[pulseaudio-discuss] Mic not working with PA
remrot at gmail.com
remrot at gmail.com
Wed Sep 23 11:29:28 PDT 2009
Thanks a lot for your help!
I tried everything you suggested (except for checking /etc/pulse diffs,
I'll do that later) without any luck. But I attached the output of 'pacmd
list' as well as screenshots of pavucontrol and alsamixer. Imho, everything
looks right. When recording with audacity, I can select (in pavucontrol)
between the device itself and "monitor of" the device. When selecting the
device, the "recording cursor" in audacity does not even move (but
flickers). When selecting the monitor, the cursor moves but records nothing
but silence (look at the volume meter). Dito with the gnome-sound-recorder
(he even crashes on exit when recording directly from the device instead of
the monitor). I couldn't find a place where I can set the monitor as the
default recording device. I can only change that after recording has
started, which is quiet confusing... what's the point of these "monitors"
btw?
If you need more information just ask. I'd really like to get this to work!
Regards
JK
UPDATE : only 40KB are allowed for attachements, so I can only attach the
output of 'pacmd list'. I'll send another mail with the other screenshots
and hope it will be approved soon...
2009/9/23 Colin Guthrie <gmane at colin.guthr.ie>
> 'Twas brillig, and remrot at gmail.com at 23/09/09 09:56 did gyre and gimble:
>
>> I have a problem getting the mic to work on a Toshiba 100 with an ALC861
>> chipset (no builtin mic). I tried Ubuntu 9.04 and 9.10 Alpha with the same
>> results: the mic works during the live session but stops working after
>> installation. Because of that, it's very likely not a bug within the ALSA
>> driver but either a wrong configuration or a bug in a higher level
>> application like PA. I've already filed a bug report on launchpad, but got
>> no response so far:
>> https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/434511
>>
>> However, after doing a lot of search, it seems that there are more people
>> with similar problems and they "solved" them mostly by uninstalling PA. I
>> don't really want to do that (especially not in Ubuntu Karmic, since it's
>> deeply integrated) so I decided to ask for help on this mailing list.
>> Unfortunately, it's not my laptop and I only have access to it for the next
>> few days. So, if anyone has some suggestions on how to get the mic working
>> (or track down the bug) that would be really helpful...
>>
>
> The starting point would be to provide the output from:
>
> pacmd list
>
> Then to double check in pavucontol (the newest version - e.g. 0.9.9) which
> supports ports.
>
>
> 1. On the "Configuration" tab, you should have a profile selection drop
> down for your card. This should allow you to choose how your hardware works.
> e.g. you may have picked a 5.1 output profile which disables sound input
> (due to hardware limitations) or simply selected an output only profile. If
> so you would generally not get a list of devices under the "Input Devices"
> (with the default filter).
>
> If that doesn't solve the issue, look on the "Input Devices" tab and you
> should see the recording device. if there are multiple ports available then
> you should get a drop down there that you can use to switch ports.
>
> This may solve it for you.
>
> If all this fails, try a fresh user account or remove your ~/.pulse folder.
> If the live session works, then it could just be some thing in your config
> that's causing it, so trashing ~/.pulse is the easiest fix there (although
> double check /etc/pulse for differences in the files there from the live
> version too.
>
> HTHs
>
> Col
>
>
> --
>
> Colin Guthrie
> gmane(at)colin.guthr.ie
> http://colin.guthr.ie/
>
> Day Job:
> Tribalogic Limited [http://www.tribalogic.net/]
> Open Source:
> Mandriva Linux Contributor [http://www.mandriva.com/]
> PulseAudio Hacker [http://www.pulseaudio.org/]
> Trac Hacker [http://trac.edgewall.org/]
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20090923/6d0c7766/attachment.htm>
-------------- next part --------------
Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 42, size: 356,0 KB.
Memory blocks allocated during the whole lifetime: 59844, size: 120,2 MB.
Memory blocks imported from other processes: 39, size: 233,4 KB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_14.2.analog-stereo
Default source name: alsa_input.pci-0000_00_14.2.analog-stereo
Memory blocks of type POOL: 3 allocated/37378 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/13077 accumulated.
Memory blocks of type APPENDED: 0 allocated/3503 accumulated.
Memory blocks of type USER: 0 allocated/575 accumulated.
