[pulseaudio-discuss] [PATCH 07/11] alsa-mixer: Remove workaround for USB head/handsets

[Colin Guthrie]

Now that subset mixer paths are removed, this workaround is no longer needed.

This effectively reverts 1c38b5d4787d9466bd7bd5910d27e501298ec778 but due
to me forgetting to add files and adding a couple extra workarounds after,
it's easier to just do this manually rather than run git-revert.
---
 src/Makefile.am                                    |    3 +-
 .../alsa/mixer/profile-sets/90-pulseaudio.rules    |    9 -----
 .../alsa/mixer/profile-sets/usb-headset.conf       |   35 --------------------
 3 files changed, 1 insertions(+), 46 deletions(-)
 delete mode 100644 src/modules/alsa/mixer/profile-sets/usb-headset.conf

diff --git a/src/Makefile.am b/src/Makefile.am
index 9117004..ebf5ebc 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1069,8 +1069,7 @@ dist_alsaprofilesets_DATA = \
 		modules/alsa/mixer/profile-sets/native-instruments-traktor-audio6.conf \
 		modules/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf \
 		modules/alsa/mixer/profile-sets/native-instruments-traktorkontrol-s4.conf \
-		modules/alsa/mixer/profile-sets/native-instruments-korecontroller.conf \
-		modules/alsa/mixer/profile-sets/usb-headset.conf
+		modules/alsa/mixer/profile-sets/native-instruments-korecontroller.conf
 
 if HAVE_UDEV
 dist_udevrules_DATA = \
diff --git a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
index e1da331..0329340 100644
--- a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
+++ b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
@@ -20,15 +20,6 @@ SUBSYSTEM!="sound", GOTO="pulseaudio_end"
 ACTION!="change", GOTO="pulseaudio_end"
 KERNEL!="card*", GOTO="pulseaudio_end"
 
-# Some specific work arounds until we can handle heasets/handsets properly (i.e. "Speaker" only, no "master")
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="01ab", ENV{PULSE_PROFILE_SET}="usb-headset.conf"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="0a0c", ENV{PULSE_PROFILE_SET}="usb-headset.conf"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1395", ATTRS{idProduct}=="0002", ENV{PULSE_PROFILE_SET}="usb-headset.conf"
-# UAC1.0 Sennheiser Dongle
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1395", ATTRS{idProduct}=="3554", ENV{PULSE_PROFILE_SET}="usb-headset.conf"
-# BT Agile Handset
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1885", ATTRS{idProduct}=="0501", ENV{PULSE_PROFILE_SET}="usb-headset.conf"
-
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{PULSE_PROFILE_SET}="native-instruments-audio8dj.conf"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="0839", ENV{PULSE_PROFILE_SET}="native-instruments-audio4dj.conf"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="baff", ENV{PULSE_PROFILE_SET}="native-instruments-traktorkontrol-s4.conf"
diff --git a/src/modules/alsa/mixer/profile-sets/usb-headset.conf b/src/modules/alsa/mixer/profile-sets/usb-headset.conf
deleted file mode 100644
index adf78d1..0000000
--- a/src/modules/alsa/mixer/profile-sets/usb-headset.conf
+++ /dev/null
@@ -1,35 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; This is a workaround - these usb headsets have one output volume control only, labeled "Speaker".
-; This causes the default profile set to not control the volume at all, which is a bug.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output-speaker
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:%f
-channel-map = left,right
-paths-output = analog-output-speaker
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-- 
1.7.6