[pulseaudio-discuss] Issue with multiple hdmi codecs in radeonhd, hacked to work
John Ettedgui
john.ettedgui at gmail.com
Wed Dec 4 23:40:50 PST 2013
On Wed, Dec 4, 2013 at 11:24 PM, Raymond Yau <superquad.vortex2 at gmail.com>wrote:
>
>
>
>>>>> I just changed my RadeonHD 4670 for a 7870, and now when I type "aplay
>>>>> -l" I get many HDMI codecs instead of just one like for the previous card.
>>>>>
>>>>
> How many hdmi , dvi or display port connectors do your card have ?
>
> 1 hdmi, 1 vga, 2 tiny ports that I cannot name.
>
> Specification seem support up to 6 displays
>
I believe these are virtual HDMI ouputs, not physical ones and total for 6
in aplay -l and for 4 in aplay -L.
>
>
>>>>
>>>> Oh interesting, but I was just using the standard HDMI connector of the
>>> VGA card without connecting my card to the motherboard by more than PCI-E.
>>> Also, spdif would not get me 6 channels in LCPM, so I don't think that
>>> was it but I could be wrong.
>>>
>>>>
>>>>
>>>>
> Is there any reason for you to disable on-board hda controller and alc888
>
Hmmm, I don't really remember why I did it back then, but probably because
using alsamixer and alsamixer -c0 felt easier than alsamixer and
alsamixer-c1 or something like that.
> as you don't have any capture device anymore?
>
Yup, but I haven't use any in years anyway.
>
> pactl list
>
> attached to this mail.
> Do pulseaudio server select null sink or hdmi.monitor as the default
> source ?
>
The way I read it in the log hdmi.monitor:
" Description: Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD
7700/7800 Series] Digital Surround 5.1 (HDMI 0)"
"device.class = "monitor""
>
>
>>>>> When I type "aplay -L" I get one more codec that I can see it in the
>>>>> pavucontrol profile (not sure which one as the names are irrelevant)
>>>>>
>>>>>
>>>>> if in default.pa I specify the alsa sink device=hw:0,3 directly, I do
>>>>> get sound, but then in pavucontrol I do not get the advanced sub-menu
>>>>> anymore which makes me think something is not working properly...
>>>>>
>>>>> For now I have settled on this hack instead:
>>>>>
>>>>>
>>>>> I changed the extra-hdmi.conf in
>>>>> /usr/share/pulseaudio/alsa-mixer/profile-sets file to :
>>>>>
>>>>> [Mapping hdmi-surround-extra0]
>>>>> description = Digital Surround 5.1 (HDMI 0)
>>>>> device-strings = hdmi:%f,0
>>>>> paths-output = hdmi-output-0
>>>>> channel-map =
>>>>> front-left,front-right,rear-left,rear-right,front-center,lfe
>>>>> priority = 1
>>>>> direction = output
>>>>>
>>>>> [Mapping hdmi-surround-extra3]
>>>>> description = Digital Surround 5.1 (HDMI 3)
>>>>> device-strings = hdmi:%f,0
>>>>> paths-output = hdmi-output-3
>>>>> channel-map =
>>>>> front-left,front-right,rear-left,rear-right,front-center,lfe
>>>>> priority = 1
>>>>> direction = output
>>>>>
>>>>> I only need one of these two, somehow they both work...
>>>>>
>>>>> Now everything works for me, but since it's not out of the box, I am
>>>>> guessing there might be something out there to fix.
>>>>>
>>>>>
>>>>>
>>>>
>>>> https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=5a61358433b1f89b500f2c365746c73cb7a27e2f
>>>>
>>>> Hmmm I am not sure what you meant by that.
>>>
>>>
>> Here is the alsa-info.
>>
>
>
> strange that all jacks return true
> control.1 {
> iface CARD
> name 'HDMI/DP,pcm=3 Jack'
> value true
> comment {
> access read
> type BOOLEAN
> count 1
> }
> }
> ...
>
> control.31 {
> iface CARD
> name 'HDMI/DP,pcm=11 Jack'
> value true
> comment {
> access read
> type BOOLEAN
> count 1
> }
> }
>
>
> cat /proc/asound/card0/eld#*.0
>
> attached
> does your hdmi montior name appear in one of the six eld
>
> It appears exactly in the 0 one you mentioned above.:
"monitor_present 1
eld_valid 1
monitor_name
connection_type HDMI"
>
> [ 5.468413] [drm] Connector 2:
> [ 5.468414] [drm] HDMI-A-1
> [ 5.468415] [drm] HPD1
>
>
> Does the graphic driver show which hdmi monitor connect to which ports in
> system log ?
