[pulseaudio-discuss] sticky output device / cant select profile

[Raymond Yau]

>
> I actually like to use the onboard hdmi for audio and also would like to
fix the previous issue. The output device still sticky. Attached is the
output of pactl list.
>
>

Does the graphic driver really allow you to use audio but without using
graphic or enable graphic without audio ?

xrandr --output HDMI2  --set audio off

Did you select HDMI.monitor as default source ?

Source #0
State: RUNNING
Name: alsa_output.pci-0000_00_1b.0.hdmi-stereo-extra2.monitor
Description: Monitor of Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: 0:
100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00
Base Volume: 100% 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.hdmi-stereo-extra2
Latency: 0 usec, configured 20000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7e00000 irq 58"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel
Corporation" device.product.id = "1c20" device.product.name = "6
Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci" Formats: pcm

Source #2
State: RUNNING
Name: VirtualDefault.monitor
Description: Monitor of VirtualDefault
Driver: module-null-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right Owner
Module: 24
Mute: no
Volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00
Base Volume: 100% 0.00 dB
Monitor of Sink: VirtualDefault
Latency: 0 usec, configured 20000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties: device.description = "Monitor of VirtualDefault" device.class =
"monitor"
device.icon_name = "audio-input-microphone"
Formats: pcm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20140312/91057ce7/attachment.html>