July 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jul 1 01:10:11 PDT 2011
Ending: Sat Jul 30 06:42:59 PDT 2011
Messages: 263

• [pulseaudio-discuss] understanding PA cork/uncorking scenarios   Colin Guthrie
  • [pulseaudio-discuss] understanding PA cork/uncorking scenarios   Himanshu Chug
  • [pulseaudio-discuss] PulseAudio native protocol   Emil Ohlsson
    • [pulseaudio-discuss] PulseAudio native protocol   Colin Guthrie
      • [pulseaudio-discuss] PulseAudio native protocol   Maarten Bosmans
      • [pulseaudio-discuss] PulseAudio native protocol   Emil Ohlsson
      • [pulseaudio-discuss] PulseAudio native protocol   Bart Cerneels
      • [pulseaudio-discuss] PulseAudio native protocol   Emil Ohlsson
      • [pulseaudio-discuss] PulseAudio native protocol   Colin Guthrie
• [pulseaudio-discuss] [RFC] Should we set Front=0dB for the headphone path?   David Henningsson
  • [pulseaudio-discuss] [RFC] Should we set Front=0dB for the headphone path?   Colin Guthrie
    • [pulseaudio-discuss] [RFC] Should we set Front=0dB for the headphone path?   David Henningsson
      • [pulseaudio-discuss] [PATCH] module-waveout: Correctly handle mono volume controls on waveout device   Maarten Bosmans
      • [pulseaudio-discuss] [PATCH] module-waveout: Correctly handle mono volume controls on waveout device   Colin Guthrie
      • [pulseaudio-discuss] [RFC] Fix up alsa mixer handling for varying port capabilities   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 1/4] devices: Deprecate the HW_VOLUME/MUTE_CTRL and DECIBEL_VOLUME device flags.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 2/4] alsa: Reinitialise the mixer on port change.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 2/4] alsa: Reinitialise the mixer on port change.   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 3/4] alsa-mixer: Do not 'unify' mixer paths.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.   David Henningsson
      • [pulseaudio-discuss] [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.   David Henningsson
      • [pulseaudio-discuss] [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.   David Henningsson
      • [pulseaudio-discuss] [RFC] Fix up alsa mixer handling for varying port capabilities   Colin Guthrie
  • [pulseaudio-discuss] Mute mic output keeping its input working   Marcos Mello
    • [pulseaudio-discuss] Mute mic output keeping its input working   David Henningsson
      • [pulseaudio-discuss] Mute mic output keeping its input working   Marcos Felipe Rasia de Mello
  • [PATCH] alsa-mixer: Set "Front" control to 0 dB on headphone path   David Henningsson
• [pulseaudio-discuss] Mute mic output keeping its input working   David Henningsson
  • [pulseaudio-discuss] Mute mic output keeping its input working   Marcos Felipe Rasia de Mello
• [pulseaudio-discuss] Jack detection - from the other side   David Henningsson
  • [pulseaudio-discuss] Jack detection - from the other side   Tanu Kaskinen
    • [pulseaudio-discuss] Jack detection - from the other side   Mark Brown
    • [pulseaudio-discuss] Jack detection - from the other side   David Henningsson
• [pulseaudio-discuss] Ports and profiles   David Henningsson
• [pulseaudio-discuss] [PATCHv3 0/4] Read and store UCM data as proplist   Mark Brown
  • [pulseaudio-discuss] [PATCHv3 0/4] Read and store UCM data as proplist   Colin Guthrie
    • [pulseaudio-discuss] [RFC] Introduce "available" concept for ports, and communicate that to clients.   David Henningsson
  • [pulseaudio-discuss] Porting pulseaudio to Android   Vikram Gupta
    • [pulseaudio-discuss] Porting pulseaudio to Android   Colin Guthrie
      • [pulseaudio-discuss] Porting pulseaudio to Android   Vikram Gupta
      • [pulseaudio-discuss] Porting pulseaudio to Android   Colin Guthrie
      • [pulseaudio-discuss] Porting pulseaudio to Android   Spidey / Claudio
      • [pulseaudio-discuss] Porting pulseaudio to Android   Vikram Gupta
• [pulseaudio-discuss] Headset-detection   Himanshu Chug
  • [pulseaudio-discuss] Headset-detection   Colin Guthrie
    • [pulseaudio-discuss] Headset-detection   Himanshu Chug
      • [pulseaudio-discuss] Headset-detection   Colin Guthrie
