[pulseaudio-discuss] [PATCH v10 11/11] bluetooth: policy: Treat bi-directional A2DP profiles as suitable for VOIP
Pali Rohár
pali.rohar at gmail.com
Fri May 3 21:05:23 UTC 2019
Previously module-bluetooth-policy was switching from A2DP to HSP profile
when VOIP application started recording of source. Now it switch to profile
with the highest priority which has both sink and source. In most cases it
is HSP profile, but it can be also bi-directional A2DP profile (e.g.
FastStream codec) as it has better audio quality.
---
src/modules/bluetooth/module-bluetooth-policy.c | 123 ++++++++++++------------
1 file changed, 62 insertions(+), 61 deletions(-)
diff --git a/src/modules/bluetooth/module-bluetooth-policy.c b/src/modules/bluetooth/module-bluetooth-policy.c
index 04313aa84..9652a91fe 100644
--- a/src/modules/bluetooth/module-bluetooth-policy.c
+++ b/src/modules/bluetooth/module-bluetooth-policy.c
@@ -59,7 +59,12 @@ struct userdata {
pa_hook_slot *card_init_profile_slot;
pa_hook_slot *card_unlink_slot;
pa_hook_slot *profile_available_changed_slot;
- pa_hashmap *will_need_revert_card_map;
+ pa_hashmap *profile_switch_map;
+};
+
+struct profile_switch {
+ const char *from_profile;
+ const char *to_profile;
};
/* When a source is created, loopback it to default sink */
@@ -142,43 +147,57 @@ static pa_hook_result_t sink_put_hook_callback(pa_core *c, pa_sink *sink, void *
return PA_HOOK_OK;
}
-static void card_set_profile(struct userdata *u, pa_card *card, bool revert_to_a2dp)
-{
+static void card_set_profile(struct userdata *u, pa_card *card, const char *revert_to_profile_name) {
+ pa_card_profile *iter_profile;
pa_card_profile *profile;
+ struct profile_switch *ps;
+ char *old_profile_name;
void *state;
- /* Find available profile and activate it */
- PA_HASHMAP_FOREACH(profile, card->profiles, state) {
- if (profile->available == PA_AVAILABLE_NO)
- continue;
-
- /* Check for correct profile based on revert_to_a2dp */
- if (revert_to_a2dp) {
- if (!pa_startswith(profile->name, "a2dp_sink"))
+ if (revert_to_profile_name) {
+ profile = pa_hashmap_get(card->profiles, revert_to_profile_name);
+ } else {
+ /* Find highest priority profile with both sink and source */
+ profile = NULL;
+ PA_HASHMAP_FOREACH(iter_profile, card->profiles, state) {
+ if (iter_profile->available == PA_AVAILABLE_NO)
continue;
- } else {
- if (!pa_streq(profile->name, "headset_head_unit"))
+ if (iter_profile->n_sources == 0 || iter_profile->n_sinks == 0)
continue;
+ if (!profile || profile->priority < iter_profile->priority)
+ profile = iter_profile;
}
+ }
- pa_log_debug("Setting card '%s' to profile '%s'", card->name, profile->name);
+ if (!profile) {
+ pa_log_warn("Could not find any suitable profile for card '%s'", card->name);
+ return;
+ }
- if (pa_card_set_profile(card, profile, false) != 0) {
- pa_log_warn("Could not set profile '%s'", profile->name);
- continue;
- }
+ old_profile_name = card->active_profile->name;
+
+ pa_log_debug("Setting card '%s' from profile '%s' to profile '%s'", card->name, old_profile_name, profile->name);
- /* When we are not in revert_to_a2dp phase flag this card for will_need_revert */
- if (!revert_to_a2dp)
- pa_hashmap_put(u->will_need_revert_card_map, card, PA_INT_TO_PTR(1));
+ if (pa_card_set_profile(card, profile, false) != 0) {
+ pa_log_warn("Could not set profile '%s'", profile->name);
+ return;
+ }
- break;
+ /* When not reverting, store data for future reverting */
+ if (!revert_to_profile_name) {
+ ps = pa_xnew0(struct profile_switch, 1);
+ ps->from_profile = old_profile_name;
+ ps->to_profile = profile->name;
+ pa_hashmap_put(u->profile_switch_map, card, ps);
}
}
/* Switch profile for one card */
-static void switch_profile(pa_card *card, bool revert_to_a2dp, void *userdata) {
+static void switch_profile(pa_card *card, bool revert, void *userdata) {
struct userdata *u = userdata;
+ struct profile_switch *ps;
+ const char *from_profile;
+ const char *to_profile;
const char *s;
/* Only consider bluetooth cards */
@@ -186,29 +205,25 @@ static void switch_profile(pa_card *card, bool revert_to_a2dp, void *userdata) {
if (!s || !pa_streq(s, "bluetooth"))
return;
- if (revert_to_a2dp) {
- /* In revert_to_a2dp phase only consider cards with will_need_revert flag and remove it */