>
> I cannot find anything like that in dmesg, but I see this in Xorg.log if
> that helps:
>
"[ 8.292] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=9 (/dev/input/event8)
[ 8.292] (II) No input driver specified, ignoring this device.
[ 8.292] (II) This device may have been added with another device file.
[ 8.293] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=10 (/dev/input/event7)
[ 8.293] (II) No input driver specified, ignoring this device.
[ 8.293] (II) This device may have been added with another device file.
[ 8.293] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=11 (/dev/input/event6)
[ 8.293] (II) No input driver specified, ignoring this device.
[ 8.293] (II) This device may have been added with another device file.
[ 8.293] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=3 (/dev/input/event11)
[ 8.293] (II) No input driver specified, ignoring this device.
[ 8.293] (II) This device may have been added with another device file.
[ 8.293] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=7 (/dev/input/event10)
[ 8.293] (II) No input driver specified, ignoring this device.
[ 8.293] (II) This device may have been added with another device file.
[ 8.294] (II) config/udev: Adding input device HDA ATI HDMI
HDMI/DP,pcm=8 (/dev/input/event9)
[ 8.294] (II) No input driver specified, ignoring this device."
Thank you!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20131204/a64bc9a5/attachment-0001.html>
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "4.0-271-g09e8-dirty"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "4.0-271-g09e8-dirty"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0-271-g09e8-dirty"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "4.0-271-g09e8-dirty"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument: tsched=0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "4.0-271-g09e8-dirty"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 2
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0-271-g09e8-dirty"
Module #7
Name: module-jackdbus-detect
Argument: channels=2
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is started"
module.version = "4.0-271-g09e8-dirty"
Module #8
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "4.0-271-g09e8-dirty"
Module #9
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "4.0-271-g09e8-dirty"
Module #10
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "4.0-271-g09e8-dirty"
Module #11
Name: module-bluez4-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 4 Bluetooth audio devices and load BlueZ 4 Bluetooth audio drivers"
module.version = "4.0-271-g09e8-dirty"
Module #12
Name: module-esound-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "4.0-271-g09e8-dirty"
Module #13
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0-271-g09e8-dirty"
Module #14
Name: module-gconf
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "4.0-271-g09e8-dirty"
Module #15
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "4.0-271-g09e8-dirty"
Module #16
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "4.0-271-g09e8-dirty"
Module #17
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "4.0-271-g09e8-dirty"
Module #18
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "4.0-271-g09e8-dirty"
Module #19
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "4.0-271-g09e8-dirty"
Module #20
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "4.0-271-g09e8-dirty"
Module #21
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "4.0-271-g09e8-dirty"
Module #22
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "4.0-271-g09e8-dirty"
Module #23
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "4.0-271-g09e8-dirty"
Module #24
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0-271-g09e8-dirty"
Module #25
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "4.0-271-g09e8-dirty"
Module #26
Name: module-dbus-protocol
Argument:
Usage counter: n/a
Properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "4.0-271-g09e8-dirty"
Module #27
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0-271-g09e8-dirty"
Module #28
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0-271-g09e8-dirty"
Module #29
Name: module-device-manager
Argument: do_routing=1
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
module.version = "4.0-271-g09e8-dirty"
Module #30
Name: module-x11-xsmp
Argument: display=:0 session_manager=local/HTPC:@/tmp/.ICE-unix/680,unix/HTPC:/tmp/.ICE-unix/680
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0-271-g09e8-dirty"
Sink #0
State: RUNNING
Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra0
Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI 0)
Driver: module-alsa-card.c
Sample Specification: s16le 6ch 48000Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-surround-extra0.monitor
Latency: 99978 usec, configured 100000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aab0"
device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
device.string = "hdmi:0,0"
device.buffering.buffer_size = "57600"
device.buffering.fragment_size = "11520"
device.access_mode = "mmap"
device.profile.name = "hdmi-surround-extra0"
device.profile.description = "Digital Surround 5.1 (HDMI 0)"
device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI 0)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
Active Port: hdmi-output-0
Formats:
ac3-iec61937, format.rate = "[ 32000, 44100, 48000, 88200, 96000, 176400, 192000 ]"
dts-iec61937, format.rate = "[ 32000, 44100, 48000, 88200, 96000, 176400, 192000 ]"
pcm
Source #0
State: IDLE
Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra0.monitor
Description: Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI 0)
Driver: module-alsa-card.c
Sample Specification: s16le 6ch 48000Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-surround-extra0
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI 0)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aab0"
