[PATCH proto/xorgproto] Remove and .gitignore more autotools artefacts

Jon Turney jon.turney at dronecode.org.uk
Thu Mar 1 13:52:19 UTC 2018


Signed-off-by: Jon Turney <jon.turney at dronecode.org.uk>
---
 .gitignore |   2 +
 install-sh | 316 -----------------------------------------------------
 missing    | 360 -------------------------------------------------------------
 3 files changed, 2 insertions(+), 676 deletions(-)
 delete mode 100755 install-sh
 delete mode 100755 missing

diff --git a/.gitignore b/.gitignore
index b674cd2..1baa360 100644
--- a/.gitignore
+++ b/.gitignore
@@ -13,6 +13,8 @@ config.sub
 configure
 do-not-use-config.h
 do-not-use-config.h.in
+install-sh
 man/Xprint.7
+missing
 stamp-h1
 stamp-h2
diff --git a/install-sh b/install-sh
deleted file mode 100755
index 77bc381..0000000
--- a/install-sh
+++ /dev/null
@@ -1,316 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2004-02-15.20
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 -d DIRECTORIES...
-
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
-
-Options:
--b=TRANSFORMBASENAME
--c         copy source (using $cpprog) instead of moving (using $mvprog).
--d         create directories instead of installing files.
--g GROUP   $chgrp installed files to GROUP.
--m MODE    $chmod installed files to MODE.
--o USER    $chown installed files to USER.
--s         strip installed files (using $stripprog).
--t=TRANSFORM
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-        shift
-        continue;;
-
-    -c) instcmd=$cpprog
-        shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit 0;;
-
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-        shift
-        continue;;
-
-    --version) echo "$0 $scriptversion"; exit 0;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	test -n "$dir_arg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
-	break;;
-  esac
-done
-
-if test -z "$1"; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    src=
-
-    if test -d "$dst"; then
-      instcmd=:
-      chmodcmd=
-    else
-      instcmd=$mkdirprog
-    fi
-  else
-    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      dst=$dst/`basename "$src"`
-    fi
-  fi
-
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-  # Make sure that the destination directory exists.
-
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
-
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    IFS=$oIFS
-
-    pathcomp=
-
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
-      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp" || lasterr=$?
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
-      fi
-      pathcomp=$pathcomp/
-    done
-  fi
-
-  if test -n "$dir_arg"; then
-    $doit $instcmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
-  else
-    # If we're going to rename the final executable, determine the name now.
-    if test -z "$transformarg"; then
-      dstfile=`basename "$dst"`
-    else
-      dstfile=`basename "$dst" $transformbasename \
-               | sed $transformarg`$transformbasename
-    fi
-
-    # don't allow the sed command to completely eliminate the filename.
-    test -z "$dstfile" && dstfile=`basename "$dst"`
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-    trap '(exit $?); exit' 1 2 13 15
-
-    # Move or copy the file name to the temp name
-    $doit $instcmd "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $instcmd $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now remove or move aside any old file at destination location.  We
-    # try this two ways since rm can't unlink itself on some systems and
-    # the destination file might be busy for other reasons.  In this case,
-    # the final cleanup might fail but the new file should still install
-    # successfully.
-    {
-      if test -f "$dstdir/$dstfile"; then
-        $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-        || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-        || {
-	  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-	  (exit 1); exit
-        }
-      else
-        :
-      fi
-    } &&
-
-    # Now rename the file to the real destination.
-    $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-  fi || { (exit 1); exit; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/missing b/missing
deleted file mode 100755
index e7ef83a..0000000
--- a/missing
+++ /dev/null
@@ -1,360 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2003-09-02.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake at gnu.org>."
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
-- 
2.16.2



More information about the xorg-devel mailing list