      • [pulseaudio-discuss] Headset-detection   Himanshu Chug
      • [pulseaudio-discuss] Headset-detection   Colin Guthrie
      • [pulseaudio-discuss] Headset-detection   Himanshu Chug
      • [pulseaudio-discuss] Headset-detection   Colin Guthrie
      • [pulseaudio-discuss] Headset-detection   Himanshu Chug
      • [pulseaudio-discuss] Headset-detection   Colin Guthrie
      • [pulseaudio-discuss] Headset-detection   Spidey / Claudio
      • [pulseaudio-discuss] Headset-detection   Himanshu Chug
      • [pulseaudio-discuss] Headset-detection   Colin Guthrie
      • [pulseaudio-discuss] Headset-detection   Colin Guthrie
• [pulseaudio-discuss] LADSPA parameters   Nik Lutz
  • [pulseaudio-discuss] LADSPA parameters   Colin Guthrie
    • [pulseaudio-discuss] LADSPA parameters   Nik Lutz
    • [pulseaudio-discuss] Various tidyups to alsa mixer   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 1/8] devices: Set certain sink/source flags automatically.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 2/8] alsa: Reinitialise the mixer on port change.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 2/8] alsa: Reinitialise the mixer on port change.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 2/8] alsa: Reinitialise the mixer on port change.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 2/8] alsa: Reinitialise the mixer on port change.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 2/8] alsa: Reinitialise the mixer on port change.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 3/8] alsa-mixer: Do not 'unify' mixer paths.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 3/8] alsa-mixer: Do not 'unify' mixer paths.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 3/8] alsa-mixer: Do not 'unify' mixer paths.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 4/8] alsa-mixer: Detect and then drop pointless paths in the path set.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 4/8] alsa-mixer: Detect and then drop pointless paths in the path set.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 4/8] alsa-mixer: Detect and then drop pointless paths in the path set.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 5/8] alsa: No need to go via sink/source to get the core.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 6/8] alsa-mixer: Remove workaround for USB head/handsets   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 7/8] devices: Send a SYNC volumes message on port change to ensure volumes are propigated to the underlying device.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 8/8] alsa-mixer: Attempt to fix hardware volumes on init and after port switch.   Colin Guthrie
• [pulseaudio-discuss] [RFC 0/4] Profiles can have ports   David Henningsson
  • [pulseaudio-discuss] [PATCH 1/4] Introduce "available" concept for ports, and communicate that to clients.   David Henningsson
  • [pulseaudio-discuss] [PATCH 2/4] Create a port even if there is only one path/setting combination   David Henningsson
  • [pulseaudio-discuss] [PATCH 3/4] Turn device-ports into reference counted objects   David Henningsson
  • [pulseaudio-discuss] [PATCH 4/4] Profiles can have sink and source ports, and announce that through the API.   David Henningsson
• [pulseaudio-discuss] default port 4713   Brian Chapman
  • [pulseaudio-discuss] default port 4713   Jan Steffens
  • [pulseaudio-discuss] default port 4713   Colin Guthrie
• [pulseaudio-discuss] Pulseaudio per-user instance unusable   Joel A Fernandes
  • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Joel A Fernandes
    • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Sean McNamara
  • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Colin Guthrie
    • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Joel A Fernandes
    • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Joel A Fernandes
      • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Colin Guthrie
      • [pulseaudio-discuss] Pulseaudio per-user instance unusable   Paul Menzel
• [pulseaudio-discuss] [PATCHv3 1/4] alsa: Export alsa-mixer API   David Henningsson
• [pulseaudio-discuss] [PATCHv3 3/4] alsa: Add UCM API for managing UCM propoerties   David Henningsson
