[Spice-devel] Using 6 monitors with spice

Roman_Lazarev at troika.ru Roman_Lazarev at troika.ru
Thu Jun 3 07:53:42 PDT 2010


Here's the stack trace for where it falls out... (it remembered my last 
setting of 1024x768 on the 5th QLX device and now doesn't start)...

#0  0x00007fd349999ed5 in raise () from /lib/libc.so.6
#1  0x00007fd34999b3f3 in abort () from /lib/libc.so.6
#2  0x00007fd34d5bba92 in fill_bits (display_channel=0x1f30020, 
in_bitmap=<value optimized out>, drawable=0x44fe9c90) at 
red_client_shared_cache.h:51
#3  0x00007fd34d5bc423 in red_send_qxl_drawable (worker=<value optimized 
out>, display_channel=0x1f30020, item=0x44fe9c90) at red_worker.c:5677
#4  0x00007fd34d5bd1dd in display_channel_push (worker=0x44fad500) at 
red_worker.c:6182
#5  0x00007fd34d5c40cc in red_worker_main (arg=<value optimized out>) at 
red_worker.c:6751
#6  0x00007fd34a5c2fc7 in start_thread () from /lib/libpthread.so.0
#7  0x00007fd349a3759d in clone () from /lib/libc.so.6
#8  0x0000000000000000 in ?? () 





Roman_Lazarev at troika.ru 
Sent by: spice-devel-bounces+roman_lazarev=troika.ru at lists.freedesktop.org
03.06.2010 18:21

To

cc

Subject
[Spice-devel] Using 6 monitors with spice







Howdy! 

Some time ago, Izik said the following: 

>Spice currently support only 4 monitors, however it is just a matter of 
changing a #define to make it run with more 
>monitors.
>What worry me with 8 monitors is the amount of pci memory that we will 
have to allocate I am not sure if there 
>will be enougth memory below the 4giga address

I have assembled a 6 head thin station (if you can call it really thin ;)) 
and wanted to try SPICE with 6 heads. So I went ahead and modified 
vdesktop/qemu/hw/pc.h:#define QXL_MAX_MONITORS 4 to 6 
compiled everything, and started with the "-qxl 6". Windows was able to 
detect two additional monitors, i proceeded with the driver install. I 
then went into Properties and did "Extend my windows desktop..." on the 
5th monitor. qemu crashed. I then restarted, now the 5th monitor was 
enabled. I tried setting resolution to > 834x762 and apply, another 
crash... (640x480 works)... Tried enabling 6th monitor - crash! Tried 
adding "-qxl 6,ram=32" no change... I've also changed #define 
DEFAULT_QXL_RAM_MB_SIZE 64 to 128 and Windows clients stopped booting. I 
tried "-qxl 6,ram=128" but that also has started hanging up the windows vm 
boot... really shooting in the dark here, but hey that's just a try ;) 

I'm using stable 0.4 release, since in the unstable the preformance of my 
virtual machines is very poor. not sure why. I'd be glad to keep testing 6 
monitor setup ;) 

Thanks!!! 
Roman 
_______________________________________________________
 
The information contained in this message may be privileged and 
confidential and protected from disclosure. If you are not the original 
intended recipient, you are hereby notified that any review, 
retransmission, dissemination, or other use of, or taking of any action in 
reliance upon, this information is prohibited. If you have received this 
communication in error, please notify the sender immediately by replying 
to this message and delete it from your computer. Thank you for your 
cooperation. Troika Dialog, Russia. 
If you need assistance please contact our Contact Center (+7495) 258 0500 
or go to www.troika.ru/eng/Contacts/system.wbp 
 _______________________________________________
Spice-devel mailing list
Spice-devel at lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel


_______________________________________________________

The information contained in this message may be privileged and confidential and protected from disclosure. If you are not the original intended recipient, you are hereby notified that any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information is prohibited. If you have received this communication in error, please notify the sender immediately by replying to this message and delete it from your computer. Thank you for your cooperation. Troika Dialog, Russia. 
If you need assistance please contact our Contact Center  (+7495) 258 0500 or go to www.troika.ru/eng/Contacts/system.wbp  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20100603/98985a3f/attachment-0001.htm>


More information about the Spice-devel mailing list