[pulseaudio-tickets] [PulseAudio] #893: Stream Audio over bluetooth and hear it on my computers speakers
PulseAudio
trac-noreply at tango.0pointer.de
Tue Jan 11 17:34:34 PST 2011
#893: Stream Audio over bluetooth and hear it on my computers speakers
------------------------+---------------------------------------------------
Reporter: mroussin51 | Owner: lennart
Type: defect | Status: new
Milestone: | Component: daemon
Keywords: |
------------------------+---------------------------------------------------
I have been able to stream the audio over bluetooth from my droid x into
Ubuntu 64 bit and even record it and play it back but I can not play it on
my speeakers. I have been trying to source and sink in pacmd shell but
can't make it work. Please explain how to do this.
Here are my sources and sinks:
>>> user at mike:~$ pacmd
Welcome to PulseAudio! Use "help" for usage information.
>>> list-sources
3 source(s) available.
* index: 0
name: <alsa_input.usb-046d_09a4_36C49D50-02-U0x46d0x9a4.analog-
mono>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: 0: 63%
0: -12.00 dB
balance 0.00
base volume: 26%
-35.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 1ch 16000Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.usb-046d_09a4_36C49D50-02-U0x46d0x9a4>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "USB Device 0x46d:0x9a4"
alsa.long_card_name = "USB Device 0x46d:0x9a4 at
usb-0000:00:1a.7-4, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.7-usb-0:4:1.2"
sysfs.path =
"/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.2/sound/card1"
udev.id = "usb-046d_09a4_36C49D50-02-U0x46d0x9a4"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "09a4"
device.product.name = "QuickCam E 3500"
device.serial = "046d_09a4_36C49D50"
device.form_factor = "webcam"
device.string = "hw:1"
device.buffering.buffer_size = "64000"
device.buffering.fragment_size = "32000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "QuickCam E 3500 Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:09a4"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
device.description = "Monitor of Internal Audio Analog
Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xe3220000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path =
"/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "82801JI (ICH10 Family) HD Audio
Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <bluez_source.BC_0D_A5_83_95_AE>
driver: <module-bluetooth-device.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 39.51 ms
card: 2 <bluez_card.BC_0D_A5_83_95_AE>
module: 7
properties:
bluetooth.protocol = "a2dp_source"
device.description = "MIKE'S DROIDX"
device.string = "BC:0D:A5:83:95:AE"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
bluez.path = "/org/bluez/1209/hci0/dev_BC_0D_A5_83_95_AE"
bluez.class = "0x5a020c"
bluez.name = "MIKE'S DROIDX"
device.icon_name = "audio-card-bluetooth"
>>> list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "STAC92xx Analog"
alsa.id = "STAC92xx Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xe3220000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path =
"/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "82801JI (ICH10 Family) HD Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "IDT 92HD73E1X5"
alsa.components = "HDA:111d7676,80865001,00100202"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900)
analog-output-speaker: Analog Speakers (priority 10000)
analog-output-headphones: Analog Headphones (priority
9000)
active port: <analog-output-speaker>
>>>
Thanks in advance,
Mike
--
Ticket URL: <http://pulseaudio.org/ticket/893>
PulseAudio <http://pulseaudio.org/>
The PulseAudio Sound Server
More information about the pulseaudio-bugs
mailing list