  • [pulseaudio-discuss] [PATCHv3 3/4] alsa: Add UCM API for managing UCM propoerties   Mark Brown
• [pulseaudio-discuss] [PATCHv3 4/4] alsa: Support UCM profiles in module-alsa-card   David Henningsson
• [pulseaudio-discuss] Reading sound samples from different applications   Varun Vijayaraghavan
  • [pulseaudio-discuss] Reading sound samples from different applications   Colin Guthrie
• [pulseaudio-discuss] 2 minor issues noticed with padsp   Arun Raghavan
  • [pulseaudio-discuss] 2 minor issues noticed with padsp   Colin Guthrie
• [pulseaudio-discuss] Audio BoF at Desktop Summit   Arun Raghavan
  • [pulseaudio-discuss] Audio BoF at Desktop Summit   Alexander E. Patrakov
  • [pulseaudio-discuss] Jitter when using compositing (a.k.a. screen effects) in KDE 4   Frode Severin Hatlevik
    • [pulseaudio-discuss] Jitter when using compositing (a.k.a. screen effects) in KDE 4   Colin Guthrie
• [pulseaudio-discuss] [LAU] pulseaudio in realtime mode   Dominic Sacré
  • [PATCH] reset revents if meet underrun case   xingchao
• [pulseaudio-discuss] Command Line Interface for pavucontrol   Colin Guthrie
  • [pulseaudio-discuss] Command Line Interface for pavucontrol   Maarten Bosmans
• [pulseaudio-discuss] How to undefine "DBUS_TYPE_UNIX_FD" for bluetooth-util.c? Bluetooth module gave "Error from RegisterEndpoint reply: org.freedesktop.DBus.Error.UnknownMethod"   Lin, Mengdong
  • [pulseaudio-discuss] How to undefine "DBUS_TYPE_UNIX_FD" for bluetooth-util.c? Bluetooth module gave "Error from RegisterEndpoint reply: org.freedesktop.DBus.Error.UnknownMethod"   Luiz Augusto von Dentz
• [pulseaudio-discuss] pulseaudio mixer   Himanshu Chug
  • [pulseaudio-discuss] pulseaudio mixer   Colin Guthrie
• [pulseaudio-discuss] Does pulseaudio resample when source and sink sample rate / bits are identical?   Joshua Redstone
  • [pulseaudio-discuss] Does pulseaudio resample when source and sink sample rate / bits are identical?   Colin Guthrie
    • [pulseaudio-discuss] Does pulseaudio resample when source and sink sample rate / bits are identical?   Joshua Redstone
      • [pulseaudio-discuss] Does pulseaudio resample when source and sink sample rate / bits are identical?   Colin Guthrie
      • [pulseaudio-discuss] Does pulseaudio resample when source and sink sample rate / bits are identical?   Joshua Redstone
      • [pulseaudio-discuss] Does pulseaudio resample when source and sink sample rate / bits are identical?   Colin Guthrie
• [pulseaudio-discuss] Writing an output module   Damien DEJEAN
  • [pulseaudio-discuss] Writing an output module   Colin Guthrie
    • [pulseaudio-discuss] Writing an output module   Damien DEJEAN
      • [pulseaudio-discuss] Writing an output module   Colin Guthrie
• [pulseaudio-discuss] Issue with access   Fred Frigerio
  • [pulseaudio-discuss] Issue with access   Spidey / Claudio
  • [pulseaudio-discuss] Issue with access   Colin Guthrie
    • [pulseaudio-discuss] Issue with access   Fred Frigerio
      • [pulseaudio-discuss] Issue with access   Colin Guthrie
      • [pulseaudio-discuss] Issue with access   Fred Frigerio
      • [pulseaudio-discuss] Issue with access   Colin Guthrie
      • [pulseaudio-discuss] Issue with access   Fred Frigerio
      • [pulseaudio-discuss] Issue with access   Colin Guthrie
      • [pulseaudio-discuss] Issue with access   Fred Frigerio
      • [pulseaudio-discuss] Issue with access   Fred Frigerio
      • [pulseaudio-discuss] [v2] Various tidy ups to alsa mixer.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 01/11] devices: Use wrapper functions to set the *_volume and *_mute callbacks.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 01/11] devices: Use wrapper functions to set the *_volume and *_mute callbacks.   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 02/11] devices: Set certain sink/source flags automatically.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 03/11] alsa: Reinitialise the mixer on port change.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 03/11] alsa: Reinitialise the mixer on port change.   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 03/11] alsa: Reinitialise the mixer on port change.