[Spice-devel] Spice on OS/X
Attila Sukosd
attila.sukosd at gmail.com
Tue Apr 26 11:39:13 PDT 2011
Also I've attached the patch which fixes a few things here and there... With
this it builds fine.
Best Regards,
Attila Sukosd
-----------------------------------------
DTU Computing Center - www.cc.dtu.dk
attila at cc.dtu.dk, gbaras at student.dtu.dk, s070600 at student.dtu.dk
On Tue, Apr 26, 2011 at 8:36 PM, Attila Sukosd <attila.sukosd at gmail.com>wrote:
> Hi,
>
>
> You can specify it to use gstreamer instead of pulseaudio, and install
> gstreamer from macports and it builds fine.
>
> Best Regards,
>
> Attila Sukosd
>
> -----------------------------------------
> DTU Computing Center - www.cc.dtu.dk
> attila at cc.dtu.dk, gbaras at student.dtu.dk, s070600 at student.dtu.dk
>
>
>
>
> On Tue, Apr 26, 2011 at 8:23 PM, Cliff Sharp <csharp at vbridges.com> wrote:
>
>> I am getting much further with the Third Phase than the rest.
>> spice-gtk does require pulseaudio
>> It is not in MacPorts (celt051)
>>
>> When doing a sudo make install with pulseaudio I get the following:
>>
>> make install-recursive
>> Making install in src
>> make install-am
>> CC libpulsecommon_0.9.22_la-client-conf.lo
>> CC libpulsecommon_0.9.22_la-i18n.lo
>> CC libpulsecommon_0.9.22_la-fork-detect.lo
>> CC libpulsecommon_0.9.22_la-authkey.lo
>> CC libpulsecommon_0.9.22_la-conf-parser.lo
>> CC libpulsecommon_0.9.22_la-core-error.lo
>> CC libpulsecommon_0.9.22_la-core-rtclock.lo
>> CC libpulsecommon_0.9.22_la-core-util.lo
>> pulsecore/core-util.c: In function 'pa_hexstr':
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop
>> counter may overflow [-Wunsafe-loop-optimizations]
>> CC libpulsecommon_0.9.22_la-dynarray.lo
>> CC libpulsecommon_0.9.22_la-flist.lo
>> CC libpulsecommon_0.9.22_la-hashmap.lo
>> CC libpulsecommon_0.9.22_la-idxset.lo
>> CC libpulsecommon_0.9.22_la-inet_ntop.lo
>> CC libpulsecommon_0.9.22_la-inet_pton.lo
>> CC libpulsecommon_0.9.22_la-iochannel.lo
>> CC libpulsecommon_0.9.22_la-ioline.lo
>> CC libpulsecommon_0.9.22_la-ipacl.lo
>> pulsecore/ipacl.c: In function 'pa_ip_acl_check':
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may
>> overflow [-Wunsafe-loop-optimizations]
>> CC libpulsecommon_0.9.22_la-lock-autospawn.lo
>> CC libpulsecommon_0.9.22_la-log.lo
>> CC libpulsecommon_0.9.22_la-ratelimit.lo
>> CC libpulsecommon_0.9.22_la-mcalign.lo
>> CC libpulsecommon_0.9.22_la-memblock.lo
>> CC libpulsecommon_0.9.22_la-memblockq.lo
>> CC libpulsecommon_0.9.22_la-memchunk.lo
>> CC libpulsecommon_0.9.22_la-once.lo
>> CC libpulsecommon_0.9.22_la-packet.lo
>> CC libpulsecommon_0.9.22_la-parseaddr.lo
>> CC libpulsecommon_0.9.22_la-pdispatch.lo
>> CC libpulsecommon_0.9.22_la-pid.lo
>> CC libpulsecommon_0.9.22_la-pipe.lo
>> CC libpulsecommon_0.9.22_la-poll.lo
>> CC libpulsecommon_0.9.22_la-prioq.lo
>> CC libpulsecommon_0.9.22_la-memtrap.lo
>> CC libpulsecommon_0.9.22_la-aupdate.lo
>> CC libpulsecommon_0.9.22_la-proplist-util.lo
>> CC libpulsecommon_0.9.22_la-pstream-util.lo
