[Spice-devel] Spice on OS/X
Attila Sukosd
attila.sukosd at gmail.com
Tue Apr 26 11:36:09 PDT 2011
Hi,
You can specify it to use gstreamer instead of pulseaudio, and install
gstreamer from macports and it builds fine.
Best Regards,
Attila Sukosd
-----------------------------------------
DTU Computing Center - www.cc.dtu.dk
attila at cc.dtu.dk, gbaras at student.dtu.dk, s070600 at student.dtu.dk
On Tue, Apr 26, 2011 at 8:23 PM, Cliff Sharp <csharp at vbridges.com> wrote:
> I am getting much further with the Third Phase than the rest.
> spice-gtk does require pulseaudio
> It is not in MacPorts (celt051)
>
> When doing a sudo make install with pulseaudio I get the following:
>
> make install-recursive
> Making install in src
> make install-am
> CC libpulsecommon_0.9.22_la-client-conf.lo
> CC libpulsecommon_0.9.22_la-i18n.lo
> CC libpulsecommon_0.9.22_la-fork-detect.lo
> CC libpulsecommon_0.9.22_la-authkey.lo
> CC libpulsecommon_0.9.22_la-conf-parser.lo
> CC libpulsecommon_0.9.22_la-core-error.lo
> CC libpulsecommon_0.9.22_la-core-rtclock.lo
> CC libpulsecommon_0.9.22_la-core-util.lo
> pulsecore/core-util.c: In function 'pa_hexstr':
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop counter
> may overflow [-Wunsafe-loop-optimizations]
> CC libpulsecommon_0.9.22_la-dynarray.lo
> CC libpulsecommon_0.9.22_la-flist.lo
> CC libpulsecommon_0.9.22_la-hashmap.lo
> CC libpulsecommon_0.9.22_la-idxset.lo
> CC libpulsecommon_0.9.22_la-inet_ntop.lo
> CC libpulsecommon_0.9.22_la-inet_pton.lo
> CC libpulsecommon_0.9.22_la-iochannel.lo
> CC libpulsecommon_0.9.22_la-ioline.lo
> CC libpulsecommon_0.9.22_la-ipacl.lo
> pulsecore/ipacl.c: In function 'pa_ip_acl_check':
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
> overflow [-Wunsafe-loop-optimizations]
> CC libpulsecommon_0.9.22_la-lock-autospawn.lo
> CC libpulsecommon_0.9.22_la-log.lo
> CC libpulsecommon_0.9.22_la-ratelimit.lo
> CC libpulsecommon_0.9.22_la-mcalign.lo
> CC libpulsecommon_0.9.22_la-memblock.lo
> CC libpulsecommon_0.9.22_la-memblockq.lo
> CC libpulsecommon_0.9.22_la-memchunk.lo
> CC libpulsecommon_0.9.22_la-once.lo
> CC libpulsecommon_0.9.22_la-packet.lo
> CC libpulsecommon_0.9.22_la-parseaddr.lo
> CC libpulsecommon_0.9.22_la-pdispatch.lo
> CC libpulsecommon_0.9.22_la-pid.lo
> CC libpulsecommon_0.9.22_la-pipe.lo
> CC libpulsecommon_0.9.22_la-poll.lo
> CC libpulsecommon_0.9.22_la-prioq.lo
> CC libpulsecommon_0.9.22_la-memtrap.lo
> CC libpulsecommon_0.9.22_la-aupdate.lo
> CC libpulsecommon_0.9.22_la-proplist-util.lo
> CC libpulsecommon_0.9.22_la-pstream-util.lo
> CC libpulsecommon_0.9.22_la-pstream.lo
> CC libpulsecommon_0.9.22_la-queue.lo
> CC libpulsecommon_0.9.22_la-random.lo
> CC libpulsecommon_0.9.22_la-shm.lo
> CC libpulsecommon_0.9.22_la-bitset.lo
> CC libpulsecommon_0.9.22_la-socket-client.lo
> CC libpulsecommon_0.9.22_la-socket-server.lo
> CC libpulsecommon_0.9.22_la-socket-util.lo
> CC libpulsecommon_0.9.22_la-strbuf.lo
> CC libpulsecommon_0.9.22_la-strlist.lo
> CC libpulsecommon_0.9.22_la-tagstruct.lo
> CC libpulsecommon_0.9.22_la-time-smoother.lo
> CC libpulsecommon_0.9.22_la-tokenizer.lo
> CC libpulsecommon_0.9.22_la-usergroup.lo
> CC libpulsecommon_0.9.22_la-sndfile-util.lo
> In file included from pulsecore/sndfile-util.h:25,
> from pulsecore/sndfile-util.c:34:
> /opt/local/include/sndfile.h:655:5: warning:
> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined
> CC libpulsecommon_0.9.22_la-mutex-posix.lo
> CC libpulsecommon_0.9.22_la-thread-posix.lo
> CC libpulsecommon_0.9.22_la-semaphore-posix.lo
> CC libpulsecommon_0.9.22_la-dbus-util.lo
> CC libpulsecommon_0.9.22_la-rtkit.lo
> CCLD libpulsecommon-0.9.22.la
> CC libpulse_la-channelmap.lo
> CC libpulse_la-context.lo
> CC libpulse_la-error.lo
> CC libpulse_la-ext-device-manager.lo
> CC libpulse_la-ext-stream-restore.lo
> CC libpulse_la-introspect.lo
> CC libpulse_la-mainloop-api.lo
> CC libpulse_la-mainloop-signal.lo
> CC libpulse_la-mainloop.lo
> CC libpulse_la-operation.lo
> CC libpulse_la-proplist.lo
> CC libpulse_la-rtclock.lo
> CC libpulse_la-sample.lo
> CC libpulse_la-scache.lo
> CC libpulse_la-stream.lo
> CC libpulse_la-subscribe.lo
> CC libpulse_la-thread-mainloop.lo
> CC libpulse_la-timeval.lo
> CC libpulse_la-utf8.lo
> CC libpulse_la-util.lo
> CC libpulse_la-volume.lo
> CC libpulse_la-xmalloc.lo
> CCLD libpulse.la
> CC libpulse_simple_la-simple.lo
> CCLD libpulse-simple.la
> CC libpulse_mainloop_glib_la-glib-mainloop.lo
> CCLD libpulse-mainloop-glib.la
> CC libpulsecore_0.9.22_la-asyncmsgq.lo
> CC libpulsecore_0.9.22_la-asyncq.lo
> CC libpulsecore_0.9.22_la-auth-cookie.lo
> CC libpulsecore_0.9.22_la-cli-command.lo
> CC libpulsecore_0.9.22_la-cli-text.lo
> CC libpulsecore_0.9.22_la-client.lo
> CC libpulsecore_0.9.22_la-card.lo
> CC libpulsecore_0.9.22_la-core-scache.lo
> CC libpulsecore_0.9.22_la-core-subscribe.lo
> CC libpulsecore_0.9.22_la-core.lo
> CC libpulsecore_0.9.22_la-envelope.lo
> pulsecore/envelope.c: In function 'envelope_merge':
> pulsecore/envelope.c:407: warning: 'min_k' may be used uninitialized in
> this function [-Wuninitialized]
> pulsecore/envelope.c:395: warning: 'min_f' may be used uninitialized in
> this function [-Wuninitialized]
> pulsecore/envelope.c: In function 'pa_envelope_replace':
> pulsecore/envelope.c:473: warning: 'saved_i' may be used uninitialized in
> this function [-Wuninitialized]
> pulsecore/envelope.c:472: warning: 'saved_f' may be used uninitialized in
> this function [-Wuninitialized]
> CC libpulsecore_0.9.22_la-fdsem.lo
> CC libpulsecore_0.9.22_la-g711.lo
> CC libpulsecore_0.9.22_la-hook-list.lo
> CC libpulsecore_0.9.22_la-ltdl-helper.lo
> CC libpulsecore_0.9.22_la-modargs.lo
> CC libpulsecore_0.9.22_la-modinfo.lo
> CC libpulsecore_0.9.22_la-module.lo
> CC libpulsecore_0.9.22_la-msgobject.lo
> CC libpulsecore_0.9.22_la-namereg.lo
> CC libpulsecore_0.9.22_la-object.lo
> CC libpulsecore_0.9.22_la-play-memblockq.lo
> CC libpulsecore_0.9.22_la-play-memchunk.lo
> CC libpulsecore_0.9.22_la-remap.lo
> CC libpulsecore_0.9.22_la-remap_mmx.lo
> CC libpulsecore_0.9.22_la-remap_sse.lo
> CC libpulsecore_0.9.22_la-resampler.lo
> CC libpulsecore_0.9.22_la-rtpoll.lo
> CC libpulsecore_0.9.22_la-sample-util.lo
> CC libpulsecore_0.9.22_la-cpu-arm.lo
> CC libpulsecore_0.9.22_la-cpu-x86.lo
> CC libpulsecore_0.9.22_la-svolume_c.lo
> CC libpulsecore_0.9.22_la-svolume_arm.lo
> CC libpulsecore_0.9.22_la-svolume_mmx.lo
> CC libpulsecore_0.9.22_la-svolume_sse.lo
> CC libpulsecore_0.9.22_la-sconv-s16be.lo
> CC libpulsecore_0.9.22_la-sconv-s16le.lo
> CC libpulsecore_0.9.22_la-sconv_sse.lo
> CC libpulsecore_0.9.22_la-sconv.lo
> CC libpulsecore_0.9.22_la-shared.lo
> CC libpulsecore_0.9.22_la-shm.lo