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 04/11] alsa-mixer: Do not 'unify' mixer paths.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 06/11] alsa: No need to go via sink/source to get the core.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 07/11] alsa-mixer: Remove workaround for USB head/handsets   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 08/11] devices: Send a SYNC volumes message on port change to ensure volumes are propigated to the underlying device.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 09/11] alsa-mixer: Attempt to fix hardware volumes on init and after port switch.   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 10/11] reserve: Fix compile warning when compiling without dbus   Colin Guthrie
      • [pulseaudio-discuss] [PATCH 11/11] Questions for Tanu   Colin Guthrie
      • [pulseaudio-discuss] [v2] Various tidy ups to alsa mixer.   Colin Guthrie
• [pulseaudio-discuss] libpulse deadlock   Rémi Denis-Courmont
  • [pulseaudio-discuss] libpulse deadlock   Colin Guthrie
  • [pulseaudio-discuss] libasound_module_*_pulse   Vallabha Hampiholi
    • [pulseaudio-discuss] libasound_module_*_pulse   Colin Guthrie
• [pulseaudio-discuss] New Wiki page: http://pulseaudio.org/wiki/WritingProfiles   Alex Wolfson
  • [pulseaudio-discuss] New Wiki page: http://pulseaudio.org/wiki/WritingProfiles   Colin Guthrie
    • [pulseaudio-discuss] Getting error while running paplay binary   chinmaya hoshing
      • [pulseaudio-discuss] Getting error while running paplay binary   Colin Guthrie
    • [pulseaudio-discuss] Pulseaudio 0.9.22 failure   Joel A Fernandes
      • [pulseaudio-discuss] Pulseaudio 0.9.22 failure   Colin Guthrie
      • [pulseaudio-discuss] [PATCH] virtual: Fix volume callback setting.   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] virtual: Fix volume callback setting.   Colin Guthrie
• [pulseaudio-discuss] Getting error in running paplay binary   chinmaya hoshing
  • [pulseaudio-discuss] Getting error in running paplay binary   Colin Guthrie
  • [pulseaudio-discuss] [PulseAudio] No sound while Testing Pulseaudio on Beagleboard   v sailaja
    • [pulseaudio-discuss] [PulseAudio] No sound while Testing Pulseaudio on Beagleboard   Colin Guthrie
• [pulseaudio-discuss] Choppy Sound with Pulsesink on ARM   Vallabha Hampiholi
• [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
  • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Colin Guthrie
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Colin Guthrie
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Arun Raghavan
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Arun Raghavan
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Alexander E. Patrakov
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Arun Raghavan
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Arun Raghavan
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Alexander E. Patrakov
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Alexander E. Patrakov
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Alexander E. Patrakov
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   ABDUL MOIZ
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Lin, Mengdong
    • [pulseaudio-discuss] Need help to enable echo cancel in pulseaudio   Colin Guthrie
    • [pulseaudio-discuss] Choppy Sound with Pulsesink on ARM   Vallabha Hampiholi
      • [pulseaudio-discuss] Choppy Sound with Pulsesink on ARM   Colin Guthrie
• [pulseaudio-discuss] New Wiki page:, http://pulseaudio.org/wiki/WritingProfiles   Alex Wolfson
  • [pulseaudio-discuss] New Wiki page:, http://pulseaudio.org/wiki/WritingProfiles   Colin Guthrie
• [pulseaudio-discuss] analog-stereo.echo-cancel idle for too long, suspending ...   ashwanik
  • [pulseaudio-discuss] analog-stereo.echo-cancel idle for too long, suspending ...   Colin Guthrie
  • [pulseaudio-discuss] pulseaudio 0.9.22   Joel A Fernandes
• [pulseaudio-discuss] pulseaudio 0.9.22   Colin Guthrie
• [pulseaudio-discuss] avoid increase watermark for low latency capture   xing wang
  • [pulseaudio-discuss] avoid increase watermark for low latency capture   pl bossart
    • [pulseaudio-discuss] avoid increase watermark for low latency capture   xing wang