>> CC libpulsecommon_0.9.22_la-pstream.lo
>> CC libpulsecommon_0.9.22_la-queue.lo
>> CC libpulsecommon_0.9.22_la-random.lo
>> CC libpulsecommon_0.9.22_la-shm.lo
>> CC libpulsecommon_0.9.22_la-bitset.lo
>> CC libpulsecommon_0.9.22_la-socket-client.lo
>> CC libpulsecommon_0.9.22_la-socket-server.lo
>> CC libpulsecommon_0.9.22_la-socket-util.lo
>> CC libpulsecommon_0.9.22_la-strbuf.lo
>> CC libpulsecommon_0.9.22_la-strlist.lo
>> CC libpulsecommon_0.9.22_la-tagstruct.lo
>> CC libpulsecommon_0.9.22_la-time-smoother.lo
>> CC libpulsecommon_0.9.22_la-tokenizer.lo
>> CC libpulsecommon_0.9.22_la-usergroup.lo
>> CC libpulsecommon_0.9.22_la-sndfile-util.lo
>> In file included from pulsecore/sndfile-util.h:25,
>> from pulsecore/sndfile-util.c:34:
>> /opt/local/include/sndfile.h:655:5: warning:
>> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined
>> CC libpulsecommon_0.9.22_la-mutex-posix.lo
>> CC libpulsecommon_0.9.22_la-thread-posix.lo
>> CC libpulsecommon_0.9.22_la-semaphore-posix.lo
>> CC libpulsecommon_0.9.22_la-dbus-util.lo
>> CC libpulsecommon_0.9.22_la-rtkit.lo
>> CCLD libpulsecommon-0.9.22.la
>> CC libpulse_la-channelmap.lo
>> CC libpulse_la-context.lo
>> CC libpulse_la-error.lo
>> CC libpulse_la-ext-device-manager.lo
>> CC libpulse_la-ext-stream-restore.lo
>> CC libpulse_la-introspect.lo
>> CC libpulse_la-mainloop-api.lo
>> CC libpulse_la-mainloop-signal.lo
>> CC libpulse_la-mainloop.lo
>> CC libpulse_la-operation.lo
>> CC libpulse_la-proplist.lo
>> CC libpulse_la-rtclock.lo
>> CC libpulse_la-sample.lo
>> CC libpulse_la-scache.lo
>> CC libpulse_la-stream.lo
>> CC libpulse_la-subscribe.lo
>> CC libpulse_la-thread-mainloop.lo
>> CC libpulse_la-timeval.lo
>> CC libpulse_la-utf8.lo
>> CC libpulse_la-util.lo
>> CC libpulse_la-volume.lo
>> CC libpulse_la-xmalloc.lo
>> CCLD libpulse.la
>> CC libpulse_simple_la-simple.lo
>> CCLD libpulse-simple.la
>> CC libpulse_mainloop_glib_la-glib-mainloop.lo
>> CCLD libpulse-mainloop-glib.la
>> CC libpulsecore_0.9.22_la-asyncmsgq.lo
>> CC libpulsecore_0.9.22_la-asyncq.lo
>> CC libpulsecore_0.9.22_la-auth-cookie.lo
>> CC libpulsecore_0.9.22_la-cli-command.lo
>> CC libpulsecore_0.9.22_la-cli-text.lo
>> CC libpulsecore_0.9.22_la-client.lo
>> CC libpulsecore_0.9.22_la-card.lo
>> CC libpulsecore_0.9.22_la-core-scache.lo
>> CC libpulsecore_0.9.22_la-core-subscribe.lo
>> CC libpulsecore_0.9.22_la-core.lo
>> CC libpulsecore_0.9.22_la-envelope.lo
>> pulsecore/envelope.c: In function 'envelope_merge':
>> pulsecore/envelope.c:407: warning: 'min_k' may be used uninitialized in
>> this function [-Wuninitialized]
>> pulsecore/envelope.c:395: warning: 'min_f' may be used uninitialized in
>> this function [-Wuninitialized]
>> pulsecore/envelope.c: In function 'pa_envelope_replace':
>> pulsecore/envelope.c:473: warning: 'saved_i' may be used uninitialized in
>> this function [-Wuninitialized]
>> pulsecore/envelope.c:472: warning: 'saved_f' may be used uninitialized in
>> this function [-Wuninitialized]