Memory blocks of type FIXED: 0 allocated/16144 accumulated.
Memory blocks of type IMPORTED: 39 allocated/2819 accumulated.
21 module(s) loaded.
index: 0
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "0.9.18"
index: 1
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "0.9.18"
index: 2
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "0.9.18"
index: 3
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "0.9.18"
index: 4
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "0.9.18"
index: 5
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1">
used: 1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "0.9.18"
index: 6
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "0.9.18"
index: 7
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "0.9.18"
index: 8
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "0.9.18"
index: 9
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "0.9.18"
index: 10
name: <module-gconf>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "0.9.18"
index: 11
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "0.9.18"
index: 12
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "0.9.18"
index: 13
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "0.9.18"
index: 14
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "0.9.18"
index: 15
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "0.9.18"
index: 16
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "0.9.18"
index: 17
name: <module-cork-music-on-phone>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute or cork music while a phone stream exists"
module.version = "0.9.18"
index: 18
name: <module-x11-publish>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "0.9.18"
index: 19
name: <module-x11-cork-request>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "0.9.18"
index: 20
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "0.9.18"
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_14.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 71% 1: 71%
0: -8,80 dB 1: -8,80 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 15 KiB
max rewind: 64 KiB
monitor source: 0
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 0,00 ms; range is 46,00 .. 341,33 ms
card: 0 <alsa_card.pci-0000_00_14.2>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC861 Analog"
alsa.id = "ALC861 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xd0000000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "437b"
device.product.name = "IXP SB4x0 High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC861"
alsa.components = "HDA:10ec0861,1179ff10,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
2 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_14.2.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 64 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 46,00 .. 341,33 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_14.2>
module: 5
properties:
device.description = "Monitor of Internes Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xd0000000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "437b"
device.product.name = "IXP SB4x0 High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_input.pci-0000_00_14.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 71% 1: 71%
0: -9,00 dB 1: -9,00 dB
balance 0,00
base volume: 28%
-33,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
card: 0 <alsa_card.pci-0000_00_14.2>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC861 Analog"
alsa.id = "ALC861 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xd0000000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "437b"
device.product.name = "IXP SB4x0 High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC861"
alsa.components = "HDA:10ec0861,1179ff10,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
10 client(s) logged in.
index: 0
driver: <module-console-kit.c>
owner module: 15
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2"
console-kit.session = "/org/freedesktop/ConsoleKit/Session2"
index: 3
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "2.28.0"
application.process.id = "2245"
application.process.user = "andi"
application.process.host = "andicompi"
application.process.binary = "gnome-settings-daemon"
window.x11.display = ":0.0"
application.language = "de_DE.UTF-8"
application.process.machine_id = "19bcb39a8ded77275c6c0c5a4ab768af"
application.process.session_id = "19bcb39a8ded77275c6c0c5a4ab768af-1253718369.653767-789323390"
index: 4
driver: <protocol-esound.c>
owner module: 8
properties:
application.name = "EsounD client (UNIX socket client)"
esound-protocol.peer = "UNIX socket client"
esound.byte_order = "native"
index: 6
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "GNOME Volume Control Applet"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "2.28.0"
application.process.id = "2288"
application.process.user = "andi"
application.process.host = "andicompi"
application.process.binary = "gnome-volume-control-applet"
window.x11.display = ":0.0"
application.language = "de_DE.UTF-8"
application.process.machine_id = "19bcb39a8ded77275c6c0c5a4ab768af"
application.process.session_id = "19bcb39a8ded77275c6c0c5a4ab768af-1253718369.653767-789323390"
index: 7
driver: <protocol-esound.c>
owner module: 8
properties:
application.name = "EsounD client (UNIX socket client)"
esound-protocol.peer = "UNIX socket client"
esound.byte_order = "native"
index: 8
driver: <protocol-esound.c>
owner module: 8
properties:
application.name = "EsounD client (UNIX socket client)"
