[pulseaudio-discuss] Help in setting up PA... SOLVED

Tue Jun 3 11:04:37 PDT 2008

ok, very thank, i will to try 

bye 


  ----- Original Message ----- 
  From: Richard Geddes 
  To: General PulseAudio Discussion 
  Sent: Tuesday, June 03, 2008 8:00 PM
  Subject: Re: [pulseaudio-discuss] Help in setting up PA... SOLVED


  #.ifexists module-hal-detect.so
  #load-module module-hal-detect
  #.else
  #load-module module-detect
  #.endif


  I forgot to mention, to see error/warning messages I used:

  grep pulse /var/log/messages

  there may be better ways, though

  Juan A Fuentes Bermudez wrote: 
    hi

    very thank , i will try this, only aquestion:
    to coment the autodetec module what is the corret?

    #.ifexists module-hal-detect.so
    #load-module module-hal-detect
    #.else
    #load-module module-detect
    #.endif


    or 

    .ifexists module-hal-detect.so
    #load-module module-hal-detect
    .else
    #load-module module-detect
    .endif


    very thank 


      ----- Original Message ----- 
      From: Richard Geddes 
      To: General PulseAudio Discussion 
      Sent: Tuesday, June 03, 2008 6:02 PM
      Subject: Re: [pulseaudio-discuss] Help in setting up PA... SOLVED


      Now as I understand it, when linux starts, 

      1) there is a program called hald (hardware abstraction layer daemon) that identifies the hardware attached to your computer.  In the output of aplay, each card is given an identifier...  "tarjeta {0 -3}"

      2) other programs like pa use the info hald provides to make decisions about how to use the hardware.

      In the case of tarjeta 2  - EWX2496  using the ice1712 driver (this same chip is in my tarjeta), apparently pulseaudio or hald did not identify it correctly, and when trying to connect to this tarjeta, pa realizes this and says no.

      The default global pa config file (/etc/pulse/default.pa) in ubuntu has these statements: 

      .ifexists module-hal-detect.so
      load-module module-hal-detect
      .else
      load-module module-detect
      .endif

      which is a means of auto-detecting the tarjetas on your system.  Let's change this:

      1) make a copy of your original global config file
          cd /etc/pulse/
          sudo cp default.pa default.pa.original

      2) comment out the lines that deal with auto detecting the tarjetas (the lines above)

      3) Add these lines in it's place:     sudo [vi,gedit,...] default.pa
      ------------
      # Load the devices:
      load-module module-alsa-sink sink_name=nvidia_out device=hw:0
      load-module module-alsa-source source_name=nvidia_in device=hw:0

      load-module module-alsa-sink sink_name=hdmi_out device=hw:1
      load-module module-alsa-source source_name=hdmi_in device=hw:1

      load-module module-alsa-sink sink_name=ewx2496_out device=hw:2 channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
      load-module module-alsa-source source_name=ewx2496_in device=hw:2 channels=12 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9

      load-module module-alsa-sink sink_name=e192m_out device=hw:3
      load-module module-alsa-source source_name=e192m_in device=hw:3

      # Select default device
      set-default-sink nvidia_out 
      set-default-source nvidia_in
      ------------------------

      Note: We are telling pa to use devices identified by your system labeled hw:{0,1,2,3}... nothing special, except for the ewx2496 that uses the ice1712 device driver.  This is the same chip my tarjeta uses, and in that case I had to add extra information about the chip... the part that says "channel_map=..."  I'm not sure if the other tarjetas need special mappings or instructions, but give this a try.

      4) Restart pa ... in ubuntu, I would try "sudo /etc/init.d/pulseaudio {start,stop,...} and it would not give feedback if the server status had changed.  So I would use the pa manager (paman) to start/stop the pa server.  Frequently, I would not know if the server was still running and would use "ps aux | grep pulse" to check status.

      Let's see what happens


      Juan A Fuentes Bermudez wrote: 
        1) Tell me which cards are identified by the alsamixer and which cards are identified by pa(pulseaudio).

        asoundconf list
        Names of available sound cards:
        NVidia (identified by PA)
        HDMI
        EWX2496
        E192M (identified by PA)


        aplay -l
        **** Lista de PLAYBACK Dispositivos Hardware ****
        tarjeta 0: NVidia [HDA NVidia], dispositivo 0: AD198x Analog [AD198x Analog]
          Subdispositivos: 1/1
          Subdispositivo #0: subdevice #0
        tarjeta 0: NVidia [HDA NVidia], dispositivo 1: AD198x Digital [AD198x Digital]
          Subdispositivos: 1/1
          Subdispositivo #0: subdevice #0
        tarjeta 1: HDMI [HDA ATI HDMI], dispositivo 3: ATI HDMI [ATI HDMI]
          Subdispositivos: 1/1
          Subdispositivo #0: subdevice #0
        tarjeta 2: EWX2496 [TerraTec EWX24/96], dispositivo 0: ICE1712 multi [ICE1712 multi]
          Subdispositivos: 1/1
          Subdispositivo #0: subdevice #0
        tarjeta 3: E192M [ESI Waveterminal 192M], dispositivo 0: ICE1724 [ICE1724]
          Subdispositivos: 1/1
          Subdispositivo #0: subdevice #0
        tarjeta 3: E192M [ESI Waveterminal 192M], dispositivo 1: ICE1724 Secondary [ICE1724 Secondary]
          Subdispositivos: 1/1
          Subdispositivo #0: subdevice #0
        tarjeta 3: E192M [ESI Waveterminal 192M], dispositivo 2: ICE1724 Surrounds [ICE1724 Surround PCM]
          Subdispositivos: 3/3
          Subdispositivo #0: subdevice #0
          Subdispositivo #1: subdevice #1
          Subdispositivo #2: subdevice #2


        2) Can you make sound with your speakers with pa and the cards that it does identify?
        yes i need to route the sound thru the no identified sound cards via PA

        when i por example, play a mp3, i can route via alsa the sound thru devices that no identified in PA, i am sure that card is runing correctly


        sorry and very thank 


------------------------------------------------------------------------
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss at mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
  

--------------------------------------------------------------------------
      _______________________________________________
      pulseaudio-discuss mailing list
      pulseaudio-discuss at mail.0pointer.de
      https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss

----------------------------------------------------------------------------
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss at mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
  

------------------------------------------------------------------------------


  _______________________________________________
  pulseaudio-discuss mailing list
  pulseaudio-discuss at mail.0pointer.de
  https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20080603/2047050c/attachment.htm>