> CC libpulsecore_0.9.22_la-sink-input.lo
> CC libpulsecore_0.9.22_la-sink.lo
> CC libpulsecore_0.9.22_la-sioman.lo
> CC libpulsecore_0.9.22_la-sound-file-stream.lo
> In file included from pulsecore/sound-file-stream.c:33:
> /opt/local/include/sndfile.h:655:5: warning:
> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined
> CC libpulsecore_0.9.22_la-sound-file.lo
> In file included from pulsecore/sound-file.c:31:
> /opt/local/include/sndfile.h:655:5: warning:
> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined
> CC libpulsecore_0.9.22_la-source-output.lo
> CC libpulsecore_0.9.22_la-source.lo
> CC libpulsecore_0.9.22_la-start-child.lo
> CC libpulsecore_0.9.22_la-thread-mq.lo
> CC libpulsecore_0.9.22_la-time-smoother.lo
> CC libpulsecore_0.9.22_la-dbus-shared.lo
> CC libpulsecore_0.9.22_la-database-simple.lo
> CC libpulsecore_foreign_la-resample2.lo
> CCLD libpulsecore-foreign.la
> CCLD libpulsecore-0.9.22.la
> CC cli.lo
> CCLD libcli.la
> CC protocol-cli.lo
> CCLD libprotocol-cli.la
> CC protocol-simple.lo
> CCLD libprotocol-simple.la
> CC protocol-http.lo
> CC mime-type.lo
> CCLD libprotocol-http.la
> CC protocol-native.lo
> CCLD libprotocol-native.la
> CC protocol-esound.lo
> CCLD libprotocol-esound.la
> CC rtp.lo
> CC sdp.lo
> CC sap.lo
> CC rtsp_client.lo
> CC headerlist.lo
> CCLD librtp.la
> CC module_console_kit_la-module-console-kit.lo
> CCLD module-console-kit.la
> CC module-cli.lo
> modules/module-cli.c: In function 'module_cli_LTX_pa__init':
> modules/module-cli.c:108: error: 'O_CLOEXEC' undeclared (first use in this
> function)
> modules/module-cli.c:108: error: (Each undeclared identifier is reported
> only once
> modules/module-cli.c:108: error: for each function it appears in.)
> make[3]: *** [module-cli.lo] Error 1
> make[2]: *** [install] Error 2
> make[1]: *** [install-recursive] Error 1
> make: *** [install] Error 2
>
> On Apr 26, 2011, at 12:23 PM, Cliff Sharp wrote:
>
> First Pass:
> Trying to build spice-0.8.1 and all its dependencies by hand but got stuck
> on alsa.
>
> Second Pass:
> I was attempting to use jhbuild for spice-0.8.1
> I was going through building the dependencies that are not already in a
> modulesets by hand under the jhbuild shell.
> My plan was to create a moduleset for spice - but trying to figure out
> modulesets was too difficult and taking way too much time.
> I also got stuck on alsa again
>
> Third Pass:
> I decided to switch to spice-gtk. Mainly because it seems to more
> cross-platform oriented it uses gstreamer
> Right now I am using MacPorts to download and build as many of the
> dependencies as I can.
> Then I will try and build spice-gtk.
>
>
> On Apr 26, 2011, at 10:10 AM, Kai Mosebach wrote:
>
> I just triesbuild the OSX gtk client, my findings :
>
> 1.) Installed gtk2 and gstreamer via ports
> 2.) Finally installed current celt051 after some fiddling
> 3.) Install pyparsing from http://sourceforge.net/projects/pyparsing/
> 4.) Install Text-CSV from
> http://search.cpan.org/~makamaka/Text-CSV-1.21/lib/Text/CSV.pm
> 5.) export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
> 6.) fiddling around with gstreamer/gst/app/*.h + libgstapp
> => install gst-plugins-base via macports
> 7.) ./configure --with-audio=gstreamer
> --without-python --with-coroutine=gthread
> 8.) touch gtk/sym-file (otherwise libtool complains… Any hints?)
