[pulseaudio-discuss] a2dpd stuttering and my experience thus far

[Jeff]

Brad Midgley wrote:
> Jeff
>
> You may have seen in the discussion with Jim that a2dpd is not being
> maintained. The audio service in bluez-utils is taking its place and
> works pretty well now.
>
> You can improve audio delivery in many cases with hcid.conf changes.
> If you have "master" in hcid.conf's lm setting and you take "rswitch"
> and "sniff" out of the lp setting, you are making the pc prefer to be
> master and to hopefully behave better. This can eliminate choppiness.
>
> The ideal setup would be to use pulse to switch from wired to wireless
> audio on the fly. I'm not sure it will work currently. I'll be trying
> again with pulse 0.9.7.
>
> Brad
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
>   

Brad,

Thanks for the reply... I will try that out later today.

Since the a2dpd supported input signals from the headset and considering 
the device has to be paired for the signals to be accepted, could you 
use the play button or bluemon to start up the connection?

Jeff