[pulseaudio-discuss] [PATCH v5 00/39] Refactor of BlueZ 5 support

[Tanu Kaskinen]

On Tue, 2013-09-24 at 19:45 -0300, jprvita at gmail.com wrote:
> From: João Paulo Rechi Vita <jprvita at gmail.com>
> 
> This series reverts the previous support for BlueZ 5, renames the "bluetooth"
> portion of the old modules name for "bluez4", creates a new set of modules for
> BlueZ 5 supporting A2DP sink and source roles, and provides configuration
> options to independently enable/disable each modules set during build. The
> transport acquire/release operations have been reworked to provide a way to
> implement this operations in transport backends out of the bluez5 modules core.
> 
> João Paulo Rechi Vita (39):
>   bluetooth: Remove all devices and adapters when org.bluez goes away
>   bluetooth: Create pa_bluetooth_transport for BlueZ 5 support
>   bluetooth: Register MediaEndpoint1 objects with D-Bus
>   bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()
>   bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
>   bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()
>   bluetooth: Add utility function to send D-Bus messages with reply
>   bluetooth: Get managed objects
>   bluetooth: Create a function to remove only one adapter object
>   bluetooth: Handle InterfacesAdded and InterfacesRemoved
>   bluetooth: Parse BlueZ 5 D-Bus interfaces
>   bluetooth: Parse BlueZ 5 adapter properties
>   bluetooth: Register endpoints with BlueZ 5 adapter
>   bluetooth: Handle PropertiesChanged for org.bluez.Adapter1
>   bluetooth: Parse BlueZ 5 device properties
>   bluetooth: Protect from a misbehaving bluetoothd
>   bluetooth: Handle PropertiesChanged for org.bluez.Device1
>   bluetooth: Handle PropertiesChanged for org.bluez.MediaTransport1
>   bluetooth: Track devices in module-bluez5-discover
>   bluetooth: Create module-bluez5-device
>   bluetooth: Get BlueZ 5 device object
>   bluetooth: Unload module-bluez5-device on device's disconnection
>   bluetooth: Create BlueZ 5 card
>   bluetooth: Create BlueZ 5 card ports
>   bluetooth: Create BlueZ 5 card profile for each audio UUID
>   bluetooth: Initialize profiles for BlueZ 5 cards
>   bluetooth: Create sink for BlueZ 5 cards
>   bluetooth: Create source for BlueZ 5 cards
>   bluetooth: Start / stop I/O thread for BlueZ 5 cards
>   bluetooth: Set card profile for BlueZ 5 cards
>   bluetooth: Create I/O thread function for BlueZ 5 cards
>   bluetooth: Process sink messages for BlueZ 5 cards
>   bluetooth: Process source messages for BlueZ 5 cards
>   bluetooth: Handle changes to BlueZ 5 transports state
>   bluetooth: Implement get_n_used() for module-bluez5-device
>   bluetooth: Fail to load driver if discovery module is not loaded
>   module: Create pa_module_exists()
>   cli-command: Use pa_module_exists() in .ifexists
>   bluetooth: Revive module-bluetooth-discover
> 
>  configure.ac                                      |    1 +
>  src/Makefile.am                                   |   20 +-
>  src/modules/bluetooth/bluez5-util.c               | 1352 ++++++++++++++-
>  src/modules/bluetooth/bluez5-util.h               |   53 +
>  src/modules/bluetooth/module-bluetooth-discover.c |   78 +
>  src/modules/bluetooth/module-bluez5-device.c      | 1898 +++++++++++++++++++++
>  src/modules/bluetooth/module-bluez5-discover.c    |   52 +
>  src/pulsecore/cli-command.c                       |   41 +-
>  src/pulsecore/module.c                            |   55 +
>  src/pulsecore/module.h                            |    2 +
>  10 files changed, 3501 insertions(+), 51 deletions(-)
>  create mode 100644 src/modules/bluetooth/module-bluetooth-discover.c
>  create mode 100644 src/modules/bluetooth/module-bluez5-device.c

I pushed all to master now. I'll post separate patches for the remaining
small issues. Thanks for your persistence with getting these patches
polished!

-- 
Tanu