> 9.) make (failing w/ the error below, ideas?)
>
> Best Kai
>
> --- SNIP
>
> mp01:spice-gtk-0.5 $ make
> make all-recursive
> Making all in common
> Making all in win
> Making all in my_getopt-1.5
> make[4]: Nothing to be done for `all'.
> make[4]: Nothing to be done for `all-am'.
> make[3]: Nothing to be done for `all-am'.
> Making all in gtk
> make all-am
> CCLD libspice-client-gtk-2.0.la
> Undefined symbols:
> "_spice_inputs_key_press", referenced from:
> _send_key in spice-widget.o
> "_spice_inputs_motion", referenced from:
> _motion_event in spice-widget.o
> "_spice_main_set_display", referenced from:
> _recalc_geometry in spice-widget.o
> "_spice_main_clipboard_grab", referenced from:
> _clipboard_get_targets in spice-widget.o
> "_spice_cursor_channel_get_type", referenced from:
> _channel_destroy in spice-widget.o
> _channel_destroy in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> "_spice_channel_connect", referenced from:
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> "_spice_main_clipboard_release", referenced from:
> _clipboard_owner_change in spice-widget.o
> "_spice_util_get_debug", referenced from:
> _clipboard_clear in spice-widget.o
> _clipboard_got_from_guest in spice-widget.o
> _cursor_reset in spice-widget.o
> _clipboard_received_cb in spice-widget.o
> _clipboard_received_cb in spice-widget.o
> _clipboard_get in spice-widget.o
> _channel_destroy in spice-widget.o
> _cursor_move in spice-widget.o
> _clipboard_get_targets in spice-widget.o
> _clipboard_get_targets in spice-widget.o
> _clipboard_get_targets in spice-widget.o
> _spice_display_send_keys in spice-widget.o
> _recalc_geometry in spice-widget.o
> _try_keyboard_grab in spice-widget.o
> _focus_in_event in spice-widget.o
> _focus_in_event in spice-widget.o
> _enter_event in spice-widget.o
> _spice_display_finalize in spice-widget.o
> _try_keyboard_ungrab in spice-widget.o
> _focus_out_event in spice-widget.o
> _leave_event in spice-widget.o
> _scroll_event in spice-widget.o
> _scroll_event in spice-widget.o
> _button_event in spice-widget.o
> _motion_event in spice-widget.o
> _expose_event in spice-widget.o
> _key_event in spice-widget.o
> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
> "_spice_inputs_set_key_locks", referenced from:
> _sync_keyboard_lock_modifiers in spice-widget.o
> "_spice_main_channel_get_type", referenced from:
> _channel_destroy in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> "_spice_main_clipboard_notify", referenced from:
> _clipboard_received_cb in spice-widget.o
> "_spice_session_get_channels", referenced from:
> _spice_display_new in spice-widget.o
> "_spice_inputs_key_release", referenced from:
> _send_key in spice-widget.o
> "_spice_inputs_channel_get_type", referenced from:
> _channel_destroy in spice-widget.o
> _channel_destroy in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> "_spice_inputs_position", referenced from:
> _motion_event in spice-widget.o
> "_spice_main_clipboard_request", referenced from:
> _clipboard_get in spice-widget.o
> "_spice_inputs_button_press", referenced from:
> _scroll_event in spice-widget.o
> _button_event in spice-widget.o
> "_spice_inputs_button_release", referenced from:
> _scroll_event in spice-widget.o
> _button_event in spice-widget.o
> "_spice_display_channel_get_type", referenced from:
> _channel_destroy in spice-widget.o
> _channel_destroy in spice-widget.o
> _channel_new in spice-widget.o
> _channel_new in spice-widget.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[3]: *** [libspice-client-gtk-2.0.la] Error 1
> make[2]: *** [all] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> From: Cliff Sharp <csharp at vbridges.com>
> Date: Tue, 26 Apr 2011 07:44:34 -0500
> To: Attila Sukosd <attila.sukosd at gmail.com>
> Cc: <spice-devel at lists.freedesktop.org>
> Subject: Re: [Spice-devel] Spice on OS/X
>
> Great suggestion.
> I have been looking into spice-gtk because it does seem like it would be
> much less work.
