[Spice-devel] windows guest file transfer -- am I using the correct howto?

[Gianluca Cecchi]

On Mon, Feb 9, 2015 at 4:29 PM, Marc-André Lureau <
marcandre.lureau at gmail.com> wrote:

> Hi
>
> https://elmarco.fedorapeople.org/spice-webdavd-x86-0.4.17-72db.msi
>
> It starts for me during installation. Hope you get there too!
>
> --
> Marc-André Lureau
>


ok, I was able to install the new package and service starts during install
phase too.
So I shutdown and power off the wm and start from there

in /var/log/libvirt/qemu/w7.log when I start vm
2015-02-09 16:00:31.348+0000: starting up
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
QEMU_AUDIO_DRV=spice /usr/bin/qemu-kvm -name w7 -S -machine
pc-i440fx-1.4,accel=kvm,usb=off -m 3072 -realtime mlock=off -smp
1,sockets=1,cores=1,threads=1 -uuid b3c34d75-9f04-9648-f995-d26d62dcb2dd
-no-user-config -nodefaults -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/w7.monitor,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime
-no-shutdown -boot strict=on -device
piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive
if=none,id=drive-ide0-1-0,readonly=on,format=raw -device
ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive
file=/var/lib/libvirt/images/w7.img,if=none,id=drive-virtio-disk0,format=raw,cache=none
-device
virtio-blk-pci,scsi=off,bus=pci.0,addr=0x7,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-netdev tap,fd=24,id=hostnet0,vhost=on,vhostfd=25 -device
virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:d3:8e:29,bus=pci.0,addr=0x3
-chardev pty,id=charserial0 -device
isa-serial,chardev=charserial0,id=serial0 -chardev
spicevmc,id=charchannel0,name=vdagent -device
virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0
-chardev spiceport,id=charchannel1,name=org.spice-space.webdav.0 -device
virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.spice-space.webdav.0
-device usb-tablet,id=input0 -spice
port=5900,addr=127.0.0.1,disable-ticketing,seamless-migration=on -device
qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,bus=pci.0,addr=0x2
-device intel-hda,id=sound0,bus=pci.0,addr=0x4 -device
hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device
virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 -msg timestamp=on
char device redirected to /dev/pts/1 (label charserial0)

Then I start spicy
sudo spicy -h localhost -p 5900

(spicy:17609): GSpice-CRITICAL **: spice_session_set_shared_dir: assertion
'dir != NULL' failed
GSpice-Message: main channel: opened
port 0x1c6c640 org.spice-space.webdav.0: opened

when I run spicy command, in /var/log/libvirt/qemu/w7.log I get:
main_channel_link: add main channel client
main_channel_handle_parsed: agent start
main_channel_handle_parsed: net test: latency 0.669000 ms, bitrate
6282208588 bps (5991.180981 Mbps)
inputs_connect: inputs channel client create
red_dispatcher_set_cursor_peer:

In windows guest I see the service as started and  the command "netstat -an
| more" gives the guest listening:

  TCP    0.0.0.0:9843           0.0.0.0:0              LISTENING

But it seems that the "net use" registry key that the map-drive.bat
creates, actually is not able to connect....
I see no network disk mapped...
And if I manually run it I get

C:\SPICE webdavd>map-drive.bat

C:\SPICE webdavd>net use * http://localhost:9843/
System error 67 has occurred.

The network name cannot be found.


C:\SPICE webdavd>REG ADD
"HKCU\Software\Microsoft\Windows\CurrentVersion\Explore
r\MountPoints2\##localhost at 9843#DavWWWRoot" /v  "_LabelFromReg" /t REG_SZ
/d "Sp
ice client" /f
The operation completed successfully.

Could it be anything with syntax of net use itself? the localhost is
resolved...
C:\SPICE webdavd>ping localhost

Pinging tekkawin7 [::1] with 32 bytes of data:
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Reply from ::1: time<1ms

Ping statistics for ::1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

If it can influence, inside my windows\system32\drivers\etc\hosts I have
these sort of lines:
# localhost name resolution is handled within DNS itself.
# 127.0.0.1       localhost
# ::1             localhost


I also tried to follow this M$ note
http://support.microsoft.com/kb/841215#LetMeFixItMyselfAlways



*HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\ParametersNote
The
mapping is as follows: - 0 - Basic authentication disabled- 1 - Basic
authentication enabled for Secure Sockets Layer (SSL) shares only- 2 or
greater - Basic authentication enabled for SSL shares and for non-SSL
shares*
My default was 1 and I changed also to 2 and then reboot but I keep getting
the same error code 67 from the net use command

Gianluca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20150209/3213d846/attachment.html>