    • [pulseaudio-discuss] avoid increase watermark for low latency capture   xing wang
    • [pulseaudio-discuss] avoid increase watermark for low latency capture   Colin Guthrie
    • [pulseaudio-discuss] avoid increase watermark for low latency capture   pl bossart
  • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
    • [pulseaudio-discuss] PulseSink Properties   Colin Guthrie
      • [pulseaudio-discuss] PulseSink Properties   pl bossart
      • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
      • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
      • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
      • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
      • [pulseaudio-discuss] PulseSink Properties   Colin Guthrie
      • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
      • [pulseaudio-discuss] PulseSink Properties   pl bossart
      • [pulseaudio-discuss] PulseSink Properties   Vallabha Hampiholi
• [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Maystar at web.de
  • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Himanshu Chug
  • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Maarten Bosmans
  • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Colin Guthrie
    • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Maystar at web.de
      • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Colin Guthrie
    • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Maystar at web.de
      • [pulseaudio-discuss] Pulseaudio runs as mpd user after login   Colin Guthrie
      • [pulseaudio-discuss] [PATCH] alsa-mixer: Fix element_is_subset().   Tanu Kaskinen
  • [pulseaudio-discuss] [PulseAudio-Discuss] PulseAudio System Timer Requirements   Vallabha Hampiholi
    • [pulseaudio-discuss] [PulseAudio-Discuss] PulseAudio System Timer Requirements   Vallabha Hampiholi
• [pulseaudio-discuss] unable to play very small beep (.wav) sounds   Himanshu Chug
  • [pulseaudio-discuss] unable to play very small beep (.wav) sounds   Tanu Kaskinen
    • [pulseaudio-discuss] unable to play very small beep (.wav) sounds   Himanshu Chug
    • [pulseaudio-discuss] unable to play very small beep (.wav) sounds   Tanu Kaskinen
  • [pulseaudio-discuss] PulseAudio crash   Vallabha Hampiholi
    • [pulseaudio-discuss] PulseAudio crash   Colin Guthrie
      • [pulseaudio-discuss] PulseAudio crash   Colin Guthrie
• [pulseaudio-discuss] pulseaudio for omap4   ashwanik
  • [pulseaudio-discuss] [PATCH] build-sys: Check for necessary programs in bootstrap.sh   Maarten Bosmans
  • [pulseaudio-discuss] [PATCH] build-sys: Check for necessary programs in bootstrap.sh   Colin Guthrie
  • [pulseaudio-discuss] [PATCH] build-sys: Check for necessary programs in bootstrap.sh   Maarten Bosmans
  • [pulseaudio-discuss] [PATCH] build-sys: Check for necessary programs in bootstrap.sh   Colin Guthrie
• [pulseaudio-discuss] How to debug a deadlock on audio routing?   Lin, Mengdong
  • [pulseaudio-discuss] How to debug a deadlock on audio routing?   Tanu Kaskinen
    • [pulseaudio-discuss] How to debug a deadlock on audio routing?   Lin, Mengdong
• [pulseaudio-discuss] How is a message handled by a filter sink and its master sink?   Lin, Mengdong
  • [pulseaudio-discuss] How is a message handled by a filter sink and its master sink?   pl bossart
• [pulseaudio-discuss] How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.   Lin, Mengdong
  • [pulseaudio-discuss] How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.   ABDUL MOIZ
    • [pulseaudio-discuss] How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.   Lin, Mengdong
• [pulseaudio-discuss] How to specify default soundcard?   Clemens Eisserer
  • [pulseaudio-discuss] How to specify default soundcard?   Colin Guthrie
• [pulseaudio-discuss] What does pulseaudio use all the cpu-cycles for?   Clemens Eisserer
  • [pulseaudio-discuss] What does pulseaudio use all the cpu-cycles for?   Rémi Denis-Courmont
    • [pulseaudio-discuss] What does pulseaudio use all the cpu-cycles for?   Colin Guthrie

Last message date: Sat Jul 30 06:42:59 PDT 2011
Archived on: Thu Aug 4 17:40:45 PDT 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...