>> CC libpulsecore_0.9.22_la-fdsem.lo
>> CC libpulsecore_0.9.22_la-g711.lo
>> CC libpulsecore_0.9.22_la-hook-list.lo
>> CC libpulsecore_0.9.22_la-ltdl-helper.lo
>> CC libpulsecore_0.9.22_la-modargs.lo
>> CC libpulsecore_0.9.22_la-modinfo.lo
>> CC libpulsecore_0.9.22_la-module.lo
>> CC libpulsecore_0.9.22_la-msgobject.lo
>> CC libpulsecore_0.9.22_la-namereg.lo
>> CC libpulsecore_0.9.22_la-object.lo
>> CC libpulsecore_0.9.22_la-play-memblockq.lo
>> CC libpulsecore_0.9.22_la-play-memchunk.lo
>> CC libpulsecore_0.9.22_la-remap.lo
>> CC libpulsecore_0.9.22_la-remap_mmx.lo
>> CC libpulsecore_0.9.22_la-remap_sse.lo
>> CC libpulsecore_0.9.22_la-resampler.lo
>> CC libpulsecore_0.9.22_la-rtpoll.lo
>> CC libpulsecore_0.9.22_la-sample-util.lo
>> CC libpulsecore_0.9.22_la-cpu-arm.lo
>> CC libpulsecore_0.9.22_la-cpu-x86.lo
>> CC libpulsecore_0.9.22_la-svolume_c.lo
>> CC libpulsecore_0.9.22_la-svolume_arm.lo
>> CC libpulsecore_0.9.22_la-svolume_mmx.lo
>> CC libpulsecore_0.9.22_la-svolume_sse.lo
>> CC libpulsecore_0.9.22_la-sconv-s16be.lo
>> CC libpulsecore_0.9.22_la-sconv-s16le.lo
>> CC libpulsecore_0.9.22_la-sconv_sse.lo
>> CC libpulsecore_0.9.22_la-sconv.lo
>> CC libpulsecore_0.9.22_la-shared.lo
>> CC libpulsecore_0.9.22_la-shm.lo
>> CC libpulsecore_0.9.22_la-sink-input.lo
>> CC libpulsecore_0.9.22_la-sink.lo
>> CC libpulsecore_0.9.22_la-sioman.lo
>> CC libpulsecore_0.9.22_la-sound-file-stream.lo
>> In file included from pulsecore/sound-file-stream.c:33:
>> /opt/local/include/sndfile.h:655:5: warning:
>> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined
>> CC libpulsecore_0.9.22_la-sound-file.lo
>> In file included from pulsecore/sound-file.c:31:
>> /opt/local/include/sndfile.h:655:5: warning:
>> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined
>> CC libpulsecore_0.9.22_la-source-output.lo
>> CC libpulsecore_0.9.22_la-source.lo
>> CC libpulsecore_0.9.22_la-start-child.lo
>> CC libpulsecore_0.9.22_la-thread-mq.lo
>> CC libpulsecore_0.9.22_la-time-smoother.lo
>> CC libpulsecore_0.9.22_la-dbus-shared.lo
>> CC libpulsecore_0.9.22_la-database-simple.lo
>> CC libpulsecore_foreign_la-resample2.lo
>> CCLD libpulsecore-foreign.la
>> CCLD libpulsecore-0.9.22.la
>> CC cli.lo
>> CCLD libcli.la
>> CC protocol-cli.lo
>> CCLD libprotocol-cli.la
>> CC protocol-simple.lo
>> CCLD libprotocol-simple.la
>> CC protocol-http.lo
>> CC mime-type.lo
>> CCLD libprotocol-http.la
>> CC protocol-native.lo
>> CCLD libprotocol-native.la
>> CC protocol-esound.lo
>> CCLD libprotocol-esound.la
>> CC rtp.lo
>> CC sdp.lo
>> CC sap.lo
>> CC rtsp_client.lo
>> CC headerlist.lo
>> CCLD librtp.la
>> CC module_console_kit_la-module-console-kit.lo
>> CCLD module-console-kit.la
>> CC module-cli.lo
>> modules/module-cli.c: In function 'module_cli_LTX_pa__init':
>> modules/module-cli.c:108: error: 'O_CLOEXEC' undeclared (first use in this
>> function)
>> modules/module-cli.c:108: error: (Each undeclared identifier is reported
>> only once
>> modules/module-cli.c:108: error: for each function it appears in.)
