[pulseaudio-discuss] Headless pulseaudio server. Creative XFi USB. Can't enable surround on Pulseaudio
Aitor Pazos
mail at aitorpazos.es
Sun Jan 23 01:30:51 PST 2011
speaker-test -Dsurround51:0 -c 6 -t wav
works fine, all speakers work
>
On Sunday 23 January 2011 00:14:26 Colin Guthrie wrote:
> 'Twas brillig, and Aitor Pazos at 22/01/11 23:15 did gyre and gimble:
> >> 1. Enable network support and use a GUI client on a non-headless
> >> system
> >> (e.g. PULSE_SERVER=<headless_ip> pavucontrol) and pick a 5.1
> >> Configuration profile.
> >
> > That's convenient, but the problem is that no 5.1 Configuration Profile
> > is listed
> >
> >> 2. Use "pacmd list-cards" to see a list of card profiles, then then
> >> use
> >> "pacmd set-card-profile idx profile" to set a 5.1 profile
> >
> > Same problem as in solution 1, no 5.1 profile listed.
> >
> >> 3. Set default-sample-channels=6 in /etc/pulse/daemon.conf
> >
> > I already did that with no effect. I've adjusted default-sample-rate,
> > but
> > setting default-sample-channels has no effects.
> >
> > pacmd list-cards output:
> > profiles:
> > output:analog-stereo: Analog Stereo
> > Output (priority 1000)
> > output:analog-stereo+input:analog-stere
> > o: Analog Stereo Duplex
> >
> > (priority 1010)
> >
> > output:analog-stereo+input:iec958-stereo
> > : Analog Stereo Output
> >
> > + Digital Stereo (IEC958) Input (priority 1005)
> >
> > output:iec958-stereo: Digital Stereo
> > Duplex (IEC958) (priority
> >
> > 500)
> >
> > output:iec958-stereo+input:analog-stereo
> > : Digital Stereo
> >
> > (IEC958) Output + Analog Stereo Input (priority 510)
> >
> > output:iec958-stereo+input:iec958-stereo
> > : Digital Stereo
> >
> > (IEC958) Output + Digital Stereo (IEC958) Input (priority 505)
> >
> > input:analog-stereo: Analog Stereo Input
> > (priority 10)
> > input:iec958-stereo: Digital Stereo
> > (IEC958) Input (priority
> >
> > 5)
> >
> > off: Apagado (priority 0)
> >
> > active profile:
> > <output:analog-stereo+input:analog-stereo>
>
> Hmm, seems no surround profile is detected.
>
> We rely on ALSA to support this, but obviously surround51 or any other
> analogue surround system isn't working.
>
> I suggest you try to debug at the ALSA level using e.g. speaker-test -D
> surround51:0 -c 6
>
> If the surround51 thing works, then PA should automatically see it.
>
> Col
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 230 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110123/846c22a4/attachment.pgp>
More information about the pulseaudio-discuss
mailing list