[Spice-devel] [RFC PATCH v2] qxl: allows to specify head limit to qxl driver
Frediano Ziglio
fziglio at redhat.com
Fri Jun 12 07:05:10 PDT 2015
This patch allow to limit number of heads using qxl driver. By default
qxl driver is not limited on any kind on head use so can decide to use
as much heads.
libvirt has this as a video card parameter (actually set to 1 but not
used). This parameter will allow to limit setting a use can do (which
could be confusing).
This patch rely on some change in spice-protocol which are not still
accepted. See
http://lists.freedesktop.org/archives/spice-devel/2015-June/020221.html.
Signed-off-by: Frediano Ziglio <fziglio at redhat.com>
---
hw/display/qxl.c | 26 +++++++++++++++++++++-----
hw/display/qxl.h | 3 +++
2 files changed, 24 insertions(+), 5 deletions(-)
Change from v1:
- check spice-server version.
diff --git a/hw/display/qxl.c b/hw/display/qxl.c
index b220e2d..d6e9369 100644
--- a/hw/display/qxl.c
+++ b/hw/display/qxl.c
@@ -272,6 +272,12 @@ static void qxl_spice_monitors_config_async(PCIQXLDevice *qxl, int replay)
QXL_COOKIE_TYPE_POST_LOAD_MONITORS_CONFIG,
0));
} else {
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ if (qxl->max_outputs) {
+ spice_qxl_set_monitors_config_limit(&qxl->ssd.qxl,
+ qxl->max_outputs);
+ }
+#endif
qxl->guest_monitors_config = qxl->ram->monitors_config;
spice_qxl_monitors_config_async(&qxl->ssd.qxl,
qxl->ram->monitors_config,
@@ -992,6 +998,7 @@ static int interface_client_monitors_config(QXLInstance *sin,
PCIQXLDevice *qxl = container_of(sin, PCIQXLDevice, ssd.qxl);
QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
int i;
+ unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
if (qxl->revision < 4) {
trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
@@ -1014,17 +1021,23 @@ static int interface_client_monitors_config(QXLInstance *sin,
if (!monitors_config) {
return 1;
}
+
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ /* limit number of outputs based on setting limit */
+ if (qxl->max_outputs && qxl->max_outputs <= max_outputs) {
+ max_outputs = qxl->max_outputs;
+ }
+#endif
+
memset(&rom->client_monitors_config, 0,
sizeof(rom->client_monitors_config));
rom->client_monitors_config.count = monitors_config->num_of_monitors;
/* monitors_config->flags ignored */
- if (rom->client_monitors_config.count >=
- ARRAY_SIZE(rom->client_monitors_config.heads)) {
+ if (rom->client_monitors_config.count >= max_outputs) {
trace_qxl_client_monitors_config_capped(qxl->id,
monitors_config->num_of_monitors,
- ARRAY_SIZE(rom->client_monitors_config.heads));
- rom->client_monitors_config.count =
- ARRAY_SIZE(rom->client_monitors_config.heads);
+ max_outputs);
+ rom->client_monitors_config.count = max_outputs;
}
for (i = 0 ; i < rom->client_monitors_config.count ; ++i) {
VDAgentMonConfig *monitor = &monitors_config->monitors[i];
@@ -2278,6 +2291,9 @@ static Property qxl_properties[] = {
DEFINE_PROP_UINT32("vram64_size_mb", PCIQXLDevice, vram_size_mb, -1),
DEFINE_PROP_UINT32("vgamem_mb", PCIQXLDevice, vgamem_size_mb, 16),
DEFINE_PROP_INT32("surfaces", PCIQXLDevice, ssd.num_surfaces, 1024),
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ DEFINE_PROP_UINT16("max_outputs", PCIQXLDevice, max_outputs, 0),
+#endif
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/display/qxl.h b/hw/display/qxl.h
index deddd54..2ddf065 100644
--- a/hw/display/qxl.h
+++ b/hw/display/qxl.h
@@ -99,6 +99,9 @@ typedef struct PCIQXLDevice {
QXLModes *modes;
uint32_t rom_size;
MemoryRegion rom_bar;
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ uint16_t max_outputs;
+#endif
/* vram pci bar */
uint32_t vram_size;
--
2.1.0
More information about the Spice-devel
mailing list