[pulseaudio-discuss] Help in setting up PA... SOLVED

Tue Jun 3 12:13:26 PDT 2008

hi, the problem is partial solved

i an coment and paste the module taht you say my

the pa server not start after reboot, 

i am coment and uncoment one to one, to discart waht is the card tthat cause problem , 

# Load the devices:
load-module module-alsa-sink sink_name=nvidia_out device=hw:0
load-module module-alsa-source source_name=nvidia_in device=hw:0

#load-module module-alsa-sink sink_name=hdmi_out device=hw:1
#load-module module-alsa-source source_name=hdmi_in device=hw:1

load-module module-alsa-sink sink_name=ewx2496_out device=hw:2 channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
load-module module-alsa-source source_name=ewx2496_in device=hw:2 channels=12 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9

#load-module module-alsa-sink sink_name=e192m_out device=hw:3
#load-module module-alsa-source source_name=e192m_in device=hw:3

in this mode, load pa server, and in the padevchooser apear the ewx2496 card :) very  happy 

when un coment the e192 card, again pa server not start same when uncoment hdmi card 

i like active also e192 card, is posible?

i am to paste this info, this is the first mail i want to send to list :

hi, the server not start, always i am login as root

can you test the information?

# grep pulse /var/log/messages
Jun  2 14:39:39 64-1 pulseaudio[6430]: main.c: This program is not intended to be run as root (unless --system is specified).
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 10.
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find fallback mixer control "PCM".
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 12.
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
Jun  2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  2 17:33:48 64-1 pulseaudio[6428]: main.c: This program is not intended to be run as root (unless --system is specified).
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 doesn't support 2 channels, changed to 10.
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 doesn't support sample format s16le, changed to s32le.
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find fallback mixer control "PCM".
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 doesn't support 2 channels, changed to 12.
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 doesn't support sample format s16le, changed to s32le.
Jun  2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  2 17:53:14 64-1 pulseaudio[6428]: module-x11-publish.c: PulseAudio information vanished from X11!
Jun  3 00:37:48 64-1 pulseaudio[6479]: main.c: This program is not intended to be run as root (unless --system is specified).
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 10.
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find fallback mixer control "PCM".
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 12.
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
Jun  3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  3 20:12:01 64-1 pulseaudio[6418]: main.c: This program is not intended to be run as root (unless --system is specified).
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device front:3 doesn't support sample format s16le, changed to s32le.
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 10.
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find fallback mixer control "PCM".
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 12.
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s32le.
Jun  3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find fallback mixer control "Mic".
Jun  3 20:25:33 64-1 pulseaudio[6445]: main.c: This program is not intended to be run as root (unless --sy

this is my curent default.pa

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

.fail

### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
#.ifexists module-hal-detect.so
#load-module module-hal-detect
#.else
### Alternatively use the static hardware detection module (for systems that
### lack HAL support)
#load-module module-detect
#.endif

# Load the devices:
load-module module-alsa-sink sink_name=nvidia_out device=hw:0
load-module module-alsa-source source_name=nvidia_in device=hw:0

load-module module-alsa-sink sink_name=hdmi_out device=hw:1
load-module module-alsa-source source_name=hdmi_in device=hw:1

load-module module-alsa-sink sink_name=ewx2496_out device=hw:2 channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
load-module module-alsa-source source_name=ewx2496_in device=hw:2 channels=12 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9

load-module module-alsa-sink sink_name=e192m_out device=hw:3
load-module module-alsa-source source_name=e192m_in device=hw:3

# Select default device
set-default-sink nvidia_out 
set-default-source nvidia_in

## Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor

### Automatically restore the volume of playback streams
load-module module-volume-restore

### Automatically restore the default sink/source when changed by the user during runtime
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Load X11 bell module
#load-module module-x11-bell sample=x11-bell

### Register ourselves in the X11 session manager
# Deactivated by default, to avoid deadlock when PA is started as esd from gnome-session
# Instead we load this via /etc/xdg/autostart/ and "pactl load-module" now
# load-module module-x11-xsmp

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Publish connection data in the X11 root window
.ifexists module-x11-publish.so
.nofail
load-module module-x11-publish
.fail
.endif

### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20080603/93618417/attachment.htm>