esound-protocol.peer = "UNIX socket client"
esound.byte_order = "native"
index: 11
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Rhythmbox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.role = "music"
application.process.id = "2447"
application.process.user = "andi"
application.process.host = "andicompi"
application.process.binary = "rhythmbox"
application.icon_name = "rhythmbox"
window.x11.display = ":0.0"
application.language = "de_DE.UTF-8"
application.process.machine_id = "19bcb39a8ded77275c6c0c5a4ab768af"
application.process.session_id = "19bcb39a8ded77275c6c0c5a4ab768af-1253718369.653767-789323390"
index: 178
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
window.x11.display = ":0.0"
window.x11.screen = "0"
application.process.id = "2256"
application.process.user = "andi"
application.process.host = "andicompi"
application.process.binary = "metacity"
application.language = "de_DE.UTF-8"
application.process.machine_id = "19bcb39a8ded77275c6c0c5a4ab768af"
application.process.session_id = "19bcb39a8ded77275c6c0c5a4ab768af-1253718369.653767-789323390"
index: 179
driver: <protocol-esound.c>
owner module: 8
properties:
application.name = "EsounD client (UNIX socket client)"
esound-protocol.peer = "UNIX socket client"
esound.byte_order = "native"
index: 326
driver: <cli.c>
owner module: 20
properties:
application.name = "UNIX socket client"
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_14.2>
driver: <module-alsa-card.c>
owner module: 5
properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xd0000000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "437b"
device.product.name = "IXP SB4x0 High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
input:analog-stereo: Analog Stereo Input (priority 60)
off: Aus (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_14.2.analog-stereo/#0: Internes Audio Analog Stereo
sources:
alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#0: Monitor of Internes Audio Analog Stereo
alsa_input.pci-0000_00_14.2.analog-stereo/#1: Internes Audio Analog Stereo
1 sink input(s) available.
index: 1
driver: <protocol-native.c>
flags: START_CORKED
state: CORKED
sink: 0 <alsa_output.pci-0000_00_14.2.analog-stereo>
volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
muted: no
current latency: 330,68 ms
requested latency: 80,00 ms
sample spec: s32le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: speex-float-1
module: 9
client: 11 <Rhythmbox>
properties:
media.name = "'Heart Of Hearts' by '!!!'"
application.name = "Rhythmbox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.role = "music"
application.process.id = "2447"
application.process.user = "andi"
application.process.host = "andicompi"
application.process.binary = "rhythmbox"
application.icon_name = "rhythmbox"
window.x11.display = ":0.0"
application.language = "de_DE.UTF-8"
application.process.machine_id = "19bcb39a8ded77275c6c0c5a4ab768af"
application.process.session_id = "19bcb39a8ded77275c6c0c5a4ab768af-1253718369.653767-789323390"
module-stream-restore.id = "sink-input-by-media-role:music"
media.title = "Heart Of Hearts"
media.artist = "!!!"
0 source outputs(s) available.
12 cache entrie(s) available.
name: <dialog-error.ogg>
index: 0
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/dialog-error.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/dialog-error.ogg"
name: <bell.ogg>
index: 1
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/bell.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/bell.ogg"
name: <button-toggle-on.ogg>
index: 2
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/button-toggle-on.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/button-toggle-on.ogg"
name: <button-pressed.ogg>
index: 3
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/button-pressed.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/button-pressed.ogg"
name: <button-toggle-off.ogg>
index: 4
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/button-toggle-off.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/button-toggle-off.ogg"
name: <desktop-logout.ogg>
index: 5
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/desktop-logout.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/desktop-logout.ogg"
name: <window-slide.ogg>
index: 6
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/window-slide.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/window-slide.ogg"
name: <dialog-question.wav>
index: 7
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/dialog-question.wav>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/dialog-question.wav"
name: <phone-incoming-call.ogg>
index: 8
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/phone-incoming-call.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/phone-incoming-call.ogg"
name: <desktop-login.ogg>
index: 9
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/desktop-login.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/desktop-login.ogg"
name: <dialog-information.ogg>
index: 10
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/dialog-information.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/dialog-information.ogg"
name: <dialog-warning.ogg>
index: 11
sample spec: n/a
channel map: n/a
length: 0
duration: 0,0 s
volume: n/a
n/a
balance 0,00
lazy: yes
filename: </usr/share/sounds/ubuntu/stereo/dialog-warning.ogg>
properties:
media.role = "event"
media.filename = "/usr/share/sounds/ubuntu/stereo/dialog-warning.ogg"
>>>
More information about the pulseaudio-discuss
mailing list