev as: Keyboard
> >> [??? 27.008] (II) event7? - Chicony HP Elite USB Keyboard Consumer
> >> Control: device is a keyboard
> >> [??? 27.015] (II) config/udev: Adding input device Chicony HP Elite USB
> >> Keyboard System Control (/dev/input/event6)
> >> [??? 27.015] (**) Chicony HP Elite USB Keyboard System Control: Applying
> >> InputClass "libinput keyboard catchall"
> >> [??? 27.015] (II) Using input driver 'libinput' for 'Chicony HP Elite
> >> USB Keyboard System Control'
> >> [??? 27.015] (**) Chicony HP Elite USB Keyboard System Control: always
> >> reports core events
> >> [??? 27.015] (**) Option "Device" "/dev/input/event6"
> >> [??? 27.015] (**) Option "_source" "server/udev"
> >> [??? 27.026] (II) event6? - Chicony HP Elite USB Keyboard System
> >> Control: is tagged by udev as: Keyboard
> >> [??? 27.026] (II) event6? - Chicony HP Elite USB Keyboard System
> >> Control: device is a keyboard
> >> [??? 27.028] (II) event6? - Chicony HP Elite USB Keyboard System
> >> Control: device removed
> >> [??? 27.044] (**) Option "config_info"
> >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input9/event6"
> >> [??? 27.044] (II) XINPUT: Adding extended input device "Chicony HP Elite
> >> USB Keyboard System Control" (type: KEYBOARD, id 13)
> >> [??? 27.044] (**) Option "xkb_model" "pc105"
> >> [??? 27.044] (**) Option "xkb_layout" "de"
> >> [??? 27.056] (II) event6? - Chicony HP Elite USB Keyboard System
> >> Control: is tagged by udev as: Keyboard
> >> [??? 27.056] (II) event6? - Chicony HP Elite USB Keyboard System
> >> Control: device is a keyboard
> >> [??? 27.110] (**) Chicony HP Elite USB Keyboard Consumer Control:
> >> Applying InputClass "libinput keyboard catchall"
> >> [??? 27.111] (II) Using input driver 'libinput' for 'Chicony HP Elite
> >> USB Keyboard Consumer Control'
> >> [??? 27.111] (**) Chicony HP Elite USB Keyboard Consumer Control: always
> >> reports core events
> >> [??? 27.111] (**) Option "Device" "/dev/input/event7"
> >> [??? 27.111] (**) Option "_source" "_driver/libinput"
> >> [??? 27.111] (II) libinput: Chicony HP Elite USB Keyboard Consumer
> >> Control: is a virtual subdevice
> >> [??? 27.111] (**) Option "config_info"
> >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input10/event7"
> >> [??? 27.111] (II) XINPUT: Adding extended input device "Chicony HP Elite
> >> USB Keyboard Consumer Control" (type: KEYBOARD, id 14)
> >> [??? 27.111] (**) Option "xkb_model" "pc105"
> >> [??? 27.112] (**) Option "xkb_layout" "de"
> >>
> >>
> >>
> >
> >
>