device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Sink Input #27
Driver: protocol-native.c
Owner Module: 13
Client: 35
Sink: 0
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 103015 usec
Sink Latency: 99985 usec
Resample method: speex-float-9
Properties:
media.name = "Simple DirectMedia Layer"
application.name = "gtk-gnash"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "4639"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "gtk-gnash"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
module-stream-restore.id = "sink-input-by-application-name:gtk-gnash"
Sink Input #29
Driver: protocol-native.c
Owner Module: 13
Client: 37
Sink: 0
Sample Specification: float32le 6ch 48000Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "6" format.channel_map = "\"front-left,front-right,rear-left,rear-right,front-center,lfe\""
Corked: yes
Mute: no
Volume: front-left: 52428 / 80% / -5.81 dB, front-right: 52428 / 80% / -5.81 dB, rear-left: 52428 / 80% / -5.81 dB, rear-right: 52428 / 80% / -5.81 dB, front-center: 52428 / 80% / -5.81 dB, lfe: 52428 / 80% / -5.81 dB
balance 0.00
Buffer Latency: 276458 usec
Sink Latency: 99984 usec
Resample method: copy
Properties:
media.name = "Yes Man (2008).mkv"
application.name = "MPlayer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "5421"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "mplayer"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
application.icon_name = "mplayer"
module-stream-restore.id = "sink-input-by-application-name:MPlayer"
Client #0
Driver: module-systemd-login.c
Owner Module: 21
Properties:
application.name = "Login Session 1"
systemd-login.session = "1"
Client #3
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "KMix KDE 4"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "773"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "kdeinit4"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
Client #7
Driver: module-x11-xsmp.c
Owner Module: 30
Properties:
application.name = "XSMP Session on KDE as 1048545043000138616110200000006800007"
xsmp.vendor = "KDE"
xsmp.client.id = "1048545043000138616110200000006800007"
Client #8
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "Chrome input"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "919"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "chromium"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
application.icon_name = "chromium"
Client #12
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "Chromium"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "919"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "chromium"
application.language = "en_US.UTF-8"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
application.icon_name = "chromium"
Client #35
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "gtk-gnash"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "4639"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "gtk-gnash"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
Client #37
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "MPlayer"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "5421"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "mplayer"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
application.icon_name = "mplayer"
Client #39
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "18403"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "pactl"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
Sample #0
Name: dialog-warning
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Volume: (invalid)
balance 0.00
Duration: 0.5s
Size: 86.0 KiB
Lazy: no
Filename: n/a
Properties:
media.role = "event"
event.description = "Message dialog shown"
event.id = "dialog-warning"
media.name = "dialog-warning"
media.filename = "/usr/share/sounds/freedesktop/stereo/dialog-warning.oga"
application.name = "Chromium"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "919"
application.process.user = "john"
application.process.host = "HTPC"
application.process.binary = "chromium"
application.language = "en_US.UTF-8"
application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc"
application.process.session_id = "1"
application.icon_name = "chromium"
Card #0
Name: alsa_card.pci-0000_01_00.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aab0"
device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
device.string = "0"
device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-surround-extra0: Digital Surround 5.1 (HDMI 0) Output (sinks: 1, sources: 0, priority: 3100)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 3100)
off: Off (sinks: 0, sources: 0, priority: 0)
Active Profile: output:hdmi-surround-extra0
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-surround-extra0
hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency offset: 0 usec, available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-surround-extra3
-------------- next part --------------
monitor_present 1
eld_valid 1
monitor_name
connection_type HDMI
eld_version [0x2] CEA-861D or below
edid_version [0x0] no CEA EDID Timing Extension block present
manufacture_id 0x0
product_id 0x0
port_id 0x0
support_hdcp 0
support_ai 0
audio_sync_delay 0
speakers [0x5f] FL/FR LFE FC RL/RR RC RLC/RRC
sad_count 6
sad0_coding_type [0x1] LPCM
sad0_channels 8
sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
sad0_bits [0xe0000] 16 20 24
sad1_coding_type [0x2] AC-3
sad1_channels 6
sad1_rates [0xe0] 32000 44100 48000
sad1_max_bitrate 640000
sad2_coding_type [0x7] DTS
sad2_channels 6
sad2_rates [0x6c0] 44100 48000 88200 96000
sad2_max_bitrate 1536000
sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus)
sad3_channels 8
sad3_rates [0xc0] 44100 48000
sad4_coding_type [0xb] DTS-HD
sad4_channels 8
sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000
sad5_coding_type [0xc] MLP (Dolby TrueHD)
sad5_channels 8
sad5_rates [0x1ec0] 44100 48000 88200 96000 176400 192000
More information about the pulseaudio-discuss
mailing list