- if (!pa_hashmap_remove(u->will_need_revert_card_map, card))
+ if (revert) {
+ /* In revert phase only consider cards which switched profile */
+ if (!(ps = pa_hashmap_remove(u->profile_switch_map, card)))
return;
- /* Skip card if does not have active hsp profile */
- if (!pa_streq(card->active_profile->name, "headset_head_unit"))
- return;
+ from_profile = ps->from_profile;
+ to_profile = ps->to_profile;
+ pa_xfree(ps);
- /* Skip card if already has active a2dp profile */
- if (pa_startswith(card->active_profile->name, "a2dp_sink"))
+ /* Skip card if does not have active profile to which was switched */
+ if (!pa_streq(card->active_profile->name, to_profile))
return;
} else {
- /* Skip card if does not have active a2dp profile */
- if (!pa_startswith(card->active_profile->name, "a2dp_sink"))
- return;
-
- /* Skip card if already has active hsp profile */
- if (pa_streq(card->active_profile->name, "headset_head_unit"))
+ /* Skip card if already has both sink and source */
+ if (card->active_profile->n_sources > 0 && card->active_profile->n_sinks > 0)
return;
}
- card_set_profile(u, card, revert_to_a2dp);
+ card_set_profile(u, card, revert ? from_profile : NULL);
}
/* Return true if we should ignore this source output */
@@ -254,15 +269,15 @@ static unsigned source_output_count(pa_core *c, void *userdata) {
}
/* Switch profile for all cards */
-static void switch_profile_all(pa_idxset *cards, bool revert_to_a2dp, void *userdata) {
+static void switch_profile_all(pa_idxset *cards, bool revert, void *userdata) {
pa_card *card;
uint32_t idx;
PA_IDXSET_FOREACH(card, cards, idx)
- switch_profile(card, revert_to_a2dp, userdata);
+ switch_profile(card, revert, userdata);
}
-/* When a source output is created, switch profile a2dp to profile hsp */
+/* When a source output is created, switch profile to some which has both sink and source */
static pa_hook_result_t source_output_put_hook_callback(pa_core *c, pa_source_output *source_output, void *userdata) {
pa_assert(c);
pa_assert(source_output);
@@ -274,7 +289,7 @@ static pa_hook_result_t source_output_put_hook_callback(pa_core *c, pa_source_ou
return PA_HOOK_OK;
}
-/* When all source outputs are unlinked, switch profile hsp back back to profile a2dp */
+/* When all source outputs are unlinked, switch to previous profile */
static pa_hook_result_t source_output_unlink_hook_callback(pa_core *c, pa_source_output *source_output, void *userdata) {
pa_assert(c);
pa_assert(source_output);
@@ -291,30 +306,16 @@ static pa_hook_result_t source_output_unlink_hook_callback(pa_core *c, pa_source
}
static pa_hook_result_t card_init_profile_hook_callback(pa_core *c, pa_card *card, void *userdata) {
- struct userdata *u = userdata;
- const char *s;
-
pa_assert(c);
pa_assert(card);
+ /* If there are not some source outputs do nothing */
if (source_output_count(c, userdata) == 0)
return PA_HOOK_OK;
- /* Only consider bluetooth cards */
- s = pa_proplist_gets(card->proplist, PA_PROP_DEVICE_BUS);
- if (!s || !pa_streq(s, "bluetooth"))
- return PA_HOOK_OK;
-
- /* Ignore card if has already set other initial profile than a2dp */
- if (card->active_profile &&
- !pa_startswith(card->active_profile->name, "a2dp_sink"))
- return PA_HOOK_OK;
-
- /* Set initial profile to hsp */
- card_set_profile(u, card, false);
+ /* Set initial profile to some with source */
+ switch_profile(card, false, userdata);
- /* Flag this card for will_need_revert */
- pa_hashmap_put(u->will_need_revert_card_map, card, PA_INT_TO_PTR(1));
return PA_HOOK_OK;
}
@@ -447,7 +448,7 @@ int pa__init(pa_module *m) {
goto fail;
}
- u->will_need_revert_card_map = pa_hashmap_new(pa_idxset_trivial_hash_func, pa_idxset_trivial_compare_func);
+ u->profile_switch_map = pa_hashmap_new(pa_idxset_trivial_hash_func, pa_idxset_trivial_compare_func);
u->source_put_slot = pa_hook_connect(&m->core->hooks[PA_CORE_HOOK_SOURCE_PUT], PA_HOOK_NORMAL,
(pa_hook_cb_t) source_put_hook_callback, u);
@@ -512,7 +513,7 @@ void pa__done(pa_module *m) {
if (u->profile_available_changed_slot)
pa_hook_slot_free(u->profile_available_changed_slot);
- pa_hashmap_free(u->will_need_revert_card_map);
+ pa_hashmap_free(u->profile_switch_map);
pa_xfree(u);
}
--
2.11.0
More information about the pulseaudio-discuss
mailing list