[Spice-devel] [RFC PATCH v2] qxl: allows to specify head limit to qxl driver
Christophe Fergeau
cfergeau at redhat.com
Thu Jun 18 06:51:11 PDT 2015
On Fri, Jun 12, 2015 at 03:05:10PM +0100, Frediano Ziglio wrote:
> This patch allow to limit number of heads using qxl driver. By default
> qxl driver is not limited on any kind on head use so can decide to use
> as much heads.
>
> libvirt has this as a video card parameter (actually set to 1 but not
> used). This parameter will allow to limit setting a use can do (which
> could be confusing).
>
> This patch rely on some change in spice-protocol which are not still
> accepted. See
> http://lists.freedesktop.org/archives/spice-devel/2015-June/020221.html.
>
> Signed-off-by: Frediano Ziglio <fziglio at redhat.com>
> ---
> hw/display/qxl.c | 26 +++++++++++++++++++++-----
> hw/display/qxl.h | 3 +++
> 2 files changed, 24 insertions(+), 5 deletions(-)
>
> Change from v1:
> - check spice-server version.
>
> diff --git a/hw/display/qxl.c b/hw/display/qxl.c
> index b220e2d..d6e9369 100644
> --- a/hw/display/qxl.c
> +++ b/hw/display/qxl.c
> @@ -272,6 +272,12 @@ static void qxl_spice_monitors_config_async(PCIQXLDevice *qxl, int replay)
> QXL_COOKIE_TYPE_POST_LOAD_MONITORS_CONFIG,
> 0));
> } else {
> +#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
> + if (qxl->max_outputs) {
> + spice_qxl_set_monitors_config_limit(&qxl->ssd.qxl,
> + qxl->max_outputs);
> + }
> +#endif
> qxl->guest_monitors_config = qxl->ram->monitors_config;
> spice_qxl_monitors_config_async(&qxl->ssd.qxl,
> qxl->ram->monitors_config,
> @@ -992,6 +998,7 @@ static int interface_client_monitors_config(QXLInstance *sin,
> PCIQXLDevice *qxl = container_of(sin, PCIQXLDevice, ssd.qxl);
> QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
> int i;
> + unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
>
> if (qxl->revision < 4) {
> trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
> @@ -1014,17 +1021,23 @@ static int interface_client_monitors_config(QXLInstance *sin,
> if (!monitors_config) {
> return 1;
> }
> +
> +#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
> + /* limit number of outputs based on setting limit */
« based on 'max_outputs' command line parameter » maybe ?
Patch looks good to me.
Christophe
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20150618/0da2924e/attachment.sig>
More information about the Spice-devel
mailing list