[pulseaudio-discuss] using the line-out of my plugable usb audio adapter

[Paul Elliott]

x
Can you post the output of this command while the card is plugged in?
x
OK, here it is:
===
Card #0
Name: alsa_card.pci-0000_02_00.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "2"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfbafc000 irq 39"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:02:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa50"
device.product.name = "Cypress HDMI Audio [Radeon HD 5830/5850/5870 /
6850/6870 Rebrand]"
device.string = "2"
device.description = "Cypress HDMI Audio [Radeon HD 5830/5850/5870 /
6850/6870 Rebrand]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0,
priority: 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1,
sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1,
sources: 0, priority: 800, available: no)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround,
output:hdmi-surround71

Card #2
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfb9f8000 irq 37"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "82801JI (ICH10 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority:
65, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority:
6500, available: no)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1,
sources: 1, priority: 6565, available: no)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources:
0, priority: 1300, available: no)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources:
0, priority: 1200, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources:
0, priority: 1300, available: no)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources:
0, priority: 1200, available: no)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources:
0, priority: 1300, available: no)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources:
0, priority: 1200, available: no)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0,
priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output +
Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output
(sinks: 1, sources: 0, priority: 300, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1
(IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority:
365, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:iec958-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0
usec, available)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:analog-surround-71+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency
offset: 0 usec, not available)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-stereo, output:analog-surround-71,
output:analog-surround-71+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0,
latency offset: 0 usec, availability unknown)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-stereo

Card #3
Name: alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00
Driver: module-alsa-card.c
Owner Module: 27
Properties:
alsa.card = "1"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at
usb-0000:00:1a.0-2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.0-usb-0:2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2:1.0/sound/card1"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0014"
device.product.name = "Audio Adapter (Unitek Y-247A)"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "1"
device.description = "Audio Adapter (Unitek Y-247A)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1,
available: yes)
input:multichannel-input: Multichannel Input (sinks: 0, sources: 1,
priority: 1, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority:
6500, available: yes)
output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input
(sinks: 1, sources: 1, priority: 6501, available: yes)
output:analog-stereo+input:multichannel-input: Analog Stereo Output +
Multichannel Input (sinks: 1, sources: 1, priority: 6501, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0,
priority: 5500, available: yes)
output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output +
Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes)
output:iec958-stereo+input:multichannel-input: Digital Stereo (IEC958)
Output + Multichannel Input (sinks: 1, sources: 1, priority: 5501,
available: yes)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output
(sinks: 1, sources: 0, priority: 300, available: yes)
output:iec958-ac3-surround-51+input:mono-fallback: Digital Surround 5.1
(IEC958/AC3) Output + Mono Input (sinks: 1, sources: 1, priority: 301,
available: yes)
output:iec958-ac3-surround-51+input:multichannel-input: Digital Surround
5.1 (IEC958/AC3) Output + Multichannel Input (sinks: 1, sources: 1,
priority: 301, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0
usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:mono-fallback,
output:analog-stereo+input:mono-fallback,
output:iec958-stereo+input:mono-fallback,
output:iec958-ac3-surround-51+input:mono-fallback
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency
offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:mono-fallback,
output:analog-stereo+input:multichannel-input
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0,
latency offset: 0 usec, availability unknown)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:mono-fallback,
output:iec958-stereo+input:multichannel-input

Card #4
Name: alsa_card.usb-Generic_USB_Camera_200901010001-02
Driver: module-alsa-card.c
Owner Module: 28
Properties:
alsa.card = "3"
alsa.card_name = "USB Camera"
alsa.long_card_name = "Generic USB Camera at usb-0000:00:1d.7-6, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.7-usb-0:6:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.2/sound/card3"
udev.id = "usb-Generic_USB_Camera_200901010001-02"
device.bus = "usb"
device.vendor.id = "0bda"
device.vendor.name = "Realtek Semiconductor Corp."
device.product.id = "3035"
device.product.name = "USB Camera"
device.serial = "Generic_USB_Camera_200901010001"
device.form_factor = "webcam"
device.string = "3"
device.description = "USB Camera"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority:
65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1,
priority: 55, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0
usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0,
latency offset: 0 usec, availability unknown)
Part of profile(s): input:iec958-stereo
===

On Fri, Jan 27, 2023 at 3:17 PM Sean Greenslade <sean at seangreenslade.com>
wrote:

> On January 27, 2023 10:47:45 AM PST, Paul Elliott <
> pelliott at blackpatchpanel.com> wrote:
> >My Plugable usb audio adapter <https://tinyurl.com/ysw3y93p> has two
> >jacks,
> >a pink one and a greenone. One is for (pink) microphone and microphone
> >speaker the other is supposed to be (green) lineout.
> >
> >I want to plug into line out because I want to use the pink one for
> >microphone.
> >
> >Currently sound comes out of the pink one and silence out of the green
> >one.
> >
> >I can not solve this problem by setting a different default sink,
> >because
> >the device shows only one port called analog-output-speaker.
> >
> >How to I get pulse audio to create a port for the green jack, so I can
> >set
> >it into the default?
>
> Can you post the output of this command while the card is plugged in?
>
> $ pactl list cards
>
>
> --Sean
>
>
>

-- 
Paul Elliott                               1(512)837-1096
pelliott at BlackPatchPanel.com               3300 Plaza Drive, apt 1
http://www.free.blackpatchpanel.com/pme/   New Albany, IN 47150
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20230127/dc5b9092/attachment-0001.htm>