>
> Thanks.
>
> On Apr 26, 2011, at 3:01 AM, Attila Sukosd wrote:
>
> Hi,
>
>
> This might be a stupid question, but why don't you try to use spice-gtk on
> OS/X instead of spicec ?
> It has everything needed, such as gtk2/gtk3 and gstreamer for audio, all
> cross platform.
>
> Rgrds,
>
> Attila
>
>
> On Mon, Apr 25, 2011 at 11:34 PM, Cliff Sharp <csharp at vbridges.com> wrote:
>
>> When trying to port the alsa-lib to OS/X while porting Spice to OS/X I am
>> having some difficulties resolving issues with alsa-lib. I am using
>> alsa-lib-1.0.24.1
>>
>> After doing a ./configure - I have also tried
>> ./configure --enable-shared=no --enable-static=yes
>>
>> Either way I get the following error in the middle ---
>> ./configure: line 18735: CC_NOUNDEFINED: command not found
>>
>> ___________
>>
>> And then the end of the ./configure looks like this ---
>>
>> configure: creating ./config.status
>> config.status: creating Makefile
>> config.status: creating doc/Makefile
>> config.status: creating doc/pictures/Makefile
>> config.status: creating doc/doxygen.cfg
>> config.status: creating include/Makefile
>> config.status: creating include/sound/Makefile
>> config.status: creating src/Versions
>> config.status: creating src/Makefile
>> config.status: creating src/control/Makefile
>> config.status: creating src/mixer/Makefile
>> config.status: creating src/pcm/Makefile
>> config.status: creating src/pcm/scopes/Makefile
>> config.status: creating src/rawmidi/Makefile
>> config.status: creating src/timer/Makefile
>> config.status: creating src/hwdep/Makefile
>> config.status: creating src/seq/Makefile
>> config.status: creating src/ucm/Makefile
>> config.status: creating src/compat/Makefile
>> config.status: creating src/alisp/Makefile
>> config.status: creating src/conf/Makefile
>> config.status: creating src/conf/cards/Makefile
>> config.status: creating src/conf/pcm/Makefile
>> config.status: creating modules/Makefile
>> config.status: creating modules/mixer/Makefile
>> config.status: creating modules/mixer/simple/Makefile
>> config.status: creating alsalisp/Makefile
>> config.status: creating aserver/Makefile
>> config.status: creating test/Makefile
>> config.status: creating test/lsb/Makefile
>> config.status: creating utils/Makefile
>> config.status: creating utils/alsa-lib.spec
>> config.status: creating utils/alsa.pc
>> config.status: creating include/config.h
>> config.status: include/config.h is unchanged
>> config.status: executing depfiles commands
>> Creating asoundlib.h...
>>
>> Does this look like the ./configure completed successfully???
>>
>> ______________
>>
>> Then as a result of the make I get the following ---
>>
>> Making all in doc
>> Making all in pictures
>> make[2]: Nothing to be done for `all'.
>> make[2]: Nothing to be done for `all-am'.
>> Making all in include
>> make all-recursive
>> Making all in sound
>> make[3]: Nothing to be done for `all'.
>> Making all in src
>> Making all in control
>> CC cards.lo
>> CC tlv.lo
>> CC namehint.lo
>> CC hcontrol.lo
>> CC control.lo
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6097:Expected
>> comma after segment-name
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6101:Expected
>> comma after segment-name
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6101:Rest of
>> line ignored. 1st junk character valued 32 ( ).
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6593:Unknown
>> pseudo-op: .symver
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6593:Rest of
>> line ignored. 1st junk character valued 95 (_).
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6637:Unknown
>> pseudo-op: .symver
>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6637:Rest of
>> line ignored. 1st junk character valued 95 (_).
>> make[2]: *** [control.lo] Error 1
>> make[1]: *** [all-recursive] Error 1
>> make: *** [all-recursive] Error 1
>>
>> I haven't been able to quite figure out what is going with the make
>> errors.
>> I would appreciate it if someone would be able to give me some hints.
>>
>> Thanks
>>
>> ____
>>
>>
>>
>>
>>
>> _______________________________________________
>> Spice-devel mailing list
>> Spice-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/spice-devel
>>
>>
>
> _______________________________________________ Spice-devel mailing list
> Spice-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/spice-devel
>
>
>
> ____
>
> <PastedGraphic-2.tiff>
>
>
>
> ____
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20110426/743ec0b2/attachment-0001.htm>
More information about the Spice-devel
mailing list