>> make[3]: *** [module-cli.lo] Error 1
>> make[2]: *** [install] Error 2
>> make[1]: *** [install-recursive] Error 1
>> make: *** [install] Error 2
>>
>> On Apr 26, 2011, at 12:23 PM, Cliff Sharp wrote:
>>
>> First Pass:
>> Trying to build spice-0.8.1 and all its dependencies by hand but got stuck
>> on alsa.
>>
>> Second Pass:
>> I was attempting to use jhbuild for spice-0.8.1
>> I was going through building the dependencies that are not already in a
>> modulesets by hand under the jhbuild shell.
>> My plan was to create a moduleset for spice - but trying to figure out
>> modulesets was too difficult and taking way too much time.
>> I also got stuck on alsa again
>>
>> Third Pass:
>> I decided to switch to spice-gtk. Mainly because it seems to more
>> cross-platform oriented it uses gstreamer
>> Right now I am using MacPorts to download and build as many of the
>> dependencies as I can.
>> Then I will try and build spice-gtk.
>>
>>
>> On Apr 26, 2011, at 10:10 AM, Kai Mosebach wrote:
>>
>> I just triesbuild the OSX gtk client, my findings :
>>
>> 1.) Installed gtk2 and gstreamer via ports
>> 2.) Finally installed current celt051 after some fiddling
>> 3.) Install pyparsing from http://sourceforge.net/projects/pyparsing/
>> 4.) Install Text-CSV from
>> http://search.cpan.org/~makamaka/Text-CSV-1.21/lib/Text/CSV.pm
>> 5.) export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
>> 6.) fiddling around with gstreamer/gst/app/*.h + libgstapp
>> => install gst-plugins-base via macports
>> 7.) ./configure --with-audio=gstreamer
>> --without-python --with-coroutine=gthread
>> 8.) touch gtk/sym-file (otherwise libtool complains… Any hints?)
>> 9.) make (failing w/ the error below, ideas?)
>>
>> Best Kai
>>
>> --- SNIP
>>
>> mp01:spice-gtk-0.5 $ make
>> make all-recursive
>> Making all in common
>> Making all in win
>> Making all in my_getopt-1.5
>> make[4]: Nothing to be done for `all'.
>> make[4]: Nothing to be done for `all-am'.
>> make[3]: Nothing to be done for `all-am'.
>> Making all in gtk
>> make all-am
>> CCLD libspice-client-gtk-2.0.la
>> Undefined symbols:
>> "_spice_inputs_key_press", referenced from:
>> _send_key in spice-widget.o
>> "_spice_inputs_motion", referenced from:
>> _motion_event in spice-widget.o
>> "_spice_main_set_display", referenced from:
>> _recalc_geometry in spice-widget.o
>> "_spice_main_clipboard_grab", referenced from:
>> _clipboard_get_targets in spice-widget.o
>> "_spice_cursor_channel_get_type", referenced from:
>> _channel_destroy in spice-widget.o
>> _channel_destroy in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> "_spice_channel_connect", referenced from:
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> "_spice_main_clipboard_release", referenced from:
>> _clipboard_owner_change in spice-widget.o
>> "_spice_util_get_debug", referenced from:
>> _clipboard_clear in spice-widget.o
>> _clipboard_got_from_guest in spice-widget.o
>> _cursor_reset in spice-widget.o
>> _clipboard_received_cb in spice-widget.o
>> _clipboard_received_cb in spice-widget.o
>> _clipboard_get in spice-widget.o
>> _channel_destroy in spice-widget.o
>> _cursor_move in spice-widget.o
>> _clipboard_get_targets in spice-widget.o
>> _clipboard_get_targets in spice-widget.o
>> _clipboard_get_targets in spice-widget.o
>> _spice_display_send_keys in spice-widget.o
>> _recalc_geometry in spice-widget.o
>> _try_keyboard_grab in spice-widget.o
>> _focus_in_event in spice-widget.o
>> _focus_in_event in spice-widget.o
>> _enter_event in spice-widget.o
>> _spice_display_finalize in spice-widget.o
>> _try_keyboard_ungrab in spice-widget.o
>> _focus_out_event in spice-widget.o
>> _leave_event in spice-widget.o
>> _scroll_event in spice-widget.o
>> _scroll_event in spice-widget.o
>> _button_event in spice-widget.o
>> _motion_event in spice-widget.o
>> _expose_event in spice-widget.o
>> _key_event in spice-widget.o
>> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
>> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
>> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
>> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o
>> "_spice_inputs_set_key_locks", referenced from:
>> _sync_keyboard_lock_modifiers in spice-widget.o
>> "_spice_main_channel_get_type", referenced from:
>> _channel_destroy in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> "_spice_main_clipboard_notify", referenced from:
>> _clipboard_received_cb in spice-widget.o
>> "_spice_session_get_channels", referenced from:
>> _spice_display_new in spice-widget.o
>> "_spice_inputs_key_release", referenced from:
>> _send_key in spice-widget.o
>> "_spice_inputs_channel_get_type", referenced from:
>> _channel_destroy in spice-widget.o
>> _channel_destroy in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> "_spice_inputs_position", referenced from:
>> _motion_event in spice-widget.o
>> "_spice_main_clipboard_request", referenced from:
>> _clipboard_get in spice-widget.o
>> "_spice_inputs_button_press", referenced from:
>> _scroll_event in spice-widget.o
>> _button_event in spice-widget.o
>> "_spice_inputs_button_release", referenced from:
>> _scroll_event in spice-widget.o
>> _button_event in spice-widget.o
>> "_spice_display_channel_get_type", referenced from:
>> _channel_destroy in spice-widget.o
>> _channel_destroy in spice-widget.o
>> _channel_new in spice-widget.o
>> _channel_new in spice-widget.o
>> ld: symbol(s) not found
>> collect2: ld returned 1 exit status
>> make[3]: *** [libspice-client-gtk-2.0.la] Error 1
>> make[2]: *** [all] Error 2
>> make[1]: *** [all-recursive] Error 1
>> make: *** [all] Error 2
>>
>> From: Cliff Sharp <csharp at vbridges.com>
>> Date: Tue, 26 Apr 2011 07:44:34 -0500
>> To: Attila Sukosd <attila.sukosd at gmail.com>
>> Cc: <spice-devel at lists.freedesktop.org>
>> Subject: Re: [Spice-devel] Spice on OS/X
>>
>> Great suggestion.
>> I have been looking into spice-gtk because it does seem like it would be
>> much less work.
>>
>> Thanks.
>>
>> On Apr 26, 2011, at 3:01 AM, Attila Sukosd wrote:
>>
>> Hi,
>>
>>
>> This might be a stupid question, but why don't you try to use spice-gtk on
>> OS/X instead of spicec ?
>> It has everything needed, such as gtk2/gtk3 and gstreamer for audio, all
>> cross platform.
>>
>> Rgrds,
>>
>> Attila
>>
>>
>> On Mon, Apr 25, 2011 at 11:34 PM, Cliff Sharp <csharp at vbridges.com>wrote:
>>
>>> When trying to port the alsa-lib to OS/X while porting Spice to OS/X I
>>> am having some difficulties resolving issues with alsa-lib. I am using
>>> alsa-lib-1.0.24.1
>>>
>>> After doing a ./configure - I have also tried
>>> ./configure --enable-shared=no --enable-static=yes
>>>
>>> Either way I get the following error in the middle ---
>>> ./configure: line 18735: CC_NOUNDEFINED: command not found
>>>
>>> ___________
>>>
>>> And then the end of the ./configure looks like this ---
>>>
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: creating doc/Makefile
>>> config.status: creating doc/pictures/Makefile
>>> config.status: creating doc/doxygen.cfg
>>> config.status: creating include/Makefile
>>> config.status: creating include/sound/Makefile
>>> config.status: creating src/Versions
>>> config.status: creating src/Makefile
>>> config.status: creating src/control/Makefile
>>> config.status: creating src/mixer/Makefile
>>> config.status: creating src/pcm/Makefile
>>> config.status: creating src/pcm/scopes/Makefile
>>> config.status: creating src/rawmidi/Makefile
>>> config.status: creating src/timer/Makefile
>>> config.status: creating src/hwdep/Makefile
>>> config.status: creating src/seq/Makefile
>>> config.status: creating src/ucm/Makefile
>>> config.status: creating src/compat/Makefile
>>> config.status: creating src/alisp/Makefile
>>> config.status: creating src/conf/Makefile
>>> config.status: creating src/conf/cards/Makefile
>>> config.status: creating src/conf/pcm/Makefile
>>> config.status: creating modules/Makefile
>>> config.status: creating modules/mixer/Makefile
>>> config.status: creating modules/mixer/simple/Makefile
>>> config.status: creating alsalisp/Makefile
>>> config.status: creating aserver/Makefile
>>> config.status: creating test/Makefile
>>> config.status: creating test/lsb/Makefile
>>> config.status: creating utils/Makefile
>>> config.status: creating utils/alsa-lib.spec
>>> config.status: creating utils/alsa.pc
>>> config.status: creating include/config.h
>>> config.status: include/config.h is unchanged
>>> config.status: executing depfiles commands
>>> Creating asoundlib.h...
>>>
>>> Does this look like the ./configure completed successfully???
>>>
>>> ______________
>>>
>>> Then as a result of the make I get the following ---
>>>
>>> Making all in doc
>>> Making all in pictures
>>> make[2]: Nothing to be done for `all'.
>>> make[2]: Nothing to be done for `all-am'.
>>> Making all in include
>>> make all-recursive
>>> Making all in sound
>>> make[3]: Nothing to be done for `all'.
>>> Making all in src
>>> Making all in control
>>> CC cards.lo
>>> CC tlv.lo
>>> CC namehint.lo
>>> CC hcontrol.lo
>>> CC control.lo
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6097:Expected
>>> comma after segment-name
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6101:Expected
>>> comma after segment-name
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6101:Rest
>>> of line ignored. 1st junk character valued 32 ( ).
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6593:Unknown
>>> pseudo-op: .symver
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6593:Rest
>>> of line ignored. 1st junk character valued 95 (_).
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6637:Unknown
>>> pseudo-op: .symver
>>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6637:Rest
>>> of line ignored. 1st junk character valued 95 (_).
>>> make[2]: *** [control.lo] Error 1
>>> make[1]: *** [all-recursive] Error 1
>>> make: *** [all-recursive] Error 1
>>>
>>> I haven't been able to quite figure out what is going with the make
>>> errors.
>>> I would appreciate it if someone would be able to give me some hints.
>>>
>>> Thanks
>>>
>>> ____
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Spice-devel mailing list
>>> Spice-devel at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/spice-devel
>>>
>>>
>>
>> _______________________________________________ Spice-devel mailing list
>> Spice-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/spice-devel
>>
>>
>>
>> ____
>>
>> <PastedGraphic-2.tiff>
>>
>>
>>
>> ____
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20110426/cf5ccaff/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: spice-gtk.patch
Type: text/x-patch
Size: 2730 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20110426/cf5ccaff/attachment-0001.bin>
More information about the